In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range.
ALSA: caiaq: fix stack out-of-bounds read in init_card
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stac
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
ALSA: ctxfi: Check the error for index mapping
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function.
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
hwmon: (occ) Fix division by zero in occ_show_power_1()
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (occ) Fix division by zero in occ_show_power_1()
In occ_show_power_1() case 1, the accumulator is divided by
update_tag without checking for zero. If no samples have been
collected yet (e.g. during early boot when the sensor block is
included but hasn't been updated), update_tag is zero, causing
a kernel divide-by-zero crash.
The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by
zero issue") only addressed occ_get_powr_avg() used by
occ_show_power_2() and occ_show_power_a0(). This separate code
path in occ_show_power_1() was missed.
Fix this by reusing
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately.
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix incorrect free_irq() variable
The handler for the IRQ part of this driver is mpu3050->trig but,
in the teardown free_irq() is called with handler mpu3050.
Use correct IRQ handler when calling free_irq().
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
iio: gyro: mpu3050: Fix irq resource leak
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124.
iio: gyro: mpu3050: Move iio_device_register() to correct location
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Move iio_device_register() to correct location
iio_device_register() should be at the end of the probe function to
prevent race conditions.
Place iio_device_register() at the end of the probe function and place
iio_device_unregister() accordingly.
usb: ulpi: fix double free in ulpi_register_interface() error path
In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix double free in ulpi_register_interface() error path
When device_register() fails, ulpi_register() calls put_device() on
ulpi->dev.
The device release callback ulpi_dev_release() drops the OF node
reference and frees ulpi, but the current error path in
ulpi_register_interface() then calls kfree(ulpi) again, causing a
double free.
Let put_device() handle the cleanup through ulpi_dev_release() and
avoid freeing ulpi again in ulpi_register_interface().
usb: usbtmc: Flush anchored URBs in usbtmc_release
In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: Flush anchored URBs in usbtmc_release
When calling usbtmc_release, pending anchored URBs must be flushed or
killed to prevent use-after-free errors (e.g. in the HCD giveback
path). Call usbtmc_draw_down() to allow anchored URBs to be completed.
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
When the gadget endpoint is disabled or not yet configured, the ep->desc
pointer can be NULL. This leads to a NULL pointer dereference when
__cdns3_gadget_ep_queue() is called, causing a kernel crash.
Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the
standard return code for unconfigured endpoints.
This prevents potential crashes when ep_queue is called on endpoints
that are not ready.
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
usb: cdns3: gadget: fix state inconsistency on gadget init failure
In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: gadget: fix state inconsistency on gadget init failure
When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode
while software state remains INACTIVE, creating hardware/software state
inconsistency.
When switching to host mode via sysfs:
echo host > /sys/class/usb_role/13180000.usb-role-switch/role
The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error,
so cdns_role_stop() skips cleanup because state is still INACTIVE.
This violates the DRD controller design specification (Figure22),
which requires returning to idle state before
Media · CVSS 5.5EPSS 0,13%Sin corrección publicada
bridge: br_nd_send: validate ND option lengths
In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: validate ND option lengths
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
Media · CVSS 4.7EPSS 0,09%Sin corrección publicada
comedi: dt2815: add hardware detection to prevent crash
In the Linux kernel, the following vulnerability has been resolved:
comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: err
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
In the Linux kernel, the following vulnerability has been resolved:
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure.
comedi: me_daq: Fix potential overrun of firmware buffer
In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the
comedi: me4000: Fix potential overrun of firmware buffer
In the Linux kernel, the following vulnerability has been resolved:
comedi: me4000: Fix potential overrun of firmware buffer
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmwar
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
vxlan: validate ND option lengths in vxlan_na_create
In the Linux kernel, the following vulnerability has been resolved:
vxlan: validate ND option lengths in vxlan_na_create
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
Media · CVSS 5.5EPSS 0,13%Sin corrección publicada
net: ftgmac100: fix ring allocation unwind on open failure
In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style.