sctp: validate STALE_COOKIE cause length before reading staleness
In the Linux kernel, the following vulnerability has been resolved:
sctp: validate STALE_COOKIE cause length before reading staleness
When an ERROR chunk with a STALE_COOKIE cause is received in the
COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure
of Staleness that follows the cause header:
err = (struct sctp_errhdr *)(chunk->skb->data);
stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err)));
err is the first cause in the chunk, not the STALE_COOKIE cause that
caused the dispatch, and nothing guarantees the staleness field is
present. sctp_walk_errors() only requires a cause to be as long as the
4-byte header, so f
net: qualcomm: rmnet: validate MAP frame length before ingress parsing
In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: validate MAP frame length before ingress parsing
When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes
the skb straight to __rmnet_map_ingress_handler(), skipping the length
validation that rmnet_map_deaggregate() performs on the aggregated path.
The parser then dereferences the MAP header and csum header/trailer based on
the on-wire pkt_len without checking skb->len, so a short frame is read out
of bounds:
BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet
Read of size 1 at addr ffff88801118ed00 by task expl
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated with
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
When the scatterlist ring is full or nearly full, bpf_msg_push_data()
enters a copy fallback path and computes copy + len for the page
allocation size. Since len comes from BPF with arg3_type = ARG_ANYTHING
and both are u32, a crafted len can wrap the sum to a small value,
causing an undersized allocation followed by an out-of-bounds memcpy.
BUG: unable to handle page fault for address: ffffed104089a402
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
Call Trace:
__asan_memcpy (mm/kasan/shadow.c:105)
bpf_msg_pu
net: usb: net1080: validate packet_len before pad-byte access in rx_fixup
In the Linux kernel, the following vulnerability has been resolved:
net: usb: net1080: validate packet_len before pad-byte access in rx_fixup
For an even packet_len, net1080_rx_fixup() reads the pad byte at
skb->data[packet_len] before the skb->len != packet_len check further
down, and packet_len is only bounded against NC_MAX_PACKET. A malicious
NetChip 1080 device can send a short frame advertising a large even
packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the
skb:
BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup
Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14
...
net1080_rx_fixup (driver
In the Linux kernel, the following vulnerability has been resolved:
drm/edid: fix OOB read in drm_parse_tiled_block()
drm_parse_tiled_block() casts the DisplayID block to a
struct displayid_tiled_block and reads the full fixed layout up to
tile->topology_id[7] without checking block->num_bytes. The DisplayID
iterator only validates the declared payload length, so a crafted EDID
can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or
DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at
the end of a DisplayID extension. The read then runs past the end of the
exact-sized kmemdup()'d EDID allocation, a heap out-
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__
tipc: fix use-after-free of the discoverer in tipc_disc_rcv()
In the Linux kernel, the following vulnerability has been resolved:
tipc: fix use-after-free of the discoverer in tipc_disc_rcv()
bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),
but tipc_disc_rcv() still dereferences b->disc in RX softirq under
rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).
L2 bearers are safe thanks to the synchronize_net() in
tipc_disable_l2_media(), but the UDP bearer defers that call to the
cleanup_bearer() workqueue, so the discoverer is freed with no grace
period:
BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149)
Read of size 8 at addr ffff88802348b72
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns
usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()
In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()
genelink_rx_fixup() splits an aggregated RX frame into its individual
packets, using a per-packet length taken from device-supplied data. That
length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared
against how many bytes were actually received.
A malicious GeneLink (GL620A) device can therefore send a short URB whose
header claims packet_count > 1 and a first packet of up to 1514 bytes.
skb_put_data(gl_skb, packet->packet_data, size);
then copies past the end of the receive buffer and hands
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
eir_create_adv_data() builds the advertising data into a fixed-size
buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"
AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies
the per-instance data without checking that it still fits:
memcpy(ptr, adv->adv_data, adv->adv_data_len);
tlv_data_max_len() only reserves those 3 bytes when the user-supplied
flags carry a managed-flags bit, so an instance added with flags == 0 is
accepted with adv_data_len up to the full buffer. A
In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, match
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
A
crypto: qat - remove unused character device and IOCTLs
In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - remove unused character device and IOCTLs
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
Sashiko identified a deadlock when the console flow is engaged [1].
When console flow control is enabled (UPF_CONS_FLOW),
s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and
s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().
The serial core framework invokes the .stop_tx() and .start_tx()
callbacks with the port->lock spinlock already held. Furthermore, all
internal driver paths that invoke stop_tx (such as the DMA TX
completion handler s3c24xx_serial_tx_dma_complete() or the PI
userfaultfd: gate must_wait writability check on pte_present()
In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered a
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there
In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreo
usb: gadget: function: rndis: add length check for header
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed.
iio: accel: bmc150: clamp the device-reported FIFO frame count
In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not