Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
usb: cdns3: gadget: fix state inconsistency on gadget init failure
In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: gadget: fix state inconsistency on gadget init failure
When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode
while software state remains INACTIVE, creating hardware/software state
inconsistency.
When switching to host mode via sysfs:
echo host > /sys/class/usb_role/13180000.usb-role-switch/role
The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error,
so cdns_role_stop() skips cleanup because state is still INACTIVE.
This violates the DRD controller design specification (Figure22),
which requires returning to idle state before
Media · CVSS 5.5EPSS 0,13%Sin corrección publicada
bridge: br_nd_send: validate ND option lengths
In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: validate ND option lengths
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
Media · CVSS 4.7EPSS 0,09%Sin corrección publicada
comedi: dt2815: add hardware detection to prevent crash
In the Linux kernel, the following vulnerability has been resolved:
comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: err
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
In the Linux kernel, the following vulnerability has been resolved:
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure.
comedi: me_daq: Fix potential overrun of firmware buffer
In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the
comedi: me4000: Fix potential overrun of firmware buffer
In the Linux kernel, the following vulnerability has been resolved:
comedi: me4000: Fix potential overrun of firmware buffer
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmwar
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
vxlan: validate ND option lengths in vxlan_na_create
In the Linux kernel, the following vulnerability has been resolved:
vxlan: validate ND option lengths in vxlan_na_create
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
Media · CVSS 5.5EPSS 0,13%Sin corrección publicada
net: ftgmac100: fix ring allocation unwind on open failure
In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style.
Media · CVSS 4.7EPSS 0,09%Sin corrección publicada
usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() cr
Media · CVSS 5.5EPSS 0,16%Sin corrección publicada
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Us
Media · CVSS 5.5EPSS 0,16%Sin corrección publicada
usb: gadget: f_eem: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_eem: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_m
Media · CVSS 5.5EPSS 0,16%Sin corrección publicada
usb: gadget: f_subset: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Media · CVSS 5.5EPSS 0,16%Sin corrección publicada
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Media · CVSS 5.5EPSS 0,13%Sin corrección publicada
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, th
usb: gadget: f_uac1_legacy: validate control request size
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate control request size
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object.
f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path
smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL
and the default QUERY_INFO path. The QUERY_INFO branch clamps
qi.input_buffer_length to the server-reported OutputBufferLength and then
copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but
it never verifies that the flexible-array payload actually fits within
rsp_iov[1].iov_len.
A malicious server can return OutputBufferLength larger than the actual
QUERY_INFO response, causing copy_to_user() to walk past the respon
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
ALSA: caiaq: take a reference on the USB device in create_card()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: take a reference on the USB device in create_card()
The caiaq driver stores a pointer to the parent USB device in
cdev->chip.dev but never takes a reference on it. The card's
private_free callback, snd_usb_caiaq_card_free(), can run
asynchronously via snd_card_free_when_closed() after the USB
device has already been disconnected and freed, so any access to
cdev->chip.dev in that path dereferences a freed usb_device.
On top of the refcounting issue, the current card_free implementation
calls usb_reset_device(cdev->chip.dev). A reset in a free callback
is inappr
net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd()
In the Linux kernel, the following vulnerability has been resolved:
net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd()
In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points
directly into the mmap'd TX ring buffer shared with userspace. The
kernel validates the header via __packet_snd_vnet_parse() but then
re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent
userspace thread can modify the vnet_hdr fields between validation
and use, bypassing all safety checks.
The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr
to a stack-local variable. All other vnet_hdr consumers in the kernel
(t
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h