fbcon: fix NULL pointer dereference for a console without vc_data
In the Linux kernel, the following vulnerability has been resolved:
fbcon: fix NULL pointer dereference for a console without vc_data
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc
drm/radeon: fix integer overflow in radeon_align_pitch()
In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix integer overflow in radeon_align_pitch()
radeon_align_pitch() has the same kind of overflow issue as the old
amdgpu helper: both the alignment round-up add and the final
'aligned * cpp' calculation can overflow signed int.
If that wraps, radeon_mode_dumb_create() can end up returning an
invalid pitch or creating a zero-sized dumb buffer.
Fix this by using check_add_overflow() for the alignment round-up and
check_mul_overflow() for the final pitch calculation, returning 0 on
overflow. Also reject zero pitch and size in
radeon_mode_dumb_create().
Found via
drm/radeon: fix memory leak in radeon_ring_restore() on lock failure
In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix memory leak in radeon_ring_restore() on lock failure
radeon_ring_restore() takes ownership of the data buffer allocated by
radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in
the non-restore branch; in the restore branch it relies on
radeon_ring_restore() to free it.
If radeon_ring_lock() fails, the function returned early without calling
kvfree(data), leaking the ring backup buffer on every GPU reset that
fails at the lock stage. During repeated GPU resets this causes
cumulative kernel memory exhaustion.
Free data before returning the e
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer
In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit
descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both
firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478),
causing an out-of-bounds read from the pre-allocated DMA buffer when
skb_put_data copies new_len bytes. The USB transport already validates
this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the
PCIe path does not.
Add a check that new_len does not exceed the DMA buffer si
wifi: ath9k: fix OOB access from firmware tx status queue ID
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: fix OOB access from firmware tx status queue ID
ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a
4-bit hardware field (0-15), but the txq array only has
ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array
access.
Add a bounds check on ts.qid before using it as an array index.
vxlan: Fix potential null-ptr-deref in vxlan_gro_prepare_receive().
In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix potential null-ptr-deref in vxlan_gro_prepare_receive().
udp_tunnel_sock_release() could set sk->sk_user_data to NULL
while vxlan_gro_prepare_receive() is running.
Let's check if rcu_dereference_sk_user_data() is NULL after
skb_gro_remcsum_init().
In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix race between OPP addition and lookup
A race exists between dev_pm_opp_add_dynamic() and
dev_pm_opp_find_freq_exact():
CPU0 (add) CPU1 (lookup)
------------------------------- ------------------------------
_opp_add()
mutex_lock()
list_add(&new_opp->node, head)
mutex_unlock() _opp_table_find_key()
mutex_lock()
dev_pm_opp_get(opp)
kref_get()
crypto: atmel-sha204a - fix blocking and non-blocking rng logic
In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix blocking and non-blocking rng logic
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.............
evm: terminate and bound the evm_xattrs read buffer
In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer().
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
general protection fault:
IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier
In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier
mlx5_ib_alloc_transport_domain() allocates a transport domain and then
may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked.
Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an
error. Also return 0 explicitly in the no-loopback-capability success
branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init().
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as wel
RDMA/srpt: fix integer overflow in immediate data length check
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: fix integer overflow in immediate data length check
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison.
tracing: Bound synthetic-field strings with seq_buf
In the Linux kernel, the following vulnerability has been resolved:
tracing: Bound synthetic-field strings with seq_buf
The synthetic field helpers build a prefixed synthetic variable name and
a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The
current code appends those strings with raw strcat(), so long key lists,
field names, or saved filters can run past the end of the staging
buffers.
Build both strings with seq_buf and propagate -E2BIG if either the
synthetic variable name or the generated command exceeds
MAX_FILTER_STR_VAL. This keeps the existing tracing-side limit while
using the helper intended for bounded command c
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix log flood after cmd_mbox failure
hns_roce_cmd_mbox() is the command interface between driver and
hardware. When hardware is abnormal, the unlimited error printings
after hns_roce_cmd_mbox() failure will cause log flood and even
system crash.
Replace ibdev_err() and ibdev_warn() with their ratelimited versions
in the error handling path after hns_roce_cmd_mbox() (and its wrappers
hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails.
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_p
ALSA: seq: midi: Serialize output teardown with event_input
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: midi: Serialize output teardown with event_input
event_process_midi() borrows msynth->output_rfile.output and then
passes the substream to dump_midi() and snd_rawmidi_kernel_write()
without synchronizing with the output open/close transition.
midisynth_use() also publishes output_rfile before
snd_rawmidi_output_params() has finished.
The last midisynth_unuse() can therefore release the same rawmidi file
and free substream->runtime before snd_rawmidi_kernel_write1() takes
its runtime buffer reference. That leaves the event_input path using a
stale substream or ru
nvmet-tcp: fix page fragment cache leak in error path
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix page fragment cache leak in error path
In nvmet_tcp_alloc_queue(), when a connection is closed during the
allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN),
the error handling jumps to out_destroy_sq and then to out_ida_remove
without draining the page fragment cache.
Although nvmet_tcp_free_cmd() is called in some error paths to release
individual page fragments, the underlying page cache reference held by
queue->pf_cache is never released. The first allocation using pf_cache
is the call to nvmet_tcp_alloc_cmd() for queue->connect, whi
nvme-multipath: fix flex array size in struct nvme_ns_head
In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix flex array size in struct nvme_ns_head
struct nvme_ns_head contains a flexible array member, current_path[],
which is indexed using the NUMA node ID:
head->current_path[numa_node_id()]
The structure is currently allocated as:
size = sizeof(struct nvme_ns_head) +
(num_possible_nodes() * sizeof(struct nvme_ns *));
head = kzalloc(size, GFP_KERNEL);
This allocation assumes that NUMA node IDs are sequential and densely
packed from 0 .. num_possible_nodes() - 1. While this assumption holds
on many systems, it is not always true on some architectures s
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a c