Vulnerabilidades de linux-gcp · Página 127

quota: Fix race of dquot_scan_active() with quota deactivation

In the Linux kernel, the following vulnerability has been resolved: quota: Fix race of dquot_scan_active() with quota deactivation dquot_scan_active() can race with quota deactivation in quota_release_workfn() like: CPU0 (quota_release_workfn) CPU1 (dquot_scan_active) ============================== ============================== spin_lock(&dq_list_lock); list_replace_init( &releasing_dquots, &rls_head); /* dquot X on rls_head, dq_count == 0, DQ_ACTIVE_B still set */ spin_unlock(&dq_list_lock); synchronize_srcu(&dquot_srcu); spin_lock(&dq_list_lock);

efi/capsule-loader: fix incorrect sizeof in phys array reallocation

In the Linux kernel, the following vulnerability has been resolved: efi/capsule-loader: fix incorrect sizeof in phys array reallocation The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be causing an undersized allocation. The allocation is also inconsistent with the initial array allocation in efi_capsule_open() that allocates one entry with sizeof(phys_addr_t), and the efi_capsule_write() function that stores phys_addr_t values (not pointers) via page_to_phys(). On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this goes unnotic

memory: tegra124-emc: Fix dll_change check

In the Linux kernel, the following vulnerability has been resolved: memory: tegra124-emc: Fix dll_change check The code checking whether the specified memory timing enables DLL in the EMRS register was reversed. DLL is enabled if bit A0 is low. Fix the check.

• Actualiza a 5.4.0-1165.174

ocfs2/dlm: validate qr_numregions in dlm_match_regions()

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-

• Actualiza a 5.4.0-1166.175

ocfs2: fix listxattr handling when the buffer is full

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix listxattr handling when the buffer is full [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_obj

ocfs2: validate bg_bits during freefrag scan

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate bg_bits during freefrag scan [BUG] A crafted filesystem can trigger an out-of-bounds bitmap walk when OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT. BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] BUG: KASAN: use-after-free

ocfs2: validate group add input before caching

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x1

HID: usbhid: fix deadlock in hid_post_reset()

In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them.

bpf, arm64: Fix off-by-one in check_imm signed range check

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for c

greybus: raw: fix use-after-free on cdev close

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: <TASK> cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80

greybus: raw: fix use-after-free if write is called after disconnect

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free if write is called after disconnect If a user writes to the chardev after disconnect has been called, the kernel panics with the following trace (with CONFIG_INIT_ON_FREE_DEFAULT_ON=y): BUG: kernel NULL pointer dereference, address: 0000000000000218 ... Call Trace: <TASK> gb_operation_create_common+0x61/0x180 gb_operation_create_flags+0x28/0xa0 gb_operation_sync_timeout+0x6f/0x100 raw_write+0x7b/0xc7 [gb_raw] vfs_write+0xcf/0x420 ? task_mm_cid_work+0x136

scsi: target: core: Fix integer overflow in UNMAP bounds check

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix integer overflow in UNMAP bounds check sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file.

f2fs: avoid reading already updated pages during GC

In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid reading already updated pages during GC We found the following issue during fuzz testing: page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9 memcg:f8ffff800e269c00 aops:f2fs_meta_aops ino:2 flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a) raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618 raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00 page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio)) page_owner tracks the page as allocated post_alloc_

f2fs: fix data loss caused by incorrect use of nat_entry flag

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix data loss caused by incorrect use of nat_entry flag Data loss can occur when fsync is performed on a newly created file (before any checkpoint has been written) concurrently with a checkpoint operation. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes

crypto: ccp - copy IV using skcipher ivsize

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.

erofs: unify lcn as u64 for 32-bit platforms

In the Linux kernel, the following vulnerability has been resolved: erofs: unify lcn as u64 for 32-bit platforms As sashiko reported [1], `lcn` was typed as `unsigned long` (or `unsigned int` sometimes), which is only 32 bits wide on 32-bit platforms, which causes `(lcn << lclusterbits)` to be truncated at 4 GiB. In order to consolidate the logic, just use `u64` consistently around the codebase. [1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com

nexthop: fix IPv6 route referencing IPv4 nexthop

In the Linux kernel, the following vulnerability has been resolved: nexthop: fix IPv6 route referencing IPv4 nexthop syzbot reported a panic [1] [2]. When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag of all groups containing this nexthop is not updated. This is because nh_group_v4_update is only called when replacing AF_INET to AF_INET6, but the reverse direction (AF_INET6 to AF_INET) is missed. This allows a stale has_v4=false to bypass fib6_check_nexthop, causing IPv6 routes to be attached to groups that effectively contain only AF_INET members. Subsequent route lookups then call nexthop_fib6_nh() which returns NULL

net/sched: taprio: fix use-after-free in advance_sched() on schedule switch

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calc

ice: fix double-free of tx_buf skb

In the Linux kernel, the following vulnerability has been resolved: ice: fix double-free of tx_buf skb If ice_tso() or ice_tx_csum() fail, the error path in ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points to it and is marked as valid (ICE_TX_BUF_SKB). 'next_to_use' remains unchanged, so the potential problem will likely fix itself when the next packet is transmitted and the tx_buf gets overwritten. But if there is no next packet and the interface is brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf() will find the tx_buf and free the skb for the second time. The fix is to reset the tx_buf type

ipv6: fix possible UAF in icmpv6_rcv()

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call.

• Actualiza a 5.4.0-1165.174