Media · CVSS 5.5EPSS 0,25%Sin corrección publicada
loop: Check for overflow while configuring loop
In the Linux kernel, the following vulnerability has been resolved:
loop: Check for overflow while configuring loop
The userspace can configure a loop using an ioctl call, wherein
a configuration of type loop_config is passed (see lo_ioctl()'s
case on line 1550 of drivers/block/loop.c). This proceeds to call
loop_configure() which in turn calls loop_set_status_from_info()
(see line 1050 of loop.c), passing &config->info which is of type
loop_info64*. This function then sets the appropriate values, like
the offset.
loop_device has lo_offset of type loff_t (see line 52 of loop.c),
which is typdef-chained to long long, whereas loop_info64 has
s390: fix double free of GS and RI CBs on fork() failure
In the Linux kernel, the following vulnerability has been resolved:
s390: fix double free of GS and RI CBs on fork() failure
The pointers for guarded storage and runtime instrumentation control
blocks are stored in the thread_struct of the associated task. These
pointers are initially copied on fork() via arch_dup_task_struct()
and then cleared via copy_thread() before fork() returns. If fork()
happens to fail after the initial task dup and before copy_thread(),
the newly allocated task and associated thread_struct memory are
freed via free_task() -> arch_release_task_struct(). This results in
a double free of the guarded storage and runtim
Media · CVSS 5.5EPSS 0,25%Sin corrección publicada
media: pvrusb2: fix memory leak in pvr_probe
In the Linux kernel, the following vulnerability has been resolved:
media: pvrusb2: fix memory leak in pvr_probe
The error handling code in pvr2_hdw_create forgets to unregister the
v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create,
it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL,
which leads to that pvr2_hdw_destroy directly returns.
Fix this by adding v4l2_device_unregister to decrease the refcount of
usb interface.
USB: gadget: Fix use-after-free Read in usb_udc_uevent()
In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: Fix use-after-free Read in usb_udc_uevent()
The syzbot fuzzer found a race between uevent callbacks and gadget
driver unregistration that can cause a use-after-free bug:
---------------------------------------------------------------
BUG: KASAN: use-after-free in usb_udc_uevent+0x11f/0x130
drivers/usb/gadget/udc/core.c:1732
Read of size 8 at addr ffff888078ce2050 by task udevd/2968
CPU: 1 PID: 2968 Comm: udevd Not tainted 5.19.0-rc4-next-20220628-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
06/29/2022
Call Trace:
Media · CVSS 6.8EPSS 0,25%Sin corrección publicada
fbdev: fb_pm2fb: Avoid potential divide by zero error
In the Linux kernel, the following vulnerability has been resolved:
fbdev: fb_pm2fb: Avoid potential divide by zero error
In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.
divide e
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:
register_ftrace_function
ftrace_startup
__register_ftrace_function
...
add_ftrace_ops(&ftrace_ops_list, ops)
...
...
ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
...
return 0 // ops is in the ftrace_ops_list.
When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
ftr
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix use after free bugs
_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl()
functions don't do anything except free the "pcmd" pointer. It
results in a use after free. Delete them.
Media · CVSS 5.5EPSS 0,25%Sin corrección publicada
Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().
It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().
Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().
In the Linux kernel, the following vulnerability has been resolved:
vt: Clear selection before changing the font
When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().
Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix array out of bounds access
The driver does not check if the cooling state passed to
gpio_fan_set_cur_state() exceeds the maximum cooling state as
stored in fan_data->num_speeds. Since the cooling state is later
used as an array index in set_fan_speed(), an array out of bounds
access can occur.
This can be exploited by setting the state of the thermal cooling device
to arbitrary values, causing for example a kernel oops when unavailable
memory is accessed this way.
Example kernel oops:
[ 807.987276] Unable to handle kernel paging request at virtual ad
Media · CVSS 5.5EPSS 0,26%Sin corrección publicada
wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected
When we are not connected to a channel, sending channel "switch"
announcement doesn't make any sense.
The BSS list is empty in that case. This causes the for loop in
cfg80211_get_bss() to be bypassed, so the function returns NULL
(check line 1424 of net/wireless/scan.c), causing the WARN_ON()
in ieee80211_ibss_csa_beacon() to get triggered (check line 500
of net/mac80211/ibss.c), which was consequently reported on the
syzkaller dashboard.
Thus, check if we have an existing connection before generatin
Media · CVSS 6.8EPSS 0,23%Sin corrección publicada
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
A null pointer dereference can happen when attempting to access the
"gsm->receive()" function in gsmld_receive_buf(). Currently, the code
assumes that gsm->recieve is only called after MUX activation.
Since the gsmld_receive_buf() function can be accessed without the need to
initialize the MUX, the gsm->receive() function will not be set and a
NULL pointer dereference will occur.
Fix this by avoiding the call to "gsm->receive()" in case the function is
not initialized by adding a sanity check.
Call Trace:
Media · CVSS 5.5EPSS 0,18%Sin corrección publicada
media: mceusb: Use new usb_control_msg_*() routines
In the Linux kernel, the following vulnerability has been resolved:
media: mceusb: Use new usb_control_msg_*() routines
Automatic kernel fuzzing led to a WARN about invalid pipe direction in
the mceusb driver:
------------[ cut here ]------------
usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_e
Media · CVSS 5.5EPSS 0,19%Sin corrección publicada
USB: core: Prevent nested device-reset calls
In the Linux kernel, the following vulnerability has been resolved:
USB: core: Prevent nested device-reset calls
Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:
============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/stor
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix UAF in ieee80211_scan_rx()
ieee80211_scan_rx() tries to access scan_req->flags after a
null check, but a UAF is observed when the scan is completed
and __ieee80211_scan_completed() executes, which then calls
cfg80211_scan_done() leading to the freeing of scan_req.
Since scan_req is rcu_dereference()'d, prevent the racing in
__ieee80211_scan_completed() by ensuring that from mac80211's
POV it is no longer accessed from an RCU read critical section
before we call cfg80211_scan_done().
crypto: algif_hash - fix double free in hash_accept
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_hash - fix double free in hash_accept
If accept(2) is called on socket type algif_hash with
MSG_MORE flag set and crypto_ahash_import fails,
sk2 is freed. However, it is also freed in af_alg_release,
leading to slab-use-after-free error.
ALSA: pcm: Fix race of buffer access at PCM OSS layer
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Fix race of buffer access at PCM OSS layer
The PCM OSS layer tries to clear the buffer with the silence data at
initialization (or reconfiguration) of a stream with the explicit call
of snd_pcm_format_set_silence() with runtime->dma_area. But this may
lead to a UAF because the accessed runtime->dma_area might be freed
concurrently, as it's performed outside the PCM ops.
For avoiding it, move the code into the PCM core and perform it inside
the buffer access lock, so that it won't be changed during the
operation.
scsi: target: iscsi: Fix timeout on deleted connection
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix timeout on deleted connection
NOPIN response timer may expire on a deleted connection and crash with
such logs:
Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d
BUG: Kernel NULL pointer dereference on read at 0x00000000
NIP strlcpy+0x8/0xb0
LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod]
Call Trace:
iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod]
call_timer_fn+0x58/0x1f0
run_timer_softirq+0x740/0x860
__do_softirq+0x16c
In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: protect vq->log_used with vq->mutex
The vhost-scsi completion path may access vq->log_base when vq->log_used is
already set to false.
vhost-thread QEMU-thread
vhost_scsi_complete_cmd_work()
-> vhost_add_used()
-> vhost_add_used_n()
if (unlikely(vq->log_used))
QEMU disables vq->log_used
via VHOST_SET_VRING_ADDR.
mutex_lock(&vq->mutex);
vq->log_used = false now!