wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifie
crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx
In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead.
fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info
In the Linux kernel, the following vulnerability has been resolved:
fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unpl
ibmasm: fix heap over-read in ibmasm_send_i2o_message()
In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix heap over-read in ibmasm_send_i2o_message()
The ibmasm_send_i2o_message() function uses get_dot_command_size() to
compute the byte count for memcpy_toio(), but this value is derived from
user-controlled fields in the dot_command_header (command_size: u8,
data_size: u16) and is never validated against the actual allocation size.
A root user can write a small buffer with inflated header fields, causing
memcpy_toio() to read up to ~65 KB past the end of the allocation into
adjacent kernel heap, which is then forwarded to the service processor
over MMIO.
Silently c
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path.
ceph: only d_add() negative dentries when they are unhashed
In the Linux kernel, the following vulnerability has been resolved:
ceph: only d_add() negative dentries when they are unhashed
Ceph can call d_add(dentry, NULL) on a negative dentry that is already
present in the primary dcache hash.
In the current VFS that is not safe. d_add() goes through __d_add()
to __d_rehash(), which unconditionally reinserts dentry->d_hash into
the hlist_bl bucket. If the dentry is already hashed, reinserting the
same node can corrupt the bucket, including creating a self-loop.
Once that happens, __d_lookup() can spin forever in the hlist_bl walk,
typically looping only on the d_name.hash mismatch check and
event
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix soft lockup in retry_aligned_read()
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overla
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
ALSA: ctxfi: Add fallback to default RSR for S/PDIF
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Add fallback to default RSR for S/PDIF
spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR
for the MSR calculation loop. However, pll_rate is only updated in
atc_pll_init() and not in hw_pll_init(), so it remains 0 after the
card init.
When spdif_passthru_playback_setup() skips atc_pll_init() for
32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin
indefinitely.
Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects
the hardware state, since hw_card_init() already configures the PLL
to the default RSR.
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
ipmi:ssif: Clean up kthread on errors
In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running.
libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()
In the Linux kernel, the following vulnerability has been resolved:
libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()
If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both
protocol and result, this is currently not treated as an error. In case
of ac->negotiating == true and ac->protocol > 0, this leads to setting
ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for
ac->protocol != protocol returns false, and init_protocol() is not
called. Subsequently, ac->ops->handle_reply() is called, which leads to
a null pointer dereference, because ac->ops is still NULL.
This patch changes the check for
Media · CVSS 5.5EPSS 0,13%Sin corrección publicada
dm mirror: fix integer overflow in create_dirty_log()
In the Linux kernel, the following vulnerability has been resolved:
dm mirror: fix integer overflow in create_dirty_log()
The argument count calculation in create_dirty_log() performs
`*args_used = 2 + param_count` before validating against argc. When a
user provides a param_count close to UINT_MAX via the device mapper
table string, this unsigned addition wraps around to a small value,
causing the subsequent `argc < *args_used` check to be bypassed.
The overflowed param_count is then passed as argc to dm_dirty_log_create(),
where it can cause out-of-bounds reads on the argv array.
Fix by comparing param_count against argc - 2 before perf
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
In the Linux kernel, the following vulnerability has been resolved:
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer()
Media · CVSS 5.5EPSS 0,14%Sin corrección publicada
thermal: core: Fix thermal zone governor cleanup issues
In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove
Media · CVSS 5.5EPSS 0,18%Sin corrección publicada
ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES
parse_uac2_sample_rate_range() caps the number of enumerated
rates at MAX_NR_RATES, but it only breaks out of the current
rate loop. A malformed UAC2 RANGE response with additional
triplets continues parsing the remaining triplets and repeatedly
prints "invalid uac2 rates" while probe still holds
register_mutex.
Stop the whole parse once the cap is reached and return the
number of rates collected so far.
KVM: SVM: Add missing save/restore handling of LBR MSRs
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Add missing save/restore handling of LBR MSRs
MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by
KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So
save/restore is completely broken.
Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to
LBR MSRs from userspace only (as they are read-only MSRs) if LBR
virtualization is enabled. Additionally, to correctly restore L1's LBRs
while L2 is running, make sure the LBRs are copied from the captured
VMCB01 save area in svm_copy_vmrun_state().
Note, for VMX, this also f
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
nouveau_gem_pushbuf_reloc_apply() validates each relocation with
if (r->reloc_bo_offset + 4 > nvbo->bo.base.size)
but reloc_bo_offset is __u32 (uapi/drm/nouveau_drm.h) and the integer
literal 4 promotes to unsigned int, so the addition is performed in 32
bits and wraps before the comparison against the size_t bo size.
Cast to u64 so the addition happens in 64-bit arithmetic.
[ Add Fixes: tag. - Danilo ]
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Handle probe errors properly
The probe procedure of setup_card() in caiaq driver doesn't treat the
error cases gracefully, e.g. the error from snd_card_register() calls
snd_card_free() but continues. This would lead to a UAF for the
further calls like snd_usb_caiaq_control_init(), as Berk suggested in
another patch in the link below.
However, the problem is not only that; in general, this function drops
the all error handlings (as it's a void function) although its caller
can propagate an error to snd_probe(), which eventually calls
snd_card_free() as a prope
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
ext2: reject inodes with zero i_nlink and valid mode in ext2_iget()
In the Linux kernel, the following vulnerability has been resolved:
ext2: reject inodes with zero i_nlink and valid mode in ext2_iget()
ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is
zero or i_dtime is set, treating them as deleted. However, the case of
i_nlink == 0 with a non-zero mode and zero dtime slips through. Since
ext2 has no orphan list, such a combination can only result from
filesystem corruption - a legitimate inode deletion always sets either
i_dtime or clears i_mode before freeing the inode.
A crafted image can exploit this gap to present such an inode to the
VFS, which then triggers WARN_ON inside drop_n
Media · CVSS 5.6EPSS 0,16%Sin corrección publicada
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
The security operations that verify the RESPONSE packets decrypt bits of it
in place - however, the sk_buff may be shared with a packet sniffer, which
would lead to the sniffer seeing an apparently corrupt packet (actually
decrypted).
Fix this by handing a copy of the packet off to the specific security
handler if the packet was cloned.
ibmasm: fix OOB reads in command_file_write due to missing size checks
In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix OOB reads in command_file_write due to missing size checks
The command_file_write() handler allocates a kernel buffer of exactly
count bytes and copies user data into it, but does not validate the
buffer against the dot command protocol before passing it to
get_dot_command_size() and get_dot_command_timeout().
Since both the allocation size (count) and the header fields (command_size,
data_size) are independently user-controlled, an attacker can cause
get_dot_command_size() to return a value exceeding the allocation,
triggering OOB reads in get_dot_command_time