PatchFirst · Vulnerabilidades recientes
Vulnerabilidades publicadas para linux-gcp-fips en los últimos 30 días: 396. Incluidas en el catálogo KEV: 0.
Vulnerabilidades: 6781
In the Linux kernel, the following vulnerability has been resolved: usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-esdhc: Fix refcount leak in esdhc_signal_voltage_switch of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer.
In the Linux kernel, the following vulnerability has been resolved: memstick/ms_block: Fix a memory leak 'erased_blocks_bitmap' is never freed. As it is allocated at the same time as 'used_blocks_bitmap', it is likely that it should be freed also at the same time. Add the corresponding bitmap_free() in msb_data_clear().
In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix potential memory leak in __qedr_alloc_mr() __qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr" is released while "mr->info.pbl_table" is not released, which will lead to a memory leak. We should release the "mr->info.pbl_table" with qedr_free_pbl() when error occurs to fix the memory leak.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: fix potential memory leak in setup_base_ctxt() setup_base_ctxt() allocates a memory chunk for uctxt->groups with hfi1_alloc_ctxt_rcv_groups(). When init_user_ctxt() fails, uctxt->groups is not released, which will lead to a memory leak. We should release the uctxt->groups with hfi1_free_ctxt_rcv_groups() when init_user_ctxt() fails.
In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix error unwind in rxe_create_qp() In the function rxe_create_qp(), rxe_qp_from_init() is called to initialize qp, internally things like the spin locks are not setup until rxe_qp_init_req(). If an error occures before this point then the unwind will call rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task() which will oops when trying to access the uninitialized spinlock. Move the spinlock initializations earlier before any failures.
In the Linux kernel, the following vulnerability has been resolved: jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted Following process will fail assertion 'jh->b_frozen_data == NULL' in jbd2_journal_dirty_metadata(): jbd2_journal_commit_transaction unlink(dir/a) jh->b_transaction = trans1 jh->b_jlist = BJ_Metadata journal->j_running_transaction = NULL trans1->t_state = T_COMMIT unlink(dir/b) handle->h_trans = trans2 do_get_write_access jh->b_modified = 0 jh->b_frozen_data = frozen_buffer jh->b_next_transaction = trans2 jbd2_journal_dirty_metad
In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Fix missing of_node_put() in error paths.
In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Fix refcount leak in some error paths.
In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Fix refcount leak in imx_rproc_addr_init of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not needed anymore. This function has two paths missing of_node_put().
In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix deadlock and link starvation in outgoing data path The current implementation queues up new control and user packets as needed and processes this queue down to the ldisc in the same code path. That means that the upper and the lower layer are hard coupled in the code. Due to this deadlocks can happen as seen below while transmitting data, especially during ldisc congestion. Furthermore, the data channels starve the control channel on high transmission load on the ldisc. Introduce an additional control channel data queue to prevent timeouts and link hangups
In the Linux kernel, the following vulnerability has been resolved: rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done.
In the Linux kernel, the following vulnerability has been resolved: video: fbdev: amba-clcd: Fix refcount leak bugs In clcdfb_of_init_display(), we should call of_node_put() for the references returned by of_graph_get_next_endpoint() and of_graph_get_remote_port_parent() which have increased the refcount. Besides, we should call of_node_put() both in fail path or when the references are not used anymore.
In the Linux kernel, the following vulnerability has been resolved: mfd: max77620: Fix refcount leak in max77620_initialise_fps of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address of_get_next_parent() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() in the error path to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader of_find_node_by_path() returns remote device nodepointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: Fix refcount leak in xive_get_max_prio of_find_node_by_path() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating that the cpuset will just use the effective CPUs of its parent. So cpuset_can_attach() can call task_can_attach() with an empty mask. This can lead to cpumask_any_and() returns nr_cpu_ids causing the call to dl_bw_of() to crash due to percpu value access of an out of bound CPU value. For example: [80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0 : [80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0 : [8
Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.