p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-aws-fips · Página 185

Vulnerabilidades publicadas para linux-aws-fips en los últimos 30 días: 603. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 7983

  1. CVE-2026-43133

    Alta · CVSS 7.9EPSS 0,13%Sin corrección publicada

    KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation

    In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

    Publicación Actualización
  2. CVE-2026-43132

    Media · CVSS 5.5EPSS 0,13%Sin corrección publicada

    dm-verity: correctly handle dm_bufio_client_create() failure

    In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this.

    Publicación Actualización
  3. CVE-2026-43126

    Alta · CVSS 7.8EPSS 0,16%Sin corrección publicada

    ALSA: mixer: oss: Add card disconnect checkpoints

    In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly.

    Publicación Actualización
  4. CVE-2026-43124

    Media · CVSS 5.5EPSS 0,13%Sin corrección publicada

    pstore: ram_core: fix incorrect success return when vmap() fails

    In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures.

    Publicación Actualización
  5. CVE-2026-43123

    Media · CVSS 5.7EPSS 0,13%Sin corrección publicada

    fbcon: check return value of con2fb_acquire_newinfo()

    In the Linux kernel, the following vulnerability has been resolved: fbcon: check return value of con2fb_acquire_newinfo() If fbcon_open() fails when called from con2fb_acquire_newinfo() then info->fbcon_par pointer remains NULL which is later dereferenced. Add check for return value of the function con2fb_acquire_newinfo() to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE.

    Publicación Actualización
  6. CVE-2025-71274

    Alta · CVSS 7.8EPSS 0,1%Sin corrección publicada

    rpmsg: core: fix race in driver_override_show() and use core helper

    In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since t

    Publicación Actualización
  7. CVE-2025-71273

    Media · CVSS 5.5EPSS 0,16%Sin corrección publicada

    wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()

    In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

    Publicación Actualización
  8. CVE-2025-71272

    Media · CVSS 5.5EPSS 0,16%Sin corrección publicada

    most: core: fix resource leak in most_register_interface error paths

    In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev()

    Publicación Actualización
  9. CVE-2026-43119

    Media · CVSS 5.5EPSS 0,11%Sin corrección publicada

    Bluetooth: hci_sync: annotate data-races around hdev->req_status

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: annotate data-races around hdev->req_status __hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND; However, several other functions read or write hdev->req_status without holding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort path Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while hci_se

    Publicación Actualización
  10. CVE-2026-43118

    Media · CVSS 5.5EPSS 0,16%Sin corrección publicada

    btrfs: fix zero size inode with non-zero size after log replay

    In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mo

    Publicación Actualización
  11. CVE-2026-43117

    Crítica · CVSS 9.1EPSS 0,46%Sin corrección publicada

    btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()

    In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb.

    Publicación Actualización
  12. CVE-2026-43116

    Alta · CVSS 7.8EPSS 0,1%Sin corrección publicada

    netfilter: ctnetlink: ensure safe access to master conntrack

    In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch g

    Publicación Actualización
  13. CVE-2026-43115

    Media · CVSS 5.6EPSS 0,15%Sin corrección publicada

    srcu: Use irq_work to start GP in tiny SRCU

    In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup be

    Publicación Actualización
  14. CVE-2026-43114

    Crítica · CVSS 9.4EPSS 0,37%Sin corrección publicada

    netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b

    Publicación Actualización
  15. CVE-2026-43113

    Alta · CVSS 8.8EPSS 0,24%Sin corrección publicada

    wifi: wl1251: validate packet IDs before indexing tx_frames

    In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_tx_packet_cb() uses the firmware completion ID directly to index the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the completion block, and the callback does not currently verify that it fits the array before dereferencing it. Reject completion IDs that fall outside wl->tx_frames[] and keep the existing NULL check in the same guard. This keeps the fix local to the trust boundary and avoids touching the rest of the completion flow.

    Publicación Actualización
  16. CVE-2026-43112

    Alta · CVSS 8.8EPSS 0,35%Sin corrección publicada

    fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath

    In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs.

    Publicación Actualización
  17. CVE-2026-43111

    Alta · CVSS 7.8EPSS 0,1%Sin corrección publicada

    HID: roccat: fix use-after-free in roccat_report_event

    In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.

    Publicación Actualización
  18. CVE-2026-43110

    Alta · CVSS 8.8EPSS 0,27%Sin corrección publicada

    wifi: brcmfmac: validate bsscfg indices in IF events

    In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix]

    Publicación Actualización
  19. CVE-2026-43107

    Media · CVSS 6.8EPSS 0,16%Sin corrección publicada

    xfrm: account XFRMA_IF_ID in aevent size calculation

    In the Linux kernel, the following vulnerability has been resolved: xfrm: account XFRMA_IF_ID in aevent size calculation xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is set. xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0) in xfrm_get_ae(), turning a malformed netlink interaction into a kernel panic. Account XFRMA_IF_ID in the size calculation unconditionally and replace the BUG_ON with normal error unwinding.

    Publicación Actualización
  20. CVE-2026-43105

    Media · CVSS 5.5EPSS 0,11%Sin corrección publicada

    drm/vc4: Fix memory leak of BO array in hang state

    In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix memory leak of BO array in hang state The hang state's BO array is allocated separately with kzalloc() in vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the missing kfree() for the BO array before freeing the hang state struct.

    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →