p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-aws-fips · Página 89

Vulnerabilidades publicadas para linux-aws-fips en los últimos 30 días: 576. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 7965

  1. CVE-2026-80628

    Alta · CVSS 7.8EPSS 0,18%Sin corrección publicada

    ALSA: seq: oss: Serialize readq reset state with q->lock

    In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Serialize readq reset state with q->lock snd_seq_oss_readq_clear() resets qlen, head, and tail without q->lock even though the normal reader and producer paths serialize the same ring state under that spinlock. A reset can therefore race snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave stale records in the queue, drop freshly queued ones, or report the wrong readiness after wakeup. KCSAN reports a data race between snd_seq_oss_readq_clear() and snd_seq_oss_readq_free(). Take q->lock while clearing the ring and resetting input_time. Factor

    Publicación Actualización
  2. CVE-2026-80627

    Sin evaluarEPSS 0,22%Sin corrección publicada

    MIPS: mm: Fix out-of-bounds write in maar_res_walk()

    In the Linux kernel, the following vulnerability has been resolved: MIPS: mm: Fix out-of-bounds write in maar_res_walk() maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking th

    Publicación Actualización
  3. CVE-2026-80626

    Media · CVSS 5.7EPSS 0,22%Sin corrección publicada

    powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del

    In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with g

    Publicación Actualización
  4. CVE-2026-80623

    Baja · CVSS 2EPSS 0,21%Sin corrección publicada

    coresight: ete: Always save state on power down

    In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the globa

    Publicación Actualización
  5. CVE-2026-80622

    Alta · CVSS 7.8EPSS 0,17%Sin corrección publicada

    char: tlclk: fix use-after-free in tlclk_cleanup()

    In the Linux kernel, the following vulnerability has been resolved: char: tlclk: fix use-after-free in tlclk_cleanup() This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases,

    Publicación Actualización
  6. CVE-2026-80619

    Alta · CVSS 7.8EPSS 0,18%Sin corrección publicada

    apparmor: fix potential UAF in aa_replace_profiles

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix potential UAF in aa_replace_profiles The function aa_replace_profiles was accessing udata->size after calling aa_put_loaddata(udata), causing a potential UAF. Fixed this by saving the size to a local variable before dropping the reference.

    Publicación Actualización
  7. CVE-2026-80616

    Baja · CVSS 1.8EPSS 0,23%Sin corrección publicada

    ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()

    In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

    Publicación Actualización
  8. CVE-2026-80613

    Alta · CVSS 7.8EPSS 0,13%Sin corrección publicada

    veth: fix NAPI leak in XDP enable error path

    In the Linux kernel, the following vulnerability has been resolved: veth: fix NAPI leak in XDP enable error path During XDP enablement in veth, if xdp_rxq_info_reg() or xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes. However, the rollback loop: for (i--; i >= start; i--) { decrements the loop index 'i' before the first iteration. This correctly skips unregistering the rxq for the failed index 'i' (as registration failed or was already cleaned up), but it also erroneously skips calling netif_napi_deli() for rq[i].xdp_napi. Since netif_napi_add() was already called for index 'i', this leaves a dangling napi_struct i

    Publicación Actualización
  9. CVE-2026-80611

    Sin evaluarEPSS 0,21%Sin corrección publicada

    ACPI: processor_idle: Mark LPI enter functions as __cpuidle

    In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting

    Publicación Actualización
  10. CVE-2026-80605

    Sin evaluarEPSS 0,22%Sin corrección publicada

    HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()

    In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait() In picolcd_send_and_wait(), an integer overflow of the signed loop counter 'k' can theoretically lead to a NULL pointer dereference of 'raw_data'. If the loop executes more than INT_MAX times, 'k' becomes negative, making the condition 'k < size' true even when 'size' is 0. Change the type of 'k' to 'unsigned int' to prevent the overflow and eliminate the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. [[email protected]: extended hash

    Publicación Actualización
  11. CVE-2026-80603

    Crítica · CVSS 9.1EPSS 0,6%Sin corrección publicada

    netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read parse_dcc() treats data_end as an inclusive end pointer, but its only caller passes data_limit = ib_ptr + datalen, which points one past the last valid byte. The newline search loop iterates while tmp <= data_end, so when no newline is present, *tmp is read at tmp == data_end, one byte beyond the region filled by skb_header_pointer(). irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte is uninitialized or stale; if it cont

    Publicación Actualización
  12. CVE-2026-80601

    Alta · CVSS 8.8EPSS 0,4%Sin corrección publicada

    batman-adv: gw: acquire ethernet header only after skb realloc

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: gw: acquire ethernet header only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.

    Publicación Actualización
  13. CVE-2026-80600

    Crítica · CVSS 9.8EPSS 0,73%Sin corrección publicada

    batman-adv: dat: acquire ARP hw source only after skb realloc

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.

    Publicación Actualización
  14. CVE-2026-80599

    Alta · CVSS 8.1EPSS 0,42%Sin corrección publicada

    batman-adv: dat: ensure accessible eth_hdr proto field

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: ensure accessible eth_hdr proto field When batadv_get_vid() accesses the proto field of the ethernet header, it is not checking if the data itself is accessible. The caller is responsible for it. But in contrast to other call sites, batadv_dat_get_vid() and its caller didn't make sure this is true. This could have caused an out-of-bounds access.

    Publicación Actualización
  15. CVE-2026-80598

    Alta · CVSS 7.8EPSS 0,18%Sin corrección publicada

    ntfs3: fix out-of-bounds read in decompress_lznt

    In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in decompress_lznt decompress_lznt() does not validate array index bounds before accessing the decompression table. A corrupted NTFS3 image with invalid compressed data can trigger an out-of-bounds read. Add index bounds checking to prevent the OOB access.

    Publicación Actualización
  16. CVE-2026-80597

    Sin evaluarEPSS 0,22%Sin corrección publicada

    mtd: maps: vmu-flash: fix NULL pointer dereference in initialization

    In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix NULL pointer dereference in initialization The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference.

    Publicación Actualización
  17. CVE-2026-80595

    Sin evaluarEPSS 0,22%Sin corrección publicada

    Input: ims-pcu - add response length checks

    In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - add response length checks The driver processes response data from device buffers without verifying that the device actually sent enough data. This can lead to out-of-bounds reads or processing stale data. Add checks for the expected response length before accessing the buffers.

    Publicación Actualización
  18. CVE-2026-80594

    Sin evaluarEPSS 0,22%Sin corrección publicada

    Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing

    In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing.

    Publicación Actualización
  19. CVE-2026-80593

    Alta · CVSS 8.4EPSS 0,2%Sin corrección publicada

    hwmon: (asus_atk0110) Check package count before accessing element

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_atk0110) Check package count before accessing element atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package

    Publicación Actualización
  20. CVE-2026-80591

    Alta · CVSS 7.8EPSS 0,18%Sin corrección publicada

    f2fs: fix listxattr handling of corrupted xattr entries

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix listxattr handling of corrupted xattr entries Validate the xattr entry before reading its fields in f2fs_listxattr(). Return -EFSCORRUPTED when the entry is outside the valid xattr storage area instead of returning a successful partial result.

    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →