ocfs2/dlm: validate qr_numregions in dlm_match_regions()
In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: validate qr_numregions in dlm_match_regions()
Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".
In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION
network message is used to drive loops over the qr_regions buffer without
sufficient validation. This series fixes two issues:
- Patch 1 adds a bounds check to reject messages where qr_numregions
exceeds O2NM_MAX_REGIONS. The o2net layer only validates message
byte length; it does not constrain field values, so a crafted message
can set qr_numregions up to 255 and trigger out-
ocfs2: fix listxattr handling when the buffer is full
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix listxattr handling when the buffer is full
[BUG]
If an OCFS2 inode has both inline and block-based xattrs, listxattr()
can return a size larger than the caller's buffer when the inline names
consume that buffer exactly.
kernel BUG at mm/usercopy.c:102!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102
Call Trace:
__check_heap_object+0xe3/0x120 mm/slub.c:8243
check_heap_object mm/usercopy.c:196 [inline]
__check_object_size mm/usercopy.c:250 [inline]
__check_object_size+0x5c5/0x780 mm/usercopy.c:215
check_obj
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate bg_bits during freefrag scan
[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free
Media · CVSS 6.7EPSS 0,16%Sin corrección publicada
ocfs2: validate group add input before caching
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate group add input before caching
[BUG]
OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in
ocfs2_set_new_buffer_uptodate():
kernel BUG at fs/ocfs2/uptodate.c:509!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509
Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df
Call Trace:
ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507
ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x1
In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix deadlock in hid_post_reset()
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them.
bpf, arm64: Fix off-by-one in check_imm signed range check
In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fix off-by-one in check_imm signed range check
check_imm(bits, imm) is used in the arm64 BPF JIT to verify that
a branch displacement (in arm64 instruction units) fits into the
signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding
before it is handed to the encoder. The macro currently tests for
(imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits
values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A
signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check
admits one extra bit of range on each side.
In particular, for c
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix af_unix iter deadlock
bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast
path and the iter prog attempts to update a sockmap. Which ends up spinning
at sock_map_update_elem()'s bh_lock_sock():
WARNING: possible recursive locking detected
test_progs/1393 is trying to acquire lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0
but task is already holding lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0
other info that might help us debug this:
Possible unsafe lo
Media · CVSS 5.6EPSS 0,13%Sin corrección publicada
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state,
TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`).
sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that
socket is properly set up, which would include having a defined peer. IOW,
there's a window when unix_stream_bpf_update_proto() can be called on
socket which still has unix_peer(sk) == NULL.
CPU0 bpf CPU1 connect
-------- ------------
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Take state lock for af_unix iter
When a BPF iterator program updates a sockmap, there is a race condition in
unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]
during a state transition TCP_ESTABLISHED -> TCP_CLOSE.
CPU0 bpf CPU1 close
-------- ----------
// unix_stream_bpf_update_proto()
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
// unix_release_sock()
skpair = unix_peer(s
In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free on cdev close
This addresses a use-after-free bug when a raw bundle is disconnected
but its chardev is still opened by an application. When the application
releases the cdev, it causes the following panic when init on free is
enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130
...
Call Trace:
<TASK>
cdev_put+0x18/0x30
__fput+0x255/0x2a0
__x64_sys_close+0x3d/0x80
greybus: raw: fix use-after-free if write is called after disconnect
In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136
Media · CVSS 5.5EPSS 0,16%Sin corrección publicada
fs/ntfs3: terminate the cached volume label after UTF-8 conversion
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: terminate the cached volume label after UTF-8 conversion
ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()
and stores the result in sbi->volume.label. The converted label is later
exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only
returns the number of bytes written and does not add a trailing NUL.
If the converted label fills the entire fixed buffer,
ntfs3_label_show() can read past the end of sbi->volume.label while
looking for a terminator.
Terminate the cached label explicitly after a successful conversion and
clamp
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
populate_enum_data() aggregates firmware-provided value-modifier
and possible-value strings into fixed 512-byte struct members.
The current code bounds each individual source string but then
appends every string and separator with raw strcat() and no
remaining-space check.
Switch the aggregation loops to a bounded append helper and
reject enumeration packages whose combined strings do not fit
in the destination buffers.
[ij: add include]
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
scsi: target: core: Fix integer overflow in UNMAP bounds check
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix integer overflow in UNMAP bounds check
sbc_execute_unmap() checks LBA + range does not exceed the device capacity,
but does not guard against LBA + range wrapping around on 64-bit overflow.
Add an overflow check matching the pattern already used for WRITE_SAME in
the same file.
Media · CVSS 5.8EPSS 0,16%Sin corrección publicada
f2fs: avoid reading already updated pages during GC
In the Linux kernel, the following vulnerability has been resolved:
f2fs: avoid reading already updated pages during GC
We found the following issue during fuzz testing:
page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9
memcg:f8ffff800e269c00
aops:f2fs_meta_aops ino:2
flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a)
raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618
raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00
page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio))
page_owner tracks the page as allocated
post_alloc_
Media · CVSS 5.5EPSS 0,16%Sin corrección publicada
f2fs: fix data loss caused by incorrect use of nat_entry flag
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
erofs: unify lcn as u64 for 32-bit platforms
In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com
Media · CVSS 5.5EPSS 0,14%Sin corrección publicada
nexthop: fix IPv6 route referencing IPv4 nexthop
In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calc