drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nl
net: xfrm: reject unrepresentable espintcp transport headers
In the Linux kernel, the following vulnerability has been resolved:
net: xfrm: reject unrepresentable espintcp transport headers
ESP-in-TCP can hand xfrm packets whose transport header offset no longer
fits after the stream parser trims the TCP envelope. The plain transport
header reset truncates that offset and triggers the skb warning path.
Use the careful transport-header helper and drop the skb through the
existing XFRM error path when the offset cannot be represented.
dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn()
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn()
If devm_kcalloc() for rx_chn->flows fails in a channel request function,
the error path calls k3_udma_glue_release_rx_chn(), which dereferences
the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow().
Skip the flow release loop in k3_udma_glue_release_rx_chn() when
rx_chn->flows is not allocated.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
selinux: always fill AVC decision in avc_has_perm_noaudit()
In the Linux kernel, the following vulnerability has been resolved:
selinux: always fill AVC decision in avc_has_perm_noaudit()
avc_has_perm_noaudit() is documented to return a copy of the access
decision in @avd, but its early return for an empty requested permission
set leaves the buffer untouched. All callers pass an uninitialized
stack variable and afterwards feed it to avc_audit(), and the inode hook
even stores it in the per-task decision cache.
Fill in a deny-all, audit-all decision, similar to avd_init(), so every
caller receives a defined value at no cost on the hot path.
In the Linux kernel, the following vulnerability has been resolved:
watchdog: rtd119x: Avoid division by zero
clk_get_rate() could return 0. Avoid a division by zero panic.
In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix heap OOB write on key removal
When a key is removed (data == NULL), rsi_hal_load_key() runs:
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ);
set_key is a struct rsi_set_key *, so the subscript is scaled by
sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is
skb->data + 2560, and the memset writes 144 zero bytes starting
2.4KB past the end of the 160-byte skb data buffer, corrupting
unrelated heap objects. The intended byte offset would have been
(u8 *)set_key + FRAME_DESC_SZ.
The write fires on every DISABLE_KEY callback, so
wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver
ieee80211_set_bitrate_mask() checks if the interface is running via
ieee80211_sdata_running(), but it does not check if the interface is
still present in the driver.
When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the
call reaches drv_set_bitrate_mask() in driver-ops.h which hits
wlan1: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask
Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows
wext_ioctl_dis
drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create()
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create()
Smatch complains that returning a NULL here will lead to a NULL pointer
dereference in drm_mode_addfb2(). Return an error pointer instead.
s390/boot: Avoid IPL parameter append past command line
In the Linux kernel, the following vulnerability has been resolved:
s390/boot: Avoid IPL parameter append past command line
A command line may occupy all but the terminating byte of
COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size
to the IPL parameter conversion helpers and points the destination one
byte past early_command_line. The helpers subtract one from the unsigned
size and write the converted parameter outside the command line buffer.
Convert the IPL parameter in the command line parsing buffer first. A
parameter beginning with '=' can then replace the existing command line
regardless of its length, while
net: iptunnel: fix stale transport header during tunnel decapsulation
In the Linux kernel, the following vulnerability has been resolved:
net: iptunnel: fix stale transport header during tunnel decapsulation
Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale
transport_header offset after tunnel decapsulation.
BUG: unable to handle page fault for address: ffffed102091a42e
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__asan_load2
<IRQ>
qdisc_pkt_len_segs_init (net/core/dev.c:4145)
__dev_queue_x
s390/ipl: Fix NULL deref in kdump without re-IPL parm block
In the Linux kernel, the following vulnerability has been resolved:
s390/ipl: Fix NULL deref in kdump without re-IPL parm block
Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might
not provide an IPL parameter block. In this case, reipl_type_init()
selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL.
kdump passes the re-IPL parameter block to the dump kernel through
os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl
block checksum calculation"), the os_info entry was added only for
IPL types which initialized reipl_block_actual. That commit moved the
os_info update to machine_crash_shutdown(), maki
s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block
In the Linux kernel, the following vulnerability has been resolved:
s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block
Unlike kdump, which passes the re-IPL parameter block through os_info,
the stand-alone dump passes it through the IPL parm block address and
checksum in lowcore.
Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not
provide an IPL parameter block. In this case reipl_type_init() selects
IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless,
dump_reipl_run() unconditionally dereferences it when preparing the
lowcore fields. This may happen to work by chance when address zero
conta
locking/lockdep: Invalidate stale class_cache entries for zapped classes
In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Invalidate stale class_cache entries for zapped classes
syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in
hlock_class() due to an invalid class_idx:
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline]
RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203
Call Trace:
<IRQ>
lock_acquire+0x106/0x3
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait
in unix_stream_read_generic() if recv() is blocking and the last
skb in the queue is MSG_OOB skb.
In such a situation, TCP returns 0 immediately regardless of
blocking or non-blocking.
Let's follow the behaviour.
net: ipv4: Fix UDP length overflow with PMTU discover and big MTU
In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a
possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to
IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an
unusually large MTU.
Steps to reproduce:
1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will
be set to that MTU in ip_setup_cork.
2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be
set to device MTU (cork->fragsize) in
drm/amdgpu: skip gfx switch_power_profile during GPU reset
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip gfx switch_power_profile during GPU reset
During resume from GPU reset, the gfx idle work may invoke switch_power_profile
before the reset completes. This causes the following assert error because the
register access occurs without first releasing the GPU reset semaphore:
[ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0
[ 1576.768940] Call Trace:
[ 1576.768944] <TASK>
[ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu]
[ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu]
[ 1576.769437] smu_cmn_send_smc_msg_with_param
s390/crypto: Fix skcipher_walk return code handling in aes_s390
In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix skcipher_walk return code handling in aes_s390
The return codes from skcipher_walk_virt() were not properly checked
before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt().
If skcipher_walk_virt() fails, the walk structure may be in an undefined
state, and attempting to process data could lead to incorrect behavior
or accessing uninitialized memory.
Add proper return code checking to ensure correct handling of the walk
initialization and walk advance and eventually return to the caller
with that return code.
Media · CVSS 5.7EPSS 0,21%Sin corrección publicada
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
For QLAFX00 the request ring is ioremapped device I/O memory
(ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest
of the FX00 path accesses it through memcpy_toio() and the wrt_reg_*
helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a
plain memset(). On architectures such as ARM64 a regular memset() may
emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are
invalid on Device memory, leading to a synchronous external abort.
Use memset_io() to clear the slot
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
An LWT_SEG6LOCAL program can invalidate its cached SRH with
bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter
may reallocate skb->head, leaving the per-CPU SRH pointer dangling.
Post-program SRH validation then writes through that pointer.
Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier
rejects this unsafe helper combination. Other LWT program types continue
to expose the helper through lwt_out_func_proto().
veth: manage XDP program pointers during channel resize
In the Linux kernel, the following vulnerability has been resolved:
veth: manage XDP program pointers during channel resize
veth_set_channels() tears down XDP resources for removed RX queues
without clearing rq->xdp_prog. If the program is then detached or
replaced, those queues keep the old pointer after bpf_prog_put().
A later channel increase can re-enable NAPI and run the freed program.
BUG: unable to handle page fault for address: ffffc90000256048
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: veth_xdp_rcv_skb (include/linux/filter.h:779
include/net/xdp.h:696 drivers/net/veth.c:820)
Call Trace:
veth_xd