media: saa7164: fix cleanup on resource allocation failure
In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requ
In the Linux kernel, the following vulnerability has been resolved:
media: tda18250: fix possible integer overflow
Integer overflow may occur, when variable exp equals to zero. Result
of shift 1 << (exp - 1) may then leads to undefined behavior.
media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link
In v4l2_fwnode_parse_link(), the remote endpoint fwnode reference is
acquired using fwnode_graph_get_remote_endpoint(). This reference is
properly released in the error paths, but it is leaked on the success
path.
Add the missing fwnode_handle_put() before returning 0 to prevent the
reference leak.
[Sakari Ailus: Fix subject prefix and coding style a little.]
media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure
In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure
kthread_run() returns an ERR_PTR on failure, not NULL.
When start_streaming() fails, data->kthread_vid_cap is left holding
this error pointer instead of being cleared.
This causes two subsequent bugs:
1. A future call to start_streaming() sees a non-NULL kthread_vid_cap
and returns 0 (success) immediately, without actually starting the
capture thread.
2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which
is false for an error pointer, and proceeds to call kthread_stop()
media: zoran: Avoid freeing a registered video_device twice
In the Linux kernel, the following vulnerability has been resolved:
media: zoran: Avoid freeing a registered video_device twice
zoran_init_video_device() installs zoran_vdev_release() as the
video_device release callback through zoran_template. After
video_register_device() succeeds, video_unregister_device() drops the
registered video_device reference and the V4L2 core eventually invokes
that release callback, which kfree()s the video_device.
zoran_exit_video_devices() called video_unregister_device() and then
kfree(zr->video_dev), so device teardown could free the same
video_device twice.
Remove the direct kfree() and clear the cached p
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes f
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap bu
scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check
qla_chk_edif_rx_sa_delete_pending() obtains the SCSI command via
GET_CMD_SP(sp) and immediately dereferences cmd->sc_data_direction.
That command pointer can be NULL: the firmware may post a status
completion for a command that has already been returned or aborted. The
caller qla2x00_status_entry() acknowledges this on the very same status
path, re-fetching GET_CMD_SP(sp) and bailing out with the "Command
already returned" message when it is NULL -- but that check runs only
after qla_chk_edif_rx_sa_delete_pe
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the format 1 path, the virtual port is located on ha->vp_list while
holding vport_slock, but the lock is dropped before vp is used:
qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/
REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that
window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport
down and free it, leading to a use-after-free.
Take a vport reference (vref_count) under vport_slock when the matching
vp is found, and drop it after the last u
scsi: qla2xxx: Initialize NVMe abort_work once at submission
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Initialize NVMe abort_work once at submission
qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on
priv->abort_work immediately before schedule_work(). INIT_WORK()
reinitializes the work_struct, resetting its list head and clearing the
pending bit. If an abort is issued more than once for the same command
(for example, concurrent transport teardown and a timeout-driven abort),
the second INIT_WORK() reinitializes a work item that is already queued,
which can corrupt the workqueue list and lead to crashes or a looping
worker.
Initialize priv->abort
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response
buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full
sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound
sg_copy_to_buffer() only fills as many bytes as the user request payload
provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The
options and unused[] fields are therefore copied out uninitialized,
leaking kernel heap contents to user space.
Allocate with kzalloc_obj(), matching qla2x00_do_dp
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
qla2x00_update_fru_versions() copies the user-supplied BSG request into
a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates
list->count times over the qla_image_version array embedded in that
buffer, advancing the image pointer each iteration. count is taken
directly from user input with no upper bound, while only (DMA_POOL_SIZE
- sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries
actually fit. A larger count walks the image pointer off the end of the
stack buffer, reading ad
scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation
ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and
ha->max_qpairs are u8. Deriving the queue count as
"ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board
(or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X
vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X
count of 1 zeroes it as well, and in target mode the subsequent
"ha->max_req_queues--" then underflows 0 to 255.
When the count is 0, qla2x00_alloc_queues() calls
kzalloc_objs(st
scsi: qla2xxx: Serialize flash version read in reset handler
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize flash version read in reset handler
The "update cache versions without reset" sysfs reset operation (0x20261)
calls get_flash_version(), which reads hardware flash registers, without
holding ha->optrom_mutex. The VPD update path serializes the same call
under optrom_mutex, so this reset path can interleave its flash register
accesses with a concurrent VPD or optrom flash operation and corrupt the
reads.
Hold ha->optrom_mutex across the get_flash_version() call to match the
VPD update path.
scsi: qla2xxx: Fix cs84xx use-after-free on host teardown
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix cs84xx use-after-free on host teardown
qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via
__qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran
before scsi_remove_host(), which is what removes the 84xx_fw_version host
sysfs attribute. A concurrent read of that attribute in the window between
the two calls executes qla24xx_84xx_fw_version_show(), which dereferences
the freed ha->cs84xx, resulting in a use-after-free.
Move qla84xx_put_chip() to after scsi_remove_host() in both
qla2x00_remove_one() and qla2x00_
scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()
The mbx_cmd_t is allocated on the stack but left uninitialized.
qla2x00_mailbox_command() has several early-return paths (PCI permanent
failure, device failed, EEH busy, ISP abort pending, mailbox access
timeout, purge mbox) that return without writing the input mailbox
registers back into mcp->mb[]. qla2x00_get_firmware_state() then
unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's
states[] array regardless of the return value.
On such a failure the copied values are uninitialized kernel
scsi: qla2xxx: Don't query firmware state while chip is down
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Don't query firmware state while chip is down
qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps
to the out: label when the chip is down or EEH is busy. The out: block
then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS,
defeating the chip-down/EEH-busy guards and issuing a mailbox command
(outside optrom_mutex) during ISP reset or PCI error recovery, which can
hang the adapter. It also turned a normal in-lock mailbox failure into a
second unsynchronized mailbox attempt.
Make the out: fallback only mark the firmware
scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path
qla2x00_status_entry() filters out non-TYPE_SRB entries and the
SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a
SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first
thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the
subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd.
The srb u union overlays the SCSI command pointer with other command
layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected
STATUS_TYPE IOCB for a non-SCSI handle, sp-
scsi: qla2xxx: Quiesce response IRQ before freeing request queue
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Quiesce response IRQ before freeing request queue
qla2xxx_delete_qpair() deletes the request queue before the response
queue. qla25xx_delete_req_que() frees the request queue memory
(kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is
only released later, in qla25xx_free_rsp_que(). In that window the
response interrupt can still fire, qla2xxx_msix_rsp_q() queues
qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue()
dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the
status path), a use-after-free.
The cancel
scsi: qla2xxx: Avoid double completion in async IOCB timeout
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid double completion in async IOCB timeout
qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When
qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the
SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then
call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking
whether the SRB was actually found and removed.
If the response ISR completes the same handle first, it removes the SRB
under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The
submitter qla24xx_control_vp() wakes from wait_