Vulnerabilidades de linux-azure-fips · Página 112

power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()

In the Linux kernel, the following vulnerability has been resolved: power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed() In `probe()`, `request_irq()` is called before allocating/registering a `power_supply` handle. If an interrupt is fired between the call to `request_irq()` and `power_supply_register()`, the `power_supply` handle will be used uninitialized in `power_supply_changed()` in `wm97xx_bat_update()` (triggered from the interrupt handler). This will lead to a `NULL` pointer dereference since Fix this racy `NULL` pointer dereference by making sure the IRQ is requested _after_ the registration of the `power

pinctrl: single: fix refcount leak in pcs_add_gpio_func()

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix refcount leak in pcs_add_gpio_func() of_parse_phandle_with_args() returns a device_node pointer with refcount incremented in gpiospec.np. The loop iterates through all phandles but never releases the reference, causing a refcount leak on each iteration. Add of_node_put() calls to release the reference after extracting the needed arguments and on the error path when devm_kzalloc() fails. This bug was detected by our static analysis tool and verified by my code review.

power: supply: act8945a: Fix use-after-free in power_supply_changed()

In the Linux kernel, the following vulnerability has been resolved: power: supply: act8945a: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler h

serial: caif: fix use-after-free in caif_serial ldisc_close()

In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after-free in caif_serial ldisc_close() There is a use-after-free bug in caif_serial where handle_tx() may access ser->tty after the tty has been freed. The race condition occurs between ldisc_close() and packet transmission: CPU 0 (close) CPU 1 (xmit) ------------- ------------ ldisc_close() tty_kref_put(ser->tty) [tty may be freed here] <-- race window --> caif_xmit() handle_tx()

ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1

In the Linux kernel, the following vulnerability has been resolved: ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1 When allocating initialized blocks from a large unwritten extent, or when splitting an unwritten extent during end I/O and converting it to initialized, there is currently a potential issue of stale data if the extent needs to be split in the middle. 0 A B N [UUUUUUUUUUUU] U: unwritten extent [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_ENTIRE_VALID1 and E

scsi: csiostor: Fix dereference of null pointer rn

In the Linux kernel, the following vulnerability has been resolved: scsi: csiostor: Fix dereference of null pointer rn The error exit path when rn is NULL ends up deferencing the null pointer rn via the use of the macro CSIO_INC_STATS. Fix this by adding a new error return path label after the use of the macro to avoid the deference.

RDMA/rxe: Fix double free in rxe_srq_from_init

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe

ipvs: skip ipv6 extension headers for csum checks

In the Linux kernel, the following vulnerability has been resolved: ipvs: skip ipv6 extension headers for csum checks Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem.

smack: /smack/doi: accept previously used values

In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/a

netfilter: arp_tables: fix IEEE1394 ARP payload parsing

In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target

slip: bound decode() reads against the compressed packet length

In the Linux kernel, the following vulnerability has been resolved: slip: bound decode() reads against the compressed packet length slhc_uncompress() parses a VJ-compressed TCP header by advancing a pointer through the packet via decode() and pull16(). Neither helper bounds-checks against isize, and decode() masks its return with & 0xffff so it can never return the -1 that callers test for -- those error paths are dead code. A short compressed frame whose change byte requests optional fields lets decode() read past the end of the packet. The over-read bytes are folded into the cached cstate and reflected into subsequent reconstructed packe

slip: reject VJ receive packets on instances with no rstate array

In the Linux kernel, the following vulnerability has been resolved: slip: reject VJ receive packets on instances with no rstate array slhc_init() accepts rslots == 0 as a valid configuration, with the documented meaning of 'no receive compression'. In that case the allocation loop in slhc_init() is skipped, so comp->rstate stays NULL and comp->rslot_limit stays 0 (from the kzalloc of struct slcompress). The receive helpers do not defend against that configuration. slhc_uncompress() dereferences comp->rstate[x] when the VJ header carries an explicit connection ID, and slhc_remember() later assigns cs = &comp->rstate[...] after only comparin

netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO nf_osf_match_one() computes ctx->window % f->wss.val in the OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a subsequent matching TCP SYN divides by zero and panics the kernel. Reject the bogus fingerprint in nfnl_osf_add_callback() above the per-option for-loop. f->wss is per-fingerprint, not per-option, so the check must run regardless of f->opt_num (including 0). Also reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that a

openvswitch: cap upcall PID array size and pre-size vport replies

In the Linux kernel, the following vulnerability has been resolved: openvswitch: cap upcall PID array size and pre-size vport replies The vport netlink reply helpers allocate a fixed-size skb with nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID array via ovs_vport_get_upcall_portids(). Since ovs_vport_set_upcall_portids() accepts any non-zero multiple of sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID array large enough to overflow the reply buffer, causing nla_put() to fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with unprivileged user namespaces enabled (e.g., Ubuntu default),

Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_get_sndtimeo_cb()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_get_sndtimeo_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb().

Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_new_connection_cb()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_new_connection_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb().

Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb() Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb().

net: skbuff: propagate shared-frag marker through frag-transfer helpers

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a referen

• Actualiza a 4.15.0-2112.118

rtmutex: Use waiter::task instead of current in remove_waiter()

In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_

• Actualiza a 4.15.0-2113.119

net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked When red qdisc has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (red in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(red) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet.