Vulnerabilidades de linux-fips · Página 168

mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.

wifi: cfg80211: reject auth/assoc to AP with our address

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject auth/assoc to AP with our address If the AP uses our own address as its MLD address or BSSID, then clearly something's wrong. Reject such connections so we don't try and fail later.

RDMA/rxe: Fix incomplete state save in rxe_requester

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix incomplete state save in rxe_requester If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many

btrfs: insert tree mod log move in push_node_left

In the Linux kernel, the following vulnerability has been resolved: btrfs: insert tree mod log move in push_node_left There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP

net: bcmgenet: Add a check for oversized packets

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Add a check for oversized packets Occasionnaly we may get oversized packets from the hardware which exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early check which drops the packet to avoid invoking skb_over_panic() and move on to processing the next packet.

net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: Fix return type of netcp_ndo_start_xmit() With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types

• Actualiza a 4.15.0-1108.119

ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode

In the Linux kernel, the following vulnerability has been resolved: ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode There are many places that will get unhappy (and crash) when ext4_iget() returns a bad inode. However, if iget the boot loader inode, allows a bad inode to be returned, because the inode may not be initialized. This mechanism can be used to bypass some checks and cause panic. To solve this problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag we'd be returning bad inode from ext4_iget(), otherwise we always return the error code if the inode is bad inode.(suggested by Jan Kara)

ALSA: usb-audio: Fix potential memory leaks

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential memory leaks When the driver hits -ENOMEM at allocating a URB or a buffer, it aborts and goes to the error path that releases the all previously allocated resources. However, when -ENOMEM hits at the middle of the sync EP URB allocation loop, the partially allocated URBs might be left without released, because ep->nurbs is still zero at that point. Fix it by setting ep->nurbs at first, so that the error handler loops over the full URB list.

• Actualiza a 4.15.0-1107.118

iommu/vt-d: Clean up si_domain in the init_dmars() error path

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clean up si_domain in the init_dmars() error path A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path.

• Actualiza a 4.15.0-1107.118

cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()

In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

• Actualiza a 4.15.0-1108.119

nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset() Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount time". The first patch fixes a bug reported by syzbot, and the second one fixes the remaining bug of the same kind. Although they are triggered by the same super block data anomaly, I divided it into the above two because the details of the issues and how to fix it are different. Both are required to eliminate the shift-out-of-bounds issues at mount time. This patch (of 2): If the block size exponent information written in an on-disk

• Actualiza a 4.15.0-1108.119

ntb_netdev: Use dev_kfree_skb_any() in interrupt context

In the Linux kernel, the following vulnerability has been resolved: ntb_netdev: Use dev_kfree_skb_any() in interrupt context TX/RX callback handlers (ntb_netdev_tx_handler(), ntb_netdev_rx_handler()) can be called in interrupt context via the DMA framework when the respective DMA operations have completed. As such, any calls by these routines to free skb's, should use the interrupt context safe dev_kfree_skb_any() function. Previously, these callback handlers would call the interrupt unsafe version of dev_kfree_skb(). This has not presented an issue on Intel IOAT DMA engines as that driver utilizes tasklets rather than a hard interrupt han

• Actualiza a 4.15.0-1108.119

macintosh: fix possible memory leak in macio_add_one_device()

In the Linux kernel, the following vulnerability has been resolved: macintosh: fix possible memory leak in macio_add_one_device() Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically. It needs to be freed when of_device_register() fails. Call put_device() to give up the reference that's taken in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hits 0. macio device is freed in macio_release_dev(), so the kfree() can be removed.

• Actualiza a 4.15.0-1108.119

xen/gntdev: Accommodate VMA splitting

In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: Accommodate VMA splitting Prior to this commit, the gntdev driver code did not handle the following scenario correctly with paravirtualized (PV) Xen domains: * User process sets up a gntdev mapping composed of two grant mappings (i.e., two pages shared by another Xen domain). * User process munmap()s one of the pages. * User process munmap()s the remaining page. * User process exits. In the scenario above, the user process would cause the kernel to log the following messages in dmesg for the first munmap(), and the second munmap() call would result in simila

xhci: Remove device endpoints from bandwidth list when freeing the device

In the Linux kernel, the following vulnerability has been resolved: xhci: Remove device endpoints from bandwidth list when freeing the device Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to del

• Actualiza a 4.15.0-1107.118

cgroup: split cgroup_destroy_wq into 3 workqueues

In the Linux kernel, the following vulnerability has been resolved: cgroup: split cgroup_destroy_wq into 3 workqueues A hung task can occur during [1] LTP cgroup testing when repeatedly mounting/unmounting perf_event and net_prio controllers with systemd.unified_cgroup_hierarchy=1. The hang manifests in cgroup_lock_and_drain_offline() during root destruction. Related case: cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio Call Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8

wifi: wilc1000: avoid buffer overflow in WID string configuration

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: avoid buffer overflow in WID string configuration Fix the following copy overflow warning identified by Smatch checker. drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame() error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537) This patch introduces size check before accessing the memory buffer. The checks are base on the WID type of received data from the firmware. For WID string configuration, the size limit is determined by individual element size in 'struct wilc_cfg_str_vals' that is maintained in

cnic: Fix use-after-free bugs in cnic_delete_task

In the Linux kernel, the following vulnerability has been resolved: cnic: Fix use-after-free bugs in cnic_delete_task The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that

dm-stripe: fix a possible integer overflow

In the Linux kernel, the following vulnerability has been resolved: dm-stripe: fix a possible integer overflow There's a possible integer overflow in stripe_io_hints if we have too large chunk size. Test if the overflow happened, and if it did, don't set limits->io_min and limits->io_opt;

net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to