p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-fips · Página 39

Vulnerabilidades publicadas para linux-fips en los últimos 30 días: 393. Incluidas en el catálogo KEV: 0.

RSS ↗ JSON ↗
Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 7065

  1. CVE-2026-90213

    Media · CVSS 5.1EPSS 0,21%Sin corrección publicada

    firewire: core: fix memory leak in error path of build_tree()

    In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix memory leak in error path of build_tree() In the error path of build_tree(), node instances can remain in the local linked list when the function returns. Whenever an invalid value is detected in the self ID sequence, each allocated node instance is either an entry in the linked list or an entry in the ports array of its parent node. Therefore, the allocate node instances can be safely released by traversing the linked list from its head. Release the remaining node instances with for_each_fw_node() before returning to the caller.

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  2. CVE-2026-90208

    Sin evaluarEPSS 0,21%Sin corrección publicada

    clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type

    In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type Samsung PWM timer might be used as a clock source on some legacy systems. When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a sleeping lock (mutex-based), which must not be used in atomic context such as hard interrupt handlers. Switch the samsung_pwm_lock to the raw_spinlock, which remains a true non-sleeping spinlock even under PREEMPT_RT.

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  3. CVE-2026-90207

    Alta · CVSS 7.8EPSS 0,16%Sin corrección publicada

    ALSA: seq: midi: Serialize input teardown with event_input

    In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize input teardown with event_input snd_midi_input_event() must not be running while a rawmidi substream is closing, since this can lead to the trigger state becoming out-of-step through this sequence in snd_rawmidi_input_trigger(): snd_rawmidi_input_trigger(up=0) snd_midi_input_event() -> snd_rawmidi_kernel_read() -> snd_rawmidi_input_trigger(up=1) -> cancel_work_sync() which ends with the underlying device being active unexpectedly. When this is called from close_substream(), further input can re-trigger the input event l

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  4. CVE-2026-90205

    Alta · CVSS 7.8EPSS 0,18%Sin corrección publicada

    ocfs2: validate orphan slot during inode read

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan slots during inode read". OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported. Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation b

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  5. CVE-2026-90204

    Alta · CVSS 7.8EPSS 0,18%Sin corrección publicada

    ocfs2: validate DIO orphan slot during inode read

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (high byte at offset 0xa1 corrupted from 0 to 1) can carry an i_dio_orphaned_slot outside the mounted filesystem slot range and trigger a use-after-free error: BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:11

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  6. CVE-2026-90203

    Alta · CVSS 7.1EPSS 0,17%Sin corrección publicada

    Squashfs: check block offset is not negative

    In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user ca

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  7. CVE-2026-90194

    Sin evaluarEPSS 0,21%Sin corrección publicada

    ACPI: scan: fix bus ID cleanup on device_add() failures

    In the Linux kernel, the following vulnerability has been resolved: ACPI: scan: fix bus ID cleanup on device_add() failures When device_add() fails after acpi_device_set_name() has allocated an instance ID and a new acpi_device_bus_id has been linked into acpi_bus_id_list, the rollback path only removes wakeup_list and detaches the ACPI handle data. That leaves the bus-ID bookkeeping behind and keeps the allocated instance number consumed. Move the bus-ID cleanup and wakeup-list removal into a single helper. Use it from both the normal device teardown path and the device_add() rollback path. The wakeup list node is initialized before reg

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  8. CVE-2026-90189

    Sin evaluarEPSS 0,17%Sin corrección publicada

    null_blk: register configfs subsystem after creating default devices

    In the Linux kernel, the following vulnerability has been resolved: null_blk: register configfs subsystem after creating default devices In null_init(), configfs_register_subsystem() currently runs before register_blkdev(), so when null_blk is built as a module, a racing mkdir() + poweron from userspace can reach null_add_dev() while null_major is still 0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0) and fails: [root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0, [ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib [ 2366.529081] CPU: 26 UID:

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  9. CVE-2026-90188

    Sin evaluarEPSS 0,21%Sin corrección publicada

    null_blk: free global tag_set on init error path

    In the Linux kernel, the following vulnerability has been resolved: null_blk: free global tag_set on init error path If shared_tags is enabled, null_setup_tagset() allocates the global tag_set via null_init_global_tag_set(). If device creation later fails, err_dev destroys the default devices and calls unregister_blkdev(), but never frees the global tag_set. Since module init failed, null_exit() is never invoked, so the global tag_set's tags and maps are permanently leaked. Free the global tag_set in err_dev, matching null_exit() which does if (tag_set.ops) blk_mq_free_tag_set(&tag_set).

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  10. CVE-2026-90184

    Sin evaluarEPSS 0,21%Sin corrección publicada

    null_blk: serialize configfs attribute updates with device setup

    In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute updates with device setup The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to change the configuration of a live device by testing NULLB_DEV_FL_CONFIGURED, but that flag is only set by nullb_device_power_store() after null_add_dev() has returned, and the store methods take no lock at all. configfs only serializes writes to the same open file (buffer->mutex), so a write to any attribute can run concurrently with null_add_dev() and change the device configuration while it is being used. null_add_dev() reads the conf

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  11. CVE-2026-90180

    Sin evaluarEPSS 0,21%Sin corrección publicada

    block: mtip32xx: synchronize ioctls with device removal

    In the Linux kernel, the following vulnerability has been resolved: block: mtip32xx: synchronize ioctls with device removal The ioctl handlers only test REMOVE_PENDING before entering mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already open block device can reach the handlers while del_gendisk() is in progress. Serialize both native and compat ioctls with removal. Set REMOVE_PENDING before taking the mutex so new callers fail after an in-flight ioctl has drained, and hold the mutex until the port has been torn down.

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  12. CVE-2026-90160

    Sin evaluarEPSS 0,22%Sin corrección publicada

    lwt_bpf: Restore reserved headroom after xmit program

    In the Linux kernel, the following vulnerability has been resolved: lwt_bpf: Restore reserved headroom after xmit program ip_finish_output2() expands an skb to LL_RESERVED_SPACE(dev) before LWT xmit. An LWT_XMIT BPF program can then modify the skb head and still return BPF_OK, so bpf_xmit() rechecks the remaining headroom before the skb continues to neighbour output. That recheck uses dst->dev->hard_header_len. This is not enough for the neighbour cached-header path: neigh_hh_output() copies the cached hardware header using the aligned hh_cache size, HH_DATA_MOD for short headers or HH_DATA_ALIGN(hh_len) otherwise. On Ethernet, hard_heade

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  13. CVE-2026-90151

    Crítica · CVSS 9.8EPSS 0,75%Sin corrección publicada

    NFSv4: remove callback IDR entry on client allocation failure

    In the Linux kernel, the following vulnerability has been resolved: NFSv4: remove callback IDR entry on client allocation failure nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it finishes setting up the client. If any later initialization step fails, the error path frees the nfs_client directly with nfs_free_client(). That bypasses nfs_put_client(), which is where the callback IDR entry is removed during normal teardown. A failed allocation can therefore leave cb_ident_idr pointing at a freed nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the stale pointer and take a reference to it. Make the call

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  14. CVE-2026-90150

    Alta · CVSS 7.7EPSS 0,22%Sin corrección publicada

    pnfs/blocklayout: Fix device leaks on parse failure

    In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  15. CVE-2026-90149

    Alta · CVSS 7.5EPSS 0,66%Sin corrección publicada

    NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers

    In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() b

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  16. CVE-2026-90143

    Alta · CVSS 7.8EPSS 0,16%Sin corrección publicada

    net: kcm: Hold RCU read lock while running BPF parser

    In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program.

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  17. CVE-2026-90141

    Alta · CVSS 7.3EPSS 0,45%Sin corrección publicada

    ipvs: fix integer overflow in ftp helper port/address parsing

    In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject val

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  18. CVE-2026-90138

    Media · CVSS 6.8EPSS 0,21%Sin corrección publicada

    vsock: don't check the listener's sk_err in vsock_accept()

    In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  19. CVE-2026-90126

    Sin evaluarEPSS 0,22%Sin corrección publicada

    rtc: pcf8563: fix clock provider leak on unbind

    In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is alrea

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  20. CVE-2026-90116

    Sin evaluarEPSS 0,21%Sin corrección publicada

    ALSA: mtpav: shut down output timer before card teardown

    In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being t

    linux-fipsSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →