In the Linux kernel, the following vulnerability has been resolved:
tty: port: fix tty_port_tty_vhangup() race
Drivers rely on tty_port_tty_vhangup() to synchronously hang up their
ports before tearing down resources as part of deregistration (e.g. on
physical disconnect).
If tty_port_tty_vhangup() races with another hangup it may however
return before the port has been shut down. This is in turn can lead to
use-after-free and NULL-pointer dereferences in racing ioctls (including
a synchronous hangup) and in processing of racing asynchronous hangups
(carrier loss).
Add the missing serialisation to tty_port_tty_vhangup() and
tty_port_hangu
In the Linux kernel, the following vulnerability has been resolved:
tty: abort break signalling on hangup
The break ioctls can race with hangup and end up calling into a tty
driver for a device that is already gone or powered down.
Drivers must handle this race, but TCSBRK and TCSBRKP should still be
aborted to avoid calling back into the driver after a user-controlled
timeout (possibly even after the tty has been reopened).
Note that drivers should disable any break state on shutdown so just
return on hangup (calling break_ctl() again is racy and will most likely
fail for drivers handling the race).
Media · CVSS 5.4EPSS 0,17%Sin corrección publicada
tty: fix saved termios reset race
In the Linux kernel, the following vulnerability has been resolved:
tty: fix saved termios reset race
Resetting saved termios state on device registration is needed where a
minor number can be reused for an entirely different device and where
the old settings may prevent the port from even being opened (e.g. when
CLOCAL is not set).
Not all TTY drivers guarantee that the minor number is no longer in use
when registering devices however, something which can lead to a
use-after-free when closing a TTY (and saving its termios) races with
re-registration.
Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved
termios state is
tty: serial: max3100: shut down timer before freeing port
In the Linux kernel, the following vulnerability has been resolved:
tty: serial: max3100: shut down timer before freeing port
max3100_shutdown() stops the polling timer but returns early during
system suspend. If the SPI device is unbound before resume, the serial
core does not call max3100_shutdown() again, so max3100_remove() frees
the port while the timer remains armed. max3100_timeout() may then
access the freed port and re-arm the timer.
Add final timer teardown to max3100_remove() and use
timer_shutdown_sync() to prevent a racing callback from re-arming it.
Also free the IRQ and destroy the workqueue there before freeing the
port. Ke
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Serialize compat port-info ioctls
The native sequencer ioctl path serializes handler calls with
client->ioctl_mutex, but the translated port-info compat path invokes the
same handlers through snd_seq_kernel_client_ctl() without taking that
mutex.
This lets concurrent compat CREATE_PORT requests pass the port-count
check before any request reaches the serialized insertion. The computed
integer port index can then exceed the address field range and wrap to an
existing index. Subsequent subscriber teardown can resolve the duplicate
address to the wrong port and acc
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ua101: reject mismatched capture/playback packet sizes
detect_usb_format() cross-checks bSubframeSize, bBitResolution and
tSamFreq between the capture and playback interfaces, but never relates
the two endpoints' wMaxPacketSize and bNrChannels. Each playback URB
gets a buffer of ua->playback.max_packet_bytes, while the number of
bytes written into it is derived from the capture stream:
capture_urb_complete() computes frames from the received capture packet
and capture.frame_bytes, and start_usb_playback() and playback_work()
multiply that by playback.frame_bytes.
A
Bluetooth: RFCOMM: Fix initial port reference race
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix initial port reference race
For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and
__rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the
initial tty_port reference. The release path tests the bit separately
from the install path setting it, so both can drop that reference.
The synchronous hangup does not prevent this race: port->tty is not
assigned until tty_port_open(), after installation. The following
interleaving is possible:
1. Install and release each obtain a reference with rfcomm_dev_get().
2. Release observes RFCO
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Serialize SMP remote OOB data access
build_pairing_cmd() looks up remote OOB data and copies its contents
without holding hdev->lock, which serializes the list's writers. After
SMP finds an entry, a concurrent management Remove Remote OOB Data
command can unlink and free it before SMP reads its present flag or
copies its random and confirmation values. Removal can also invalidate
an entry while the lookup is still traversing the list.
KASAN reported:
BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0
Call Trace:
build_pairing_cmd+0x948/0x9b
Bluetooth: hci_core: Serialize ACL scheduling with channel deletion
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Serialize ACL scheduling with channel deletion
hci_chan_sent() selects a channel under RCU but drops the read lock before
accessing chan->conn and returning the channel. The ACL and LE schedulers
then use its packet queue and update its transmit counters without any
protection against channel deletion.
After TX selects a channel and releases RCU, a disconnect command timeout
on the separate request workqueue can run hci_conn_failed() and
l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete
synchronize_rcu(), purge its queue and free i
Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown
hci_low_sent() selects a connection under RCU but drops the read lock
before calculating its quota and returning it to the scheduler. The
connection is then used without lifetime protection by hci_sched_iso()
and hci_sched_sco().
After the TX worker drops the RCU read lock, hci_abort_conn_sync() on
hdev->req_workqueue can remove the connection from the hash, complete
synchronize_rcu(), purge its queues and release it. The TX worker on
hdev->workqueue can then access the freed connection in hci_quote_sent()
Bluetooth: btintel: fix buffer over-read in btintel_hw_error()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: fix buffer over-read in btintel_hw_error()
The "Exception info %s" print uses skb->data + 1, but the 12-byte
payload is not guaranteed to be NUL-terminated and can be read past
its end.
Bound the print with "%.*s" and skb->len - 1.
mtd: block2mtd: Fix divide error when erase_size is zero
In the Linux kernel, the following vulnerability has been resolved:
mtd: block2mtd: Fix divide error when erase_size is zero
The erase size is parsed from the "block2mtd" module parameter and can
be set to zero. add_device() then evaluates
if (size % erase_size)
with a zero divisor, which triggers a divide error:
divide error: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline]
RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459
Call Trace:
block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476
param_attr_store+0x214/0x310 kernel/params.c:589
module_attr_store+
KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN
Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN,
as empirical testing shows that the CPU performs the requested TLB flush if
and only if VMRUN is successful, i.e. clearing TLB control on a failed
VMRUN effectively drops a TLB flush.
Explicitly track the need to flush all ASIDs on a per-CPU basis, as the
ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus,
this also obviates the need to avoid clobbering FLUSH_ALL_ASID with
TLB_CONTROL_FLUSH_ASID, e.g. in svm_
KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded
Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails,
because as per AMD:
there's no explicit architectural guarantee about the behavior in the
presence of VMRUN failures. So the best thing to do would be to assume
that if VMRUN fails, the actions requested in the control fields may not
have been performed.
wifi: cw1200: fix TX padding OOB read leaking heap data to device
In the Linux kernel, the following vulnerability has been resolved:
wifi: cw1200: fix TX padding OOB read leaking heap data to device
The TX path rounds the transfer size up to the bus alignment
(align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends
the padded length straight from the frame buffer, which has no room
reserved for the padding. cw1200_data_write() therefore reads past
the end of the frame and the bus transfer carries those bytes to the
device. A bogus device can collect up to 511 bytes of kernel heap
data per TX frame.
The RX path does not have this problem: it allocates the skb with
the aligned length (alloc_le
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlegacy: 3945: free EEPROM data on remove
il3945_pci_probe() calls il_eeprom_init(), which allocates memory for
the EEPROM data. The probe failure paths release this allocation with
il_eeprom_free(), but the remove path does not free it after a
successful probe.
As a result, the EEPROM data is leaked when the PCI device is removed.
Free the EEPROM data in il3945_pci_remove() before releasing the
mac80211 hardware structure.
This issue was found by manual code inspection.
wifi: mac80211: count only matching reservations in reserved switch
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: count only matching reservations in reserved switch
ieee80211_vif_use_reserved_switch() validates a replacement by counting
assigned links on ctx->replace_ctx and treating reservations too
broadly. A link can still be assigned to the old channel context while
holding a reservation that belongs to a different replacement
operation.
That can make the current replacement appear complete too early. If
another link finalizes first, the function can free the
WILL_BE_REPLACED chanctx while the unmatched link and driver still use
it, leading to a use-after-free in
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: keep paired old chanctx alive
An in-place replacement keeps reciprocal replace_ctx pointers between
the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx.
However, the early free paths only consider assigned and reserved link
users when deciding whether to free the old chanctx.
That lets the old chanctx be freed too early while the replacement
partner still points back to it, either when the last assigned link is
released or when that link successfully reassigns to another existing
context. Later unreserve and switch-finalization paths can the
wifi: mac80211: shut down RX BA session timer on teardown
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: shut down RX BA session timer on teardown
Tearing down an RX BA session can leave the session timer queued on a
freed tid_rx. Later timer-wheel processing and the timer callback itself
then run against freed memory.
An RX BAR handler can dereference tid_rx under RCU before teardown
unpublishes it and stay in its read-side critical section while teardown
deletes the session timer. The stale handler can then rearm the timer
after timer_delete_sync() returns and before the RCU callback frees
tid_rx.
Use timer_shutdown_sync() so rearm attempts become ineffecti
wifi: mac80211: drain PS delivery work during station teardown
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drain PS delivery work during station teardown
Removing an AP or mesh station can notify the driver and wake TXQs after
the station has already been removed from the driver, and can update
num_sta_ps and the power-save queues after station cleanup has purged
them.
sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A
worker that passes that test can be delayed while teardown sets sta->dead
and removes the station from the driver; when it resumes it still runs the
full delivery.
The existing cancel_work_sync() sits near the end of
__clea