ACPI: APEI: GHES: fix ARM section length accounting after header
In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: GHES: fix ARM section length accounting after header
In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm
header with (err + 1), the remaining length was reduced by sizeof(err)
(pointer size) instead of sizeof(*err) (structure size).
That overestimates the bytes left for cper_arm_err_info records and can
let the parser read past the CPER section when err_info_num is large
enough relative to error_data_length.
Use sizeof(*err) so the length accounting matches the pointer advance
and the earlier sizeof(*err) size check.
ACPI: pfr_update: fix stack buffer overflow in query_capability()
In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: fix stack buffer overflow in query_capability()
query_capability() copies four ACPI buffer objects returned by the
firmware _DSM into fixed-size u8[16] fields in struct
pfru_update_cap_info using memcpy with the firmware-supplied length:
memcpy(&cap_hdr->code_type,
elements[CAP_CODE_TYPE_IDX].buffer.pointer,
elements[CAP_CODE_TYPE_IDX].buffer.length);
The same pattern repeats for drv_type, platform_id, and oem_id.
If the firmware returns buffer.length > 16 for any of these fields,
memcpy writes past the destination array.
struct pfru
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps
auxdisplay: charlcd: cancel backlight work on registration failure
In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: charlcd: cancel backlight work on registration failure
With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before
charlcd_register() calls misc_register(). If registration fails, the
caller frees the charlcd object while delayed work still contains its
address.
Add charlcd_deinit() to cancel the delayed work and turn the backlight
off. Use it for both registration rollback and normal unregistration.
Bluetooth: eir: Fix OOB read in eir_get_service_data()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix OOB read in eir_get_service_data()
eir_get_service_data() walks the advertising data for a Service Data
field with a matching UUID. On a mismatch it advances:
eir += dlen;
eir_len -= dlen;
eir_get_data() reports dlen as the field's data length, but the field
spans dlen + 2 bytes once its length and type bytes count, and more
when non-Service-Data fields were skipped to reach it. The pointer
lands correctly on the next field. eir_len does not, and the shortfall
compounds across fields until eir_get_data() reads the length and type
bytes of a
bnx2x: fix double free in bnx2x_init_firmware() error path
In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix double free in bnx2x_init_firmware() error path
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-o
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->
bpf: Harden bloom filter sizing and indexing on 32-bit kernels
In the Linux kernel, the following vulnerability has been resolved:
bpf: Harden bloom filter sizing and indexing on 32-bit kernels
bloom_map_alloc() has two 32-bit-specific problems when the computed
bitmap reaches the U32_MAX fallback case.
First, BITS_TO_BYTES(U32_MAX) is evaluated with 32-bit arithmetic. The
addition performed by DIV_ROUND_UP wraps, so the map allocates only the
fixed-size bloom filter object while keeping bitset_mask == U32_MAX.
Subsequent updates can then write past the allocated object.
Second, fixing only the allocation size is not sufficient. The bloom hash
is a u32, but set_bit() takes a signed long bit number an
dm-era: fix shadowed superblock leak on take-snap failure
In the Linux kernel, the following vulnerability has been resolved:
dm-era: fix shadowed superblock leak on take-snap failure
metadata_take_snap() bumps the live superblock refcount and then
dm_tm_shadow_block() allocates a new block for the metadata snapshot.
If the subsequent dm_sm_inc_block() of writeset_tree_root or
era_array_root fails, the function only unlocks the clone and
returns. The newly allocated shadow block is never returned to the
metadata space map, so each failed take-snap permanently leaks one
metadata block.
Free the clone with dm_sm_dec_block() on those error paths, matching
the final step of metadata_drop_snap().
dm raid1: reserve space for NUL-terminator in build_constructor_string()
In the Linux kernel, the following vulnerability has been resolved:
dm raid1: reserve space for NUL-terminator in build_constructor_string()
Reserve space for the termination NUL after the maximum 20 decimal
digits of a long long value to avoid buffer overflow in sprintf().
In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: rejec
dm array: reject an array block whose value size is not the caller's
In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() ar
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the polic
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
Media · CVSS 5.7EPSS 0,21%Sin corrección publicada
jbd2: bound shrinker scans by examined checkpoint buffers
In the Linux kernel, the following vulnerability has been resolved:
jbd2: bound shrinker scans by examined checkpoint buffers
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement i
Media · CVSS 5.7EPSS 0,21%Sin corrección publicada
jbd2: check need_resched() when skipping busy checkpoint buffers
In the Linux kernel, the following vulnerability has been resolved:
jbd2: check need_resched() when skipping busy checkpoint buffers
journal_shrink_one_cp_list() skips busy checkpoint buffers when called
with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also
skips the need_resched() check at the end of the loop body.
Consequently, when a checkpoint list contains mostly busy buffers, the
shrinker can walk the entire list while holding journal->j_list_lock,
even when a reschedule has been requested. Large checkpoint lists under
memory pressure can therefore cause long lock hold times and leave other
CPUs spinning on j_list_lo
ipip: fix skb leak in collect_md mode when metadata_dst allocation fails
In the Linux kernel, the following vulnerability has been resolved:
ipip: fix skb leak in collect_md mode when metadata_dst allocation fails
In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb
when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and
mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv()
and tunnelmpls4_rcv() read the zero return as "the packet has been
consumed" and do not free it either. The skb is leaked.
The other tunnel drivers all dispose of the packet at this point:
ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return
PACKET_REJECT, which makes gre_rcv()
ip: orphan prefetched skbs before multicast forwarding
In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb
In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit()
ip6_tnl_xmit() may need to expand headroom before it can push the
outer IPv6 and optional encap headers. It currently does that with
skb_realloc_headroom(), copies skb->sk ownership, consumes the original
skb, and then continues processing with the replacement skb kept only in
its local variable.
That is safe only if the helper cannot fail afterwards. But this helper
still has post-reallocation error exits. collect_md tunnels reject
non-NONE encap after the replacement, and ip6_tnl_encap() can also fail
later. In those cases
ip6_gre: fix hardware header length for NBMA tunnels
In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: fix hardware header length for NBMA tunnels
ip6gre_tnl_link_config_route() accumulates the lower device's hardware
header length into dev->hard_header_len whenever header_ops is set. This
is incorrect for both users of header_ops.
ip6gretap and ip6erspan have a fixed Ethernet hardware header length.
For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header,
the optional FOU or GUE header, and the outer IPv6 header. The lower
device header is headroom needed later, not part of the tunnel device's
hardware header.
Keep the lower device header in needed