In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Harden DMC firmware payload parsing
Validate the conversion of the DMC firmware size from dwords to bytes
using check_mul_overflow() before calculating the firmware payload size.
Reject zero-length payloads and zero MMIO counts in the DMC firmware
header so malformed firmware is caught early. Also set dmc_fw_size only
after the payload allocation succeeds.
(cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef)
net: bridge: mcast: don't truncate the port group walk on teardown
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION,
that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns
FileSysIdentifier. Those eight bytes go to the client as they are found
in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response o
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION,
that is the whole of struct smb2_fs_control_info, but never assigns
FileSystemControlFlags. Those four bytes go to the client as they are
found in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the s
ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in
smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION,
that is the whole of struct object_id_info, but writes only 46 of them:
- objid[] is 16 bytes, and when the volume UUID is not available only
sizeof(stfs.f_fsid) (8) bytes are copied into it;
- extended_info.version_string[] is STRING_LENGTH (28) bytes, and only
strlen("1.1.0") (5) bytes are copied into it.
The response buffer is zeroed on allocation (kvzalloc() in
smb2_allocate_rsp_buf()), so for a standalone request the r
net/sched: cls_flower: validate mask pointer after nla_next()
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and sib
smb: client: fix heap overflow in cifs_do_set_acl()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in cifs_do_set_acl()
cifs_set_acl() validates ACL size using posix_acl_xattr_size():
4 + (count * 8) // 4-byte header + 8 bytes per ACE
cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS
wire format into the same buffer:
6 + (count * 10) // 6-byte header + 10 bytes per ACE
An ACL that passes the xattr-based check in cifs_set_acl() can
overflow the heap when posix_acl_to_cifs() writes the larger CIFS
format.
Validate the CIFS format size against the remaining buffer space and
USHRT_MAX before converting--d
smb: client: reject SetEA requests that do not fit the request buffer
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject SetEA requests that do not fit the request buffer
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len > buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#defin
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of
the BO list and looks up the user pages. Those ranges are only freed when
amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks
them under the notifier lock. If amdgpu_cs_patch_jobs(),
amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of
amdgpu_cs_submit() fails, nothing frees them: neither
amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e->range.
Each such CS then leaks the range, its hmm_pfns
workqueue: Fix unbound pool lifetime for pending pwqs
In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix unbound pool lifetime for pending pwqs
KASAN reports a use-after-free of an unbound worker_pool in
node_activate_pending_pwq():
BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120
Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318
CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: 0x0 (flush-8:0)
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x610
kasan_report+0xce/0x100
ntfs: move attribute payload before shrinking its record
In the Linux kernel, the following vulnerability has been resolved:
ntfs: move attribute payload before shrinking its record
ntfs_new_attr_flags() resizes the non-resident attribute record before
moving its name and mapping pairs to their shorter-header offsets when
compression or sparse state is cleared.
Shrinking the record first moves the following attribute over the tail of
the old record. The subsequent memmove() therefore copies bytes from that
following attribute instead of the old mapping pairs. Re-enabling
compression on an empty file persists those bytes as a malformed mapping
pairs array, which ntfsck reports as a missing or inv
In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate firmware record lengths
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver sta
drm/vc4: drain the hangcheck timer and works on V3D unbind
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: drain the hangcheck timer and works on V3D unbind
Nothing stops the hangcheck timer that submitted jobs arm, or the
job_done_work that the render-done interrupt queues, at teardown:
vc4_irq_disable() cancels only overflow_mem_work, and vc4_gem_destroy()
runs from the drm-managed release, after vc4_v3d_unbind() has already
uninstalled the V3D interrupt and cleared vc4->v3d. A timer still armed
by then reads V3D registers through the NULL vc4->v3d pointer, and the
late callbacks run on the vc4_dev embedding them after it has been
freed.
Drain them in vc4_v3d_unbind(
Bluetooth: MGMT: Fix status of pending commands flushed on power off
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix status of pending commands flushed on power off
cmd_complete_rsp() receives a struct cmd_lookup and, for a pending
command that has no cmd_complete callback, falls through to
cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so
the status sent comes from the first byte of match->sk's
representation, not from match->mgmt_status.
commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on
mgmt_index_removed") changed the callers' data from &status to &match
and updated the cmd_complete branch to match->mgmt_status, but left
the fall-thro
drm/amdgpu: serialize vblank counter reads against GPU reset
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: serialize vblank counter reads against GPU reset
The vblank counter callback reads display registers and scanout
position without holding reset_domain->sem. During GPU recovery,
display commit work can call the callback while reset owns the
semaphore for writing. The hardware access then triggers the
lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets
TAINT_WARN when lockdep is enabled.
Try to acquire the reset semaphore for reading before accessing the
hardware, and hold it across the counter and scanout-position reads.
If reset is already in prog
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
In the Linux kernel, the following vulnerability has been resolved:
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
The probe function puts the device into the runtime PM active state with
only the "iis" bus clock enabled, but it also sets priv->op_clk to the
parent of the RCLK_SRC mux without enabling it. The runtime PM suspend
callback disables both clocks, so the first runtime suspend after probe
disables op_clk once more than it was enabled.
On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate,
so this triggers the following warning during boot:
WARNING: drivers/clk/clk.c:1270 at clk_core_disable
net: openvswitch: validate transport header presence in set_ipv6_addr
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: validate transport header presence in set_ipv6_addr
When executing IPv6 address rewrite actions on IPv6 fragments,
set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr()
processes a non-first IPv6 fragment, it sets key->ip.proto to
NEXTHDR_FRAGMENT and returns early without calling
skb_set_transport_header().
update_ipv6_checksum() unconditionally evaluates skb_transport_offset()
on entry before checking l4_proto. Because skb->transport_header is
uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although
it is completely harmless.
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the
user activates the device in the 'R' mode, a crash in dm_integrity_resume
happens because the function attempts to read the journal containing the
bitmap.
This patch makes dm-integrity skip any writes to the device in
dm_integrity_resume if the device is activated in the 'R' mode.
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journa
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In krb5_authenticate(), out_len is calculated to determine available
headroom in response_buf for the incoming Kerberos AP-REP token. However,
when SMB2_SESSION_SETUP is processed as a non-first element of a compounded
SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off.
This causes out_len to overstate remaining buffer headroom by
the cumulative size of prior responses in the compound chain. Consequently,
the length check in ksmbd_krb5_authenticate()
(*out_len <= resp->spnego_blob_len) passes erroneous