PatchFirst · Vulnerabilidades recientes
Vulnerabilidades publicadas para linux-realtime-6.8 en los últimos 30 días: 758. Incluidas en el catálogo KEV: 0.
Vulnerabilidades: 9418
In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix off-by-one in port I/O handling handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use: u64 mask = GENMASK(BITS_PER_BYTE * size, 0); GENMASK(h, l) includes bit h. For size=1 (INB), this produces GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8 bits). The mask is one bit too wide for all I/O sizes. Fix the mask calculation.
In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Clear copied tracing state before fork duplication dup_task_struct() copies user_event_mm from the parent into the child, without grabbing a reference to it. user_event_mm_dup() should replace it, but it leaves that copied pointer unmodified if user_event_mm_alloc() fails. When the child exits, user_event_mm_remove() decrements a reference the child never owned, which ultimately frees user_event_mm, while the parent still as a stale pointer to it. This creates a UAF, which KASAN reports as: BUG: KASAN: slab-use-after-free in current_user_event
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching th
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in trace_pipe read on sub-buffer order change Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(), which frees every sub-buffer of the ring buffer, including the reader page, and replaces them with newly allocated ones. Readers of trace_pipe hold pointers into those pages. ring_buffer_peek() looks up an event under cpu_buffer->reader_lock but returns the event pointer after dropping the lock, and peek_next_entry() then calls ring_buffer_event_length() and ring_buffer_event_data() on it. If the sub-buffer order is changed in tha
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry,
In the Linux kernel, the following vulnerability has been resolved: device property: fix infinite loop in fwnode_for_each_child_node() When iterate over children of a fwnode that has a secondary fwnode, fwnode_get_next_child_node() can enter an infinite loop if the secondary fwnode has more than one child. Parent Child (Primary fwnode) FWa: {FWa1, FWa2, FWa3} (Secondary fwnode) FWb: {FWb1, FWb2} In this case: ┌─> fwnode_get_next_child_node(FWa, FWa1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2 │ │ ... │ │ fwnode_get_next_child_node(FWa, FWa3) │ - fwn
In the Linux kernel, the following vulnerability has been resolved: misc: nsm: bound the device-reported response length nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported by the NSM device into msg->resp.len without bounding it to the response buffer. A malicious or buggy backend can report a length larger than the response buffer; parse_resp_raw() then copies that many bytes out of the fixed buffer to user space, disclosing adjacent kernel heap (an out-of-bounds read). The request path already floors its length in fill_req_raw(); the response path lacks the symmetric check. Clamp the stored length to the size of the
In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_mutex through req->map, drops the mapping reference with kref_put(), and then dereferences req->map again to unlock the mutex. If kref_put() drops the last reference, mport_release_mapping() frees the mapping, and the subsequent mutex_unlock() dereferences a freed object. This is a use-after-free. Fix this by caching map and md before kref_put(), clearing req->map while holding buf_mutex, and using the cached md for mutex unlocking. The bug is reachable from userspace via the RapidIO m
In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a. The intentions of that patch were good, but it doesn't work. The idea is that if device_register fails, you have to do a put_device to let the ref counter release resources. However, the V4L2 API says that if video_register_device() fails, then you have to call video_device_release(), which kfree()s the video_device struct. But the put_device() will already have freed the struct, so you end up in a double-free scenario. There is not re
In the Linux kernel, the following vulnerability has been resolved: serial: imx: serialize imx_uart_ports[] lifetime imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[] before uart_add_one_port() because console setup uses the table. The entry is not cleared when adding the port fails or after removal, leaving a dangling pointer. A sibling probe can register the shared console through that stale entry. This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a sibling UART, unbinding the console UART and rebinding the sibling. Keep the entry valid through uart_remove_one_port(), then clear it. Protect port addi
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via mod_timer(). Both recover the same udc through container_of and dereference it on every iteration. Neither teardown path cancels this cycle. udc is devm-allocated, so it is freed after at91udc_remove() returns, and is likewise freed when probe fails and devres runs. A timer callback or wo
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound card teardown and immediately frees the underlying struct snd_uac_chip context. However, snd_card_free_when_closed() returns asynchronously while ALSA control elements (kctls) remain open in userspace. When userspace control applications access or close these open file descriptors, kctl callbacks attempt to dereference kctl->private_data pointing to &uac->c_prm or &uac->p_prm within the freed uac structure, resulting in a use-after-free
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: remove default configfs groups on teardown f_midi2_alloc_inst() creates default configfs child groups for the default endpoint and default block using configfs_add_default_group(), setting their internal refcount to 1. However, during function teardown in f_midi2_free_inst() or EP cleanup in f_midi2_ep_opts_release(), configfs_remove_default_groups() is never called, therefore never dropping the refcount and leaking struct f_midi2_ep_opts and f_midi2_block_opts. Add the missing configfs_remove_default_groups() in the afformentioned functions to free th
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind() In uvc_function_bind() error path, we use usb_ep_free_request which uses uvc->control_req but does not set it to NULL afterwards. Thus, uvc->control_req is a dangling pointer causing a UAF. Also we do not set the uvc->control_buf pointer to NULL after freeing it, which is another dangling pointer. Fix it by setting uvc->control_req to NULL after we run usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the same for uvc_function_unbind().
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent deadlock during ep0 read loop Currently, ffs_ep0_read() holds ffs->mutex when it prepares to go to sleep waiting for an event. When no setup events are pending, it calls wait_event_interruptible_exclusive_locked_irq() with the mutex still held. The wait macro deliberately drops the waitqueue spinlock before sleeping but does not drop the mutex. If a userspace daemon is polling ep0 via read() and the gadget is asynchronously torn down via configfs (e.g., echo "" > UDC), a deadlock can occur: 1. The configfs teardown calls functionfs_unbind(), whi
In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from the RCRB MMIO block using a readl() loop bounded by sizeof(struct aer_capability_regs). This struct is a software layout and its embedded struct pcie_tlp_log is larger than the on-wire AER capability. As a result the loop reads past the mapped AER register block. The over-read also populates the software-only tail fields including header_log.header_len. An out-of-range header_len passed to pcie_print_tlp_log() can then loop past the
In the Linux kernel, the following vulnerability has been resolved: fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write The trailing byte path in altera_cvp_send_block() dereferences a u32 pointer even when only 1-3 bytes remain in the input buffer. If the buffer ends at a page or scatterlist boundary, this can read past the valid image data and fault. Copy the remaining bytes into a zero-initialized u32 before writing the final word so only valid bytes are read from the input buffer.
In the Linux kernel, the following vulnerability has been resolved: HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature sensor_hub_get_feature() clamps its return value to the caller's buffer size, but the copy loop still copies field->report_size / 8 bytes for each report value. A malicious HID descriptor can advertise a large feature field size while an IIO caller supplies a small stack buffer, such as a single s32, causing an out-of-bounds write. HID core stores parsed report values in __s32 slots and clamps extracted values to 32 bits. Reject feature fields that require more than one slot per value, guard the total byte
In the Linux kernel, the following vulnerability has been resolved: lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen() Patch series "lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()", v2. This series fixes an off-by-one out-of-bounds read in ucs2_strnlen(). The first patch is the real fix, the second patch comes as a bonus and fixes the code indentation. This patch (of 2): ucs2_strnlen() checks the current character before checking whether the caller-provided maximum length has been reached. If the input is not NUL-terminated within that bound, the loop can read one ucs2_char_t past the limit. Test the length befo
In the Linux kernel, the following vulnerability has been resolved: media: cec: stm32: prevent out-of-bounds write on RX overflow stm32_rx_done() appends each received CEC byte to rx_msg.msg[] using rx_msg.len as the write index, incrementing it on every RXBR (receive-byte-ready) interrupt without checking it against the buffer size: cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF; rx_msg.msg[] is a fixed CEC_MAX_MSG_SIZE (16) byte array in struct cec_msg, and rx_msg.len is only reset on RXACKE/RXOVR or after a completed message (RXEND). The number of bytes received before RXEND is decided by the remote CEC device (it sets EOM), not by t
Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.