PatchFirst · Vulnerabilidades recientes
Vulnerabilidades publicadas para linux-realtime en los últimos 30 días: 759. Incluidas en el catálogo KEV: 0.
Vulnerabilidades: 10223
In the Linux kernel, the following vulnerability has been resolved: HID: steam: Reject short reads Steam Controller FEATURE reports encode the size of the message in the message itself. Previously we were trusting that the size reported matched the size we actually read, leading to a potential issue with short reads. Instead, we should actually verify the length of the read.
In the Linux kernel, the following vulnerability has been resolved: phonet: pep: do not write beyond optlen in getsockopt pep_getsockopt() clamps the reported length to the caller's buffer with min_t(), but then stores the value with put_user(val, (int __user *) optval), which always writes sizeof(int) bytes. A getsockopt() call with an optlen smaller than sizeof(int) thus reports the clamped length yet writes a full int, one to three bytes past the user buffer. Write the value with copy_to_user() bounded by len, so at most optlen bytes are copied, matching the length reported back to userspace.
In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to releas
In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: skip dying blkg in blkcg_activate_policy() When switching IO schedulers on a block device, blkcg_activate_policy() can race with concurrent blkcg deletion, leading to a use-after-free in rcu_accelerate_cbs. T1: T2: blkg_destroy kill(&blkg->refcnt) // blkg->refcnt=1->0 blkg_release // call_rcu(__blkg_release) ... blkg_free_workfn ->
In the Linux kernel, the following vulnerability has been resolved: ublk: check import_ubuf() return value import_ubuf() can fail if the address range (provided by the userspace ublk server) is outside the allowed user address space. Return that 0 bytes were copied if import_ubuf() fails rather than passing an uninitialized struct iov_iter to ublk_copy_user_pages().
In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: keep heartbeat local node stable o2nm_node_local_store() handles local=0 by stopping o2net and setting cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set. That stale state makes o2nm_this_node() return 255, blocks a later local=1 attempt with -EBUSY, and can feed 255 to heartbeat users that call o2nm_this_node() dynamically. Clearing cl_has_local is required when the local node is reset. But heartbeat threads can still be running at that point. They pin the local node config item at startup, yet o2hb_do_disk_heartbeat() and thread tear
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first
In the Linux kernel, the following vulnerability has been resolved: rapidio: clear mport->net when rio_add_net() fails rio_alloc_net() stores the newly allocated rio_net in mport->net before rio_scan_alloc_net() registers the device. If rio_add_net() fails, rio_scan_alloc_net() drops the device reference with put_device(), which releases the rio_net through the device release callback. However, mport->net is left pointing at the freed object. A later mport unregister path can then dereference the dangling mport->net pointer and may try to free the same rio_net again. Clear mport->net in the rio_add_net() failure path, matching the clean
In the Linux kernel, the following vulnerability has been resolved: fat: release buffer head after rebuilding parent fat_scan_logstart() leaves the matching directory entry's buffer head in sinfo.bh for the caller to release, just like fat_scan(). fat_rebuild_parent() uses the directory entry to rebuild the parent inode for the nostale_ro NFS export path, but does not release sinfo.bh after a successful scan. Release it once fat_build_inode() has consumed the directory entry data.
In the Linux kernel, the following vulnerability has been resolved: bpf: Invalidate RCU pointers after final spin unlock In a sleepable BPF program, a spin lock can provide the only RCU protection for a kptr. The final bpf_spin_unlock() ends that protection, but the verifier leaves the pointer valid. Another CPU can then free the object before the pointer is used. A capability-limited runtime PoC triggered a task_struct use-after-free in __bpf_get_task_stack(). Record whether the program is in an RCU-protected context before releasing the lock. Invalidate RCU-protected pointers only when the unlock leaves the final such context. This prese
In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the corresponding table was copied. Nobody seems to unregister stuff that way, so it does not help. But there are stack-allocated objects passed to these isrs giving chances of UAF of these objects if irqs are unregistered while they are handled, so better do not copy that table.
In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers Currently, the legacy I/O and memory sysfs handlers do not check security_locked_down(LOCKDOWN_PCI_ACCESS), leaving the legacy_io and legacy_mem files unprotected when the kernel is locked down. Commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") added the check to pci_write_config(), pci_mmap_resource(), and pci_write_resource_io() to prevent userspace from programming DMA-capable hardware that could be used to modify kernel code, but did not cover the legacy handlers. As a resu
In the Linux kernel, the following vulnerability has been resolved: remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry() table->offset[i] is a u32 from firmware, but was stored into a signed int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes before the table buffer. The subsequent avail check was bypassed because the negative int was promoted to a large size_t in the expression "table_sz - offset - sizeof(*hdr)", yielding a large positive avail and letting the out-of-bounds hdr->type read proceed undetected. Store the offset as u32 and validate it with unsigned comparisons before any pointer arith
In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix invalid storage access after __cgroup_bpf_attach failed A potential invalid storage access issue can occur after replacing a cgroup bpf prog. This occurs in the following scenario: 1. prog1 with storage is attached to a cgroup in multi-attach mode. 2. prog1 is replaced with prog2 using BPF_F_REPLACE in multi-attach mode, but fails midway (e.g. in bpf_trampoline_link_cgroup_shim or update_effective_progs). 3. A new prog3 is attached to the cgroup in multi-attach mode. The reason is that __cgroup_bpf_attach overwrites pl->storage with the new storage
In the Linux kernel, the following vulnerability has been resolved: thermal: hwmon: Remove hwmon class device along with its parent The current code creates one hwmon device per thermal zone type and that device is registered under the first thermal zone of the given type. That turns out to be problematic when the thermal zone holding the hwmon device is removed. For example, say that there are two ACPI thermal zones on a system /sys/devices/virtual/thermal/thermal_zone0/ /sys/devices/virtual/thermal/thermal_zone1/ The current code registers a hwmon class device for thermal_zone0 only: /sys/devices/virtual/thermal/thermal_zone0/hwmo
In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold CQ references when processing EQ events EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or error callbacks outside the xarray lock. erdma_destroy_cq() can erase the CQ from the xarray and free its queue buffer and doorbell record while a previously scheduled EQ handler is still using the CQ. Add a CQ refcount and take a reference under the xarray lock with refcount_inc_not_zero(). Remove the CQ from the xarray before dropping the destroy-path reference, then wait for in-flight EQ users before releasing CQ resources.
In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold QP references for AE and CM processing AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa and then use or reference them outside the xarray lock. erdma_destroy_qp() can drop the destroy-path reference and free QP resources while such a lookup is in flight. Add erdma_qp_get_by_qpn() to acquire a kref under the xarray lock with kref_get_unless_zero(). Remove the QP from the xarray before dropping the destroy-path reference so no new lookup can acquire it while destruction waits for existing users.
In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes nothing to srp_process_cred_req() and srp_process_aer_req(), which read fixed-size fields from the receive buffer without checking that those fields were received. The buffer size is max_ti_iu_len, which comes from the login response and is not validated. A target that advertises 8 and then sends an 8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent back, s
In the Linux kernel, the following vulnerability has been resolved: ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set, a user fault may trigger show_pte() without any lock. If another thread in the same process concurrently calls munmap(), the page table pages may be freed while show_pte() is still traversing them, causing a use-after-free in show_pte(). If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table of PMD are freed when show_pte() is running. Acquire mmap_write_lock() around show_pte() for user faults to fix the contention. For
Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.