wifi: wilc1000: validate assoc response length before subtracting header
In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: validate assoc response length before subtracting header
wilc_parse_assoc_resp_info() computes the trailing IE length as
ies_len = buffer_len - sizeof(*res);
without first checking that buffer_len is at least sizeof(struct
wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a
received association response (host_int_parse_assoc_resp_info() passes
hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be
validated before the driver accesses the fixed header.
For a frame shorter than the 6-byte fixed header, the subtraction wraps.
For
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(),
wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [
wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_co
wifi: brcmfmac: make release_scratchbuffers idempotent
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: make release_scratchbuffers idempotent
brcmf_pcie_release_scratchbuffers() frees the shared.scratch and
shared.ringupd DMA buffers with dma_free_coherent() but does not clear
the pointers afterwards, unlike the sibling release_ringbuffers() which
NULLs commonrings/flowrings/idxbuf on release.
Both the bus_reset .reset callback (brcmf_pcie_reset) and
brcmf_pcie_remove() call release_scratchbuffers. When reset teardown
has run before removal, remove's own teardown would call
dma_free_coherent() a second time on the already-freed DMA allocation.
NULL the poi
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
rtw_get_wps_ie() iterates over IE data from network frames without
validating that the IE header and payload fit within the remaining
buffer before reading them. Specifically:
- in_ie[cnt + 1] is read without checking cnt + 1 < in_len
- memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check
- in_ie[cnt + 1] is used as length without verifying payload fits
Add bounds checks at the top of the loop body to break early if fewer
than 2 bytes remain for the IE header, or if the declared payload
extends past the e
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Protect UUID list traversal
The hci_sync conversion moved class-of-device and EIR generation from an
HCI request built under hdev->lock to asynchronous command sync work.
The worker holds hdev->req_lock, but that lock does not serialize access
to hdev->uuids against add_uuid() and remove_uuid(), which update the
list under hdev->lock.
The following interleaving can therefore occur:
CPU0 (command sync work) CPU1 (management socket)
fetch uuid from the list
list_del(&uuid->list)
k
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc-
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
In the Linux kernel, the following vulnerability has been resolved:
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process be
binfmt_misc: set have_execfd only once the interpreter is opened
In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: set have_execfd only once the interpreter is opened
load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O'
(or 'C') flag. This happens well before it opens the interpreter. If
that open fails the flag stays set on the bprm. binfmt_misc is at the
head of the format list so an interpreter open failure that returns
-ENOEXEC lets the search fall through to a later format. This means it
runs the matched binary directly having never staged an interpreter. So
bprm->executable is NULL while have_execfd falsely claims a descriptor
is present.
Consequent
LoongArch: Move jump_label_init() before parse_early_param()
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
In the Linux kernel, the following vulnerability has been resolved:
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
mmc_ioctl_cdrom_volume() first reads the audio control mode page into a
32-byte stack buffer with cgc->buflen set to 24. If the device reports a
block descriptor, the function increases cgc->buflen to include that
descriptor and reads the page again.
For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list
by moving cgc->buffer forward by offset - 8 bytes. This drops the block
descriptor from the outgoing payload and leaves a new 8-byte mode
parameter header in front of the audio control page. However, c
firmware: stratix10-svc: fix memory leaks and list corruption bugs
In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error
path. Switch pmem allocation from devm_kzalloc() to kzalloc() with
explicit kfree() in the free path to match its list-managed lifetime.
Remove the erroneous list_del(&svc_data_mem) which corrupted the list head
on failed lookups.
comedi: comedi_parport: deal with premature interrupt
In the Linux kernel, the following vulnerability has been resolved:
comedi: comedi_parport: deal with premature interrupt
Syzbot reported a general protection fault in
`comedi_get_is_subdevice_running()`, which was called from the interrupt
handler `parport_interrupt()` in the "comedi_parport" driver, but it
does not currently have a C reproducer for the problem. It's
probably due to a premature interrupt for one of two reasons:
1. The driver sets up the interrupt handler before the comedi subdevices
used by the interrupt handler have been allocated, but does not
disable the interrupt in the parallel port's CTRL register first.
2. T
mei: bus: access mei_device under device_lock on cleanup
In the Linux kernel, the following vulnerability has been resolved:
mei: bus: access mei_device under device_lock on cleanup
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too.
In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix MSC output device reference leak
intel_th_output_open() looks up the output device with
bus_find_device_by_devt(), which returns the device with a reference that
must be dropped after use.
commit 95fc36a234da ("intel_th: fix device leak on output open()")
attempted to drop the reference from intel_th_output_release(). However,
a successful open replaces file->f_op with the output driver file
operations before returning, so close runs the output driver release
callback instead.
For MSC outputs, close runs intel_th_msc_release(), which only removes
the per-fil
misc: nsm: only unlock nsm_dev on post-lock error paths
In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: only unlock nsm_dev on post-lock error paths
nsm_dev_ioctl() jumps to the common out label even when the initial
copy_from_user() fails before nsm->lock has been taken. The error path
then blindly unlocks a mutex that was never acquired.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the miscdevice ioctl entry and the pre-lock
copy_from_user(&raw, argp, _IOC_SIZE(cmd)) failure path by issuing
NSM_IOCTL_RAW with an invalid user pointer. That failure reaches the
shared out label before
misc: nsm: pin the module while the device is open
In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: pin the module while the device is open
misc_open() installs a misc driver's file operations with fops_get(),
which pins file_operations::owner before replacing the file's f_op. The
NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does
not take a module reference on the nsm driver.
If the driver is built as a module, an open file descriptor can therefore
survive rmmod of the module that provides its ioctl callbacks. A later
ioctl through that descriptor can call into unloaded module text.
Set nsm_dev_fops.owner to THIS_MODULE so the misc c
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it.
tracing: Fix resource leak on mmiotrace trace_pipe close
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was added May 12th 2008. At that time, resources
created in pipe_open() could not be freed because there was not
pipe_close function pointer of the tracer. The pipe_close function pointer
was added in December 7th, 2009, but the mmiotrace tracer was not updated.
mmio_pipe_open() allocates a header_iter and takes a pci_dev reference
when trace_pipe is opened. mmio_close() frees them, but it was only
wired to the tracer's .close callback.
tracing_release_pipe() invokes .pipe_close, not .close, whe