net: usb: pegasus: don't rely on id table pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. Instead of
keeping a side table for additional information, use driver_info field of
the usb_device_id.
The dynamic ID parsing code needs to be updated for this; convert it to
just write to the reserved entry for dynamic ID and remove the weird loop.
usb: xusbatm: don't rely on id table pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
usb: xusbatm: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. xusbatm
initialize the USB device IDs dynamically so it can just use driver_info
too.
Even with conversion, xusbatm still cannot support dynamic IDs, so also set
no_dynamic_id.
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing
bugs exposed on the error path of qla25xx_create_{req,rsp}_que():
1. When dma_alloc_coherent() fails during queue creation, the error
path calls the free function with req->ring / rsp->ring still NULL
(from kzalloc). The unconditional dma_free_coherent() with a NULL
cpu_addr is undefined behavior and can panic.
2. The free functions clear req_qid_map / rsp_qid_map under vport_lock,
but the create functions protect th
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules
qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work()
dereferences the qpair (vha, rsp) and takes qpair->qp_lock.
During teardown, qla2xxx_delete_qpair() deletes the response queue, which
calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and
the qpair. free_irq() waits for running hardirq handlers but does not
cancel work already placed on ha->wq. A still-pending q_work then runs
qla_do_work() against the freed q
scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size
The VP control IOCB selects its target virtual port by setting one bit
in vp_idx_map, a fixed 16-byte (128-bit) array in both
vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb()
computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map]
without checking that map stays within the array.
max_npiv_vports is taken from firmware and only sanitized to a
MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or
255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports.
f2fs: accurately adjust free_sections during free_segment_range
In the Linux kernel, the following vulnerability has been resolved:
f2fs: accurately adjust free_sections during free_segment_range
In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs`
to restrict block allocation to the safe remaining main area while valid
blocks in the truncated range are evacuated by GC.
However, FREE_I(sbi)->free_sections tracks the total number of free
sections across the whole filesystem. If any sections within the
truncated range were already free upon entering free_segment_range(),
failing to deduct them from free_sections causes the filesystem to
overestimate available free sections in the acti
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_p
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under
vport_slock, takes a vref_count on the matching vport and calls
qla_update_host_map() to register its port id.
A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then
qla24xx_disable_vp() removes the vport from the host_map btree and zeroes
vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later,
in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX)
but does not touch host_map. In the window
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature
qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll
rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide
whether the next continuation IOCB has arrived, spinning on cpu_relax()
without advancing the ring or decrementing the entry count while it has
not. response_t::signature lives at byte offset 60, but a continuation
IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame
payload at that offset (data[56..59]). A received frame whose payload
bytes happen to equal
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whos
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() be
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent
In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid unneeded actions on subflow reset
Once in a blue moon, the mptcp receive path can recursively call
mptcp_data_ready() via state change under unlucky error conditions, and
then try to hold the data lock again.
Break the recursion loop explicitly checking for the exceptional
condition.
Add a new flag instead of using an existing one like 'closing', to exit
early in subflow_state_change(), and explicitly flush the RX queue at
reset time.
This avoids unneeded processing to check for available data -- calling
get_mapping_status() and more on a dying subflow -- bu
mptcp: close race between scheduler and state change
In the Linux kernel, the following vulnerability has been resolved:
mptcp: close race between scheduler and state change
The mptcp scheduler may race with subflow sockets state change: data
transmission on the selected socket may fail and a later release could
try to use mss_now reset to 0 for a divide operation.
Address the issue by explicitly checking for the critical scenario.
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
If __subflow_push_pending() errors out we should avoid updating the
copied byte counters, to avoid mismatch push call later on.
In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix quota init duplicate scan
gfs2_quota_init() checks for duplicate quota_change IDs while holding
qd_lock and the quota hash bucket bitlock. That path used
gfs2_qd_search_bucket(), which takes a lockref reference via
lockref_get_not_dead().
On PREEMPT_RT this may sleep, which is not allowed under the bucket
bitlock, triggering "sleeping function called from invalid context".
Use a no-ref bucket lookup in this path, then continue duplicate
handling without taking a lockref there.
Refactor gfs2_qd_search_bucket() to build on top of the no-ref helper
so lookup trave
In the Linux kernel, the following vulnerability has been resolved:
gfs2: move quota_init qc iterator increment
Move qc++ from the loop body into the for-loop increment
expression in gfs2_quota_init().
This keeps iterator progression explicit and avoids mixing pointer
advance with duplicate-slot handling in the loop body.
wifi: cfg80211: reject duplicate wiphy cipher suite entries
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject duplicate wiphy cipher suite entries
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place an
wifi: nl80211: reject beacons with bad HE operation
In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject beacons with bad HE operation
The HE operation element not only needs to be longer than
the fixed part, but also have an appropriate size for the
variable part inside of it. Check this.
wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result()
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result()
It was recently reported that rtw_fw_adaptivity_result()
in fw.c dereferences rtwdev->chip->edcca_th without
a NULL check. The issue is that devices with the
8821CE chip don't define edcca_th in their chip
info. As a result, when rtw_fw_adaptivity_result()
tries to dereference it, the kernel triggers an oops.
Add a NULL check for edcca_th before dereferencing
it in rtw_fw_adaptivity_result() in fw.c. Placing
the check at the function entry avoids logging any
garbage values.
This change does not a