In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: allocate dummy netdev sooner
The RX rings and the shared NAPI are carried by an internal "dummy" netdev
(eth->dummy_dev). mtk_probe() creates that dummy device, and adds the
shared tx/rx NAPI to it, only after the MAC netdevs have been registered.
That order has been there since the MT7623 support was added and leaves a
window in which the netdevs are visible to the network core before the
shared NAPI and the dummy device exist.
If anything brings the first netdev up during that window (e.g. netifd
opening the WAN link the instant the interface
In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: skip ptp deinit if init was skipped
sparx5_ptp_init() returns early on the base lan969x variants
because they do not have the SPX5_FEATURE_PTP flag. It also returns early
when no "ptp" interrupt is described. Unbinding the driver then causes a
NULL pointer dereference when cleaning up uninitialized tx_skbs queues:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
Call trace:
skb_queue_purge_reason+0x68/0x120 (P)
sparx5_ptp_deinit+0x64/0xc0
mchp_sparx5_remove+0x38/0x70
platform_remove+0x20/0x30
ipvs: filter some flags received in the backup server
In the Linux kernel, the following vulnerability has been resolved:
ipvs: filter some flags received in the backup server
While the IPVS SYNC protocol is not secure by design
we can still protect the backup server from messages that
can wreak havoc.
This commit addresses problems from received connection flags
or their combinations. We now drop messages as follows:
1. the NO_CPORT+TEMPLATE combination allows lookups for normal
connections to hit template which can break in many ways.
While the master does not sync connections with NO_CPORT flag,
i.e. before they are established, we still accept NO_CPORT
without TEMPLATE.
2. ONE_PACKET: i
In the Linux kernel, the following vulnerability has been resolved:
netfilter: bpf: reject invalid NAT manipulation types
As bpf_ct_set_nat_info() is not validating the NAT manipulation type a
wrong value can be passed directly to nf_nat_setup_info(). This triggers
the WARN_ON() at nf_nat_setup_info() and if panic_on_warn isn't set,
then IPS_SRC_NAT_DONE is set without adding nat_bysource and conntrack
cleanup tries to unlink an uninitialized hlist node.
Fix this by checking that NAT manipulation type is correct before
calling nf_nat_setup_info(). In addition, if the WARN_ON is hit, return
NF_DROP instead of continuing with the processing
netfilter: flowtable: generalize pending status bit
In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: generalize pending status bit
Rename NF_FLOW_HW_PENDING to NF_FLOW_PENDING and use it to inhibit the
flowtable GC worker until pending hw offload work has been completed.
Apparently, nf_flow_offload_stats() can schedule work to retrieve stats
while the flow is being removed by GC.
And this bit can also be used in a follow up patch to disable GC until
the flow has been fully added in both directions.
Revert the reordering done in commit d644b23afe1e ("netfilter:
flowtable: publish HW_DEAD after worker is done") to prevent a race
between GC and hw off
perf: Fix race between perf_event_exit_task() and perf_pending_task()
In the Linux kernel, the following vulnerability has been resolved:
perf: Fix race between perf_event_exit_task() and perf_pending_task()
A race condition exists between perf_event_exit_task() and
perf_pending_task() during begin_new_exec().
During begin_new_exec(), perf_event_exit_task() may be called, and the
PF_EXITING flag is not set on task. So perf_sigtrap() continues to execute
and triggers WARN_ON_ONCE(event->ctx->task != current).
Since both task exit and exec paths can call perf_event_exit_task() which
sets ctx->task to TASK_TOMBSTONE, fix this by explicitly checking if
event->ctx->task equals TASK_TOMBSTONE and dropping the red
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix objects stuck in free_by_rcu_ttrace
do_call_rcu_ttrace() returns early when call_rcu_ttrace_in_progress is set
and leaves the objects in free_by_rcu_ttrace. __free_rcu() frees
waiting_for_gp_ttrace only and clears the flag. Hence the objects that
free_bulk() or __free_by_rcu() added while RCU tasks trace GP was in flight
stay in free_by_rcu_ttrace until free_bulk() or alloc_bulk() is called for
the same bpf_mem_cache again, which may never happen. The number of such
objects is not bounded.
Turn call_rcu_ttrace_in_progress into three states:
0 - idle
1 - __free_rcu
drm/amd/display: guard dc_sink dereferences in MST mode validation
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: guard dc_sink dereferences in MST mode validation
dm_dp_mst_is_port_support_mode() reads
aconnector->dc_sink->dsc_caps... for the DSC branch-throughput check,
and get_conv_frl_bw()'s HDMI-PCON FRL-bandwidth path reads
aconnector->dc_sink->edid_caps.max_frl_rate, both without a NULL
check. dc_sink is cleared asynchronously on MST unplug, and both
functions run from paths that the driver's own comments document as
racing that teardown: the connector probe worker's ->mode_valid
callback and a compositor's atomic check, neither of which holds the
MST manager lo
drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend
dc_state_create_copy() can return NULL on allocation failure.
dm_suspend() only conditionally skips dm_gpureset_toggle_interrupts()
and continues execution, returning success. dm_resume() then
dereferences the NULL cached_dc_state in link_enc_cfg_copy() and the
following dc_state->stream_count loop, crashing during GPU reset
recovery.
Return -ENOMEM immediately if the copy fails, so the caller aborts
suspend instead of leaving a NULL cached state for resume.
(cherry picked from commit 84b6d7932fdd285779
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: fix firmware leak on teardown
The firmware requested in gfx_v6_0_init_microcode() is not released
when the GFX block is torn down, leaking the firmware resources.
Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini()
to release the PFP, ME, CE and RLC firmware.
(cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924)
drm/amdgpu: fix IP instance memory leak on kobject add failure
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix IP instance memory leak on kobject add failure
amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with
kzalloc_flex() and initializes its embedded kobject before calling
kobject_add().
If kobject_add() fails, the return value is ignored and execution
continues without dropping the initial kobject reference. The failed
kobject is not retained in the kset list, so the normal sysfs teardown
path cannot find it. As a result, ip_hw_instance_release() is never
called and the ip_hw_instance allocation is leaked.
Call kobject_put() when kobject_add() fails so t
drm/amdgpu: fix ACP MFD device leak on init failure
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before
attaching them to the ACP power domain and initializing the hardware.
If attaching a child to the power domain fails, or if the ACP reset or
clock enable operation times out, the failure path frees only the
source cell, resource, and platform-data allocations. The child
platform devices already registered by mfd_add_devices() remain
registered and are never released.
Remove the children from the power domain and unregister the MFD
devices on failures
binder: fix is_failure flag for superseded transaction cleanup
In the Linux kernel, the following vulnerability has been resolved:
binder: fix is_failure flag for superseded transaction cleanup
When a TF_UPDATE_TXN transaction supersedes a pending async transaction,
binder_release_entire_buffer() is called with is_failure=false. Since the
superseded transaction was never delivered, binder_apply_fd_fixups() was
never called and no fds were installed in the target process.
With is_failure=false, the BINDER_TYPE_FDA cleanup handler interprets
stale buffer contents as installed fd numbers and passes them to
binder_deferred_fd_close(), closing unrelated file descriptors.
Pass is_failure=true since the tra
binder: fix leaked fd fixups on TF_UPDATE_TXN supersede
In the Linux kernel, the following vulnerability has been resolved:
binder: fix leaked fd fixups on TF_UPDATE_TXN supersede
When a TF_UPDATE_TXN transaction supersedes a pending async transaction
in a frozen process, the outdated transaction is freed with kfree()
directly. This skips binder_free_txn_fixups(), leaking all
binder_txn_fd_fixup entries and their fget()'d struct file references.
The leaked file refcounts never reach zero, so the struct file objects
are permanently pinned in memory. They survive process exit and
accumulate across invocations until file-max exhaustion.
Every other transaction cleanup path (binder_free_transactio
nitro_enclaves: fix use-after-free on SLOT_ALLOC failure
In the Linux kernel, the following vulnerability has been resolved:
nitro_enclaves: fix use-after-free on SLOT_ALLOC failure
When ne_create_vm_ioctl() fails the SLOT_ALLOC request after
anon_inode_getfile() has succeeded, the error path calls
fput(enclave_file) and then frees ne_enclave.
In normal userspace context, fput() defers the final __fput() via
task_work. ne_enclave_release() therefore runs after ne_enclave has
already been freed and dereferences ne_enclave->slot_uid, causing a
use-after-free: KASAN: slab-use-after-free in ne_enclave_release.
The enclave has no slot allocated and is not yet linked into the
enclaves list on this er
USB: cdc-acm: skip URB restart in port_shutdown if disconnected
In the Linux kernel, the following vulnerability has been resolved:
USB: cdc-acm: skip URB restart in port_shutdown if disconnected
acm_port_shutdown() is called from the tty-port machinery whenever the
last user closes the port. acm_disconnect() sets acm->disconnected and
calls tty_port_tty_vhangup(), which eventually triggers port_shutdown().
At that point acm_disconnect() has already called acm_poison_urbs() and
is about to free the control and read URBs.
However, acm_port_shutdown() unconditionally calls acm_unpoison_urbs()
and, when the ALWAYS_POLL_CTRL quirk is set, immediately re-submits the
ctrlurb and all read URBs. If the concu
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix port tear down use-after-free
Some drivers for multiport devices access port driver data from
completion handlers of shared URBs submitted at attach() or first open()
and stopped at disconnect() or last close(), respectively.
A simple NULL check before accessing the driver data makes sure that a
port state container has at least been allocated, but a completion
handler can still race with port tear down.
Reorder the disconnect handling so that ports are not deregistered (and
their driver data freed) until after all ports have been hung up and the
driver d
usb: storage: sierra_ms: reject short SWoC info transfers
In the Linux kernel, the following vulnerability has been resolved:
usb: storage: sierra_ms: reject short SWoC info transfers
sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes
from the device via usb_control_msg(), but its callers only treat a
negative return value as failure. A device that answers the
vendor-specific GetSwocInfo request with a short IN transfer is
therefore accepted, leaving the tail of the freshly allocated
(kmalloc(), non-zeroing) swoc_info buffer uninitialized.
truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU
and swocInfo->LinuxVer from that buffer into the world-readable
(0444) "t
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
generic_set_cmd() and generic_get_cmd() use the low nibble of
ctrl->bRequest as an index into con->data[]:
u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */
...
con->data[cmd] = value; /* OOB when cmd >= 5 */
struct usb_audio_control (include/linux/usb/audio.h) declares data as
a 5-element array, so indices 5 through 15 write (or read) up to 44
bytes past the end of the array on the heap.
A malicious USB host can craft a class-specific SET_CUR / GET_CUR
request with an arbi
usb: typec: anx7411 - stop the IRQ before destroying the workqueue
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: anx7411 - stop the IRQ before destroying the workqueue
The IRQ is devm-managed, so it can still queue plat->work while
remove() is tearing the queue down. Disable it first.