KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path
In sev_dbg_crypt(), the per-iteration transfer length is bounded by
the source page offset (PAGE_SIZE - s_off) but not by the destination
page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt
path (__sev_dbg_encrypt_user) performs a read-modify-write using a
single-page intermediate buffer (dst_tpage):
1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16)
before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE,
the PSP writes beyond the end of the 4096-b
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_mod
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
When fbcon_do_set_font() fails (e.g., due to a memory allocation failure
inside vc_resize() under heavy memory pressure), it jumps to the `err_out`
label to roll back the console state. However, the current rollback logic
forgets to restore the `hi_font` state, leading to a severe state machine
corruption.
Earlier in the function, `set_vc_hi_font()` might be called to change
`vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()`
subsequently fails, the `err_out` path restores `vc_font.char
In the Linux kernel, the following vulnerability has been resolved:
fbdev: omap2: fix use-after-free in omapfb_mmap
omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that
can lead to use-after-free:
The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock),
while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock.
This allows concurrent execution.
In omapfb_mmap():
1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref
2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region
3. len = fix->smem_len; // Read from NEW region
4. vm_iomap_mem
In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter registration race
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration.
In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slo
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix SECINFO_NO_NAME decode error cleanup
nfsd4_decode_secinfo_no_name() currently initializes sin_exp after
decoding sin_style. If the XDR stream is truncated, the decoder returns
nfserr_bad_xdr before sin_exp is initialized.
Since commit 3fdc54646234 ("NFSD: Reduce amount of struct
nfsd4_compoundargs that needs clearing"), the inline iops array is not
cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore
leave sin_exp holding stale union contents from a previous operation.
The error response path still invokes nfsd4_secinfo_no_name_release(),
whi
In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix posix_acl leak on SETACL decode failure
nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each
call nfs_stream_decode_acl() twice, first for NFS_ACL and then for
NFS_DFACL. Each successful call transfers ownership of a freshly
allocated posix_acl into argp->acl_access or argp->acl_default. If
the first call succeeds but the second fails, the decoder returns
false and argp->acl_access is left dangling.
ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and
ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle.
Both only call fh
nfsd: reset write verifier on deferred writeback errors
In the Linux kernel, the following vulnerability has been resolved:
nfsd: reset write verifier on deferred writeback errors
nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to
detect deferred writeback errors, but neither rotates the server's write
verifier (nn->writeverf) when this check fails. Every other
durable-storage-failure path in these functions calls
commit_reset_write_verifier() before returning an error.
The missing rotation means clients holding UNSTABLE write data under the
current verifier will COMMIT, receive the unchanged verifier back, and
conclude their data is durable — silently dropping data that fai
NFSv4/flexfiles: reject zero filehandle version count
In the Linux kernel, the following vulnerability has been resolved:
NFSv4/flexfiles: reject zero filehandle version count
ff_layout_alloc_lseg() decodes the filehandle-version array count
from the flexfiles layout body. The value is used as the count for
kzalloc_objs(), and the current code only rejects NULL.
A zero count yields ZERO_SIZE_PTR, which can be stored in
dss_info->fh_versions even though later flexfiles paths assume that at
least one filehandle version exists.
Reject fh_count == 0 before the allocation, matching the existing zero
version_count validation in the flexfiles GETDEVICEINFO parser.
A QEMU/KASAN run with a malformed
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a
netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately
calls strrchr(buf, '.') to locate the port separator. Both decodes
use xdr_stream_decode_string_dup(), and the current code checks only
"nlen < 0" / "rlen < 0" before dereferencing the returned string.
When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline()
returns 0 and xdr_stream_decode_string_dup() falls through to its
"*str = NULL; return ret" tail, leavi
ksmbd: fix out-of-bounds read in smb_check_perm_dacl()
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds read in smb_check_perm_dacl()
The permission-check ACE walk in smb_check_perm_dacl() validates the ACE
header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it
never checks that ace->size is actually large enough to contain
num_subauth sub-authorities before compare_sids() dereferences them.
CIFS_SID_BASE_SIZE covers the SID header up to but excluding the
sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header,
so the existing guards only guarantee the 8-byte SID base, i.e. zero
sub-authorities. compare_sids() then read
fuse: re-lock request before replacing page cache folio
In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before replacing page cache folio
fuse_try_move_folio() unlocks the request on entry but does not
re-lock it on the success path. This means fuse_chan_abort() can end the
request and free the fuse_io_args (eg fuse_readpages_end()) while the
subsequent copy chain logic after fuse_try_move_folio() accesses the
fuse_io_args, leading to use-after-free issues.
Fix this by calling lock_request() before replace_page_cache_folio().
This ensures the request is locked on the success path which will
prevent the fuse_io_args from being freed while the later copyi
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
In the Linux kernel, the following vulnerability has been resolved:
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
A KASAN null-ptr-deref was observed in vcs_notifier():
BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130
Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {}
The issue is a race condition in vcs_write(). When the console_lock is
temporarily dropped (to copy data from userspace), the vc_data pointer
obtained from vcs_vc() may become stale. After re-acquiring the lock,
vcs_vc() is called again to re-validate the pointer. If the vc has been
deallocated in the meantime, vcs_vc() re
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
dw8250_probe() registers the 8250 port via serial8250_register_8250_port()
and then, if the device has a clock, registers a clock notifier. If
clk_notifier_register() fails, probe returns the error but leaves the
8250 port registered. The matching serial8250_unregister_port() lives
in dw8250_remove(), which is not called when probe fails, so the port
slot stays occupied until the device is rebound or the system is
rebooted. The devm-allocated driver data is freed while the port still
references it (via t
ksmbd: reject non-VALID session in compound request branch
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject non-VALID session in compound request branch
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; t
media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si
In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si
syzbot reported a general protection fault in
vidtv_psi_ts_psi_write_into [1].
vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does
not check for this before dereferencing the returned pointer to access
the continuity counter. This leads to a general protection fault when
accessing a near-NULL address.
The root cause is that vidtv_mux_pid_ctx_init() does not check the
return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs.
If the allocation fails, the PID context is never create
In the Linux kernel, the following vulnerability has been resolved:
virtiofs: fix UAF on submount umount
iput() called from fuse_release_end() can Oops if the super block has
already been destroyed. Normally this is prevented by waiting for
num_waiting to go down to zero before commencing with super block shutdown.
This only works, however, for the last submount instance, as the wait
counter is per connection, not per superblock.
Revert to using synchronous release requests for the auto_submounts case,
which is virtiofs only at this time.
media: i2c: ov8856: free control handler on error in ov8856_init_controls()
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov8856: free control handler on error in ov8856_init_controls()
The control handler wasn't freed if adding controls failed, add an error
exit label and convert the existing error return to use it.
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checki