HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before h
In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: bound device-supplied profile index
kone_keep_values_up_to_date() and kone_profile_activated() use an
8-bit, device-supplied profile value as an index into the 5-element
kone->profiles[] array without a range check. A malicious USB device
claiming the Roccat Kone id can send a switch-profile event (or a
startup_profile read at probe) with an out-of-range value and make the
driver read out of bounds; the result is exposed via the actual_dpi
sysfs attribute.
Reject out-of-range indices in both paths.
This was found with static analysis and confirmed with the KU
cxl/mbox: Clamp mailbox output allocation to the payload size
In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Clamp mailbox output allocation to the payload size
CXL_MEM_SEND_COMMAND bounds the user's in.size to the mailbox payload
size but leaves out.size unbounded, then cxl_mbox_cmd_ctor() calls
kvzalloc(out.size). A large out.size drives a huge allocation, above
INT_MAX it WARNs and taints, and with panic_on_warn=1 it panics.
The transport __cxl_pci_mbox_send_cmd() already clamps the response copy
to min(out.size, payload_size, device len), so the output buffer is
never written beyond payload_size. Clamp the allocation to payload_size
too, matching the RAW path.
In the Linux kernel, the following vulnerability has been resolved:
ASoC: rt700-sdw: always drain jack work on remove
rt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only
when rt700->hw_init is true. That state bit is cleared by
rt700_update_status() when the SoundWire slave becomes UNATTACHED, but a
jack work item can already have been queued by rt700_interrupt_callback()
or rt700_jack_init() while the device was initialized.
Do not use hw_init as the remove-time guard for draining these work
objects. The delayed works are initialized during rt700_init(), so remove
can cancel them unconditionally and pair the object lif
ASoC: fsl_audmix: rework runtime PM handling in probe
In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_audmix: rework runtime PM handling in probe
After pm_runtime_enable() the AUDMIX block is powered off and stays
suspended until the first runtime resume. Register writes issued between
probe() and the first resume (e.g. from DAPM or ALSA control paths)
target unpowered hardware and cause a system hang.
Fix this by calling pm_runtime_resume_and_get() immediately after
pm_runtime_enable() to power the hardware up and enable its clocks.
Release the reference afterwards with pm_runtime_put() to allow the
runtime PM framework to suspend the device and switch the regma
drm/lima: call drm_mm_init() with a valid allocation range
In the Linux kernel, the following vulnerability has been resolved:
drm/lima: call drm_mm_init() with a valid allocation range
lima_vm_create() is currently run before va_start and va_end are set up,
meaning they are both 0. lima_vm_create() runs drm_mm_init() with them
as arguments for the allocator, and if DRM_DEBUG_MM is enabled the
DRM_MM_BUG_ON check in drm_mm_init then fires, as seen here on
exynos4412-odroid-u2:
[ 1.736297] ------------[ cut here ]------------
[ 1.740370] kernel BUG at drivers/gpu/drm/drm_mm.c:931!
[ 1.745574] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 1.750697] Modules linked in:
[ 1.753734] CPU: 0
sched/fair: Fix overflow in update_tg_cfs_runnable()
In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix overflow in update_tg_cfs_runnable()
A divide-by-zero crash is observed when running hackbench:
[14697.488452] CPU: 112 UID: 0 PID: 124791 Comm: hackbench Not tainted 7.1.0-rc2+
[14697.492627] RIP: 0010:propagate_entity_load_avg+0x35f/0x3e0
[14697.506799] <TASK>
[14697.507411] __dequeue_task+0x2b4/0xc70
[14697.508677] dequeue_task_fair+0x36/0x370
[14697.509047] dequeue_task+0x101/0x2f0
[14697.509426] __schedule+0x1b1/0x1a00
[14697.510868] anon_pipe_read+0x3da/0x450
[14697.511400] vfs_read+0x361/0x390
[14697.512053] __x6
drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table.
drm/amdgpu/pm/powerplay: bounds-check voltage index in SMU7 lookup
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in SMU7 lookup
vddInd and vddcInd fields from VBIOS-parsed tables are used to index into
voltage lookup tables without a bounds check. Return -EINVAL when any
index is out of range.
drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup
vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc,
vddci and vddmem lookup tables without bounds checks across nine sites.
Return -EINVAL when any index is out of range.
drm/amd/display: Fix dangling pointer in plane reset function
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in plane reset function
amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next]
drm/amd/display: Fix dangling pointer in CRTC reset function
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next]
bpf: Copy per-CPU map value padding in copy_map_value_long()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Copy per-CPU map value padding in copy_map_value_long()
In kernel, per-CPU map elements are stored with
round_up(map->value_size, 8) bytes. On UAPI lookup paths, it copies the
rounded size for each CPU into a temporary buffer.
However, copy_map_value_long() passes 'map->value_size' to
bpf_obj_memcpy(). When the map has special fields, bpf_obj_memcpy() copies
around those fields with memcpy(), and does not copy the tail padding
between 'map->value_size' and round_up(map->value_size, 8).
The temporary UAPI lookup buffers are allocated without __GFP_ZERO. As a
result, w
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
We miss a failed allocation check for pgdat->per_cpu_nodestats, which
results in a NULL deref when we offset into the per-cpu area.
Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing
at boot_nodestats so a later online can retry the allocation.
hotadd_init_pgdat() returns NULL on failure, which __try_online_node()
already maps to -ENOMEM.
On failure nothing needs to be unwound:
- the node is never marked online
- per_cpu_nodestats is left pointing at boot_nodestats
- __add_memor
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still conta
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very l
In the Linux kernel, the following vulnerability has been resolved:
csky: Fix a4/a5 restoration in syscall trace path
The syscall trace path reloads syscall arguments from pt_regs before
calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall
arguments are prepared as stack arguments before invoking syscallid.
The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since
those offsets are relative to the original pt_regs base, loading them
after changing sp fetches the wrong slots. As a result, traced syscalls
that use the 5th or 6th argument may receive corrupted arguments.
This is visible with mmap2(), which takes
platform/chrome: sensorhub: Fix memory overread in ring handler
In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Fix memory overread in ring handler
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev->max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg
In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - fix rng list on registration error
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step.
In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - clear AES key schedule from stack
qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack.
That schedule contains key material and can remain in the stack frame.
Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy.