p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux · Page n° 80

Vulnérabilités publiées pour linux au cours des 30 derniers jours : 670. Présentes dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 15186

  1. CVE-2026-89773

    Moyenne · CVSS 5.7EPSS 0,2%Aucun correctif publié

    drm/amd/display: Skip Update HDCP Config In Transition State

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Update HDCP Config In Transition State Transition state does not have a valid dm_stream_ctx that should skip configuring HDCP routine. The routine is valid to go through only when a valid stream is created.

    Publication Mise à jour
  2. CVE-2026-89765

    Non évaluéeEPSS 0,2%Correctif disponible

    timers/itimer: Zero-init old itimerval before copy to userspace

    In the Linux kernel, the following vulnerability has been resolved: timers/itimer: Zero-init old itimerval before copy to userspace On native sparc64, struct __kernel_old_timeval contains a four-byte hole after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit. put_itimerval() fills only the named fields in a stack-allocated __kernel_old_itimerval and copies the entire object to userspace, so getitimer() can expose the two padding holes. Zero-initialize the aggregate before assigning the fields so implicit padding is deterministic before it crosses the user/kernel boundary.

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  3. CVE-2026-89763

    Élevée · CVSS 7.8EPSS 0,12%Aucun correctif publié

    KEYS: trusted: Fix TPM teardown ordering

    In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix TPM teardown ordering trusted_tpm_exit() drops the TPM chip reference and frees the digest array before unregistering the trusted key type. key_type_lookup() holds key_types_sem for reading until the key operation finishes, while unregister_key_type() takes it for writing. It therefore provides the synchronization point that must precede backend teardown. The current order permits this interleaving: CPU 0 CPU 1 trusted_tpm_exit() key_type_lookup("trusted") put_device(&chip->dev) trusted_tp

    Publication Mise à jour
  4. CVE-2026-89762

    Élevée · CVSS 7.8EPSS 0,12%Aucun correctif publié

    apparmor: fix cred UAF caused by begin_current_label_crit_section()

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix cred UAF caused by begin_current_label_crit_section() AppArmor's begin_current_label_crit_section() is a scary function called from lots of LSM hooks (in particular VFS/socket-related ones) that checks if the label referenced by the current creds is marked FLAG_STALE, and if so, attempts to use aa_replace_current_label() to replace the creds with an updated version that uses a new label. The first problem with this is that it would directly lead to UAF of `struct cred` if anything in the kernel takes a pointer to the current creds and accesses these past a se

    Publication Mise à jour
  5. CVE-2026-89761

    Élevée · CVSS 7.8EPSS 0,12%Aucun correctif publié

    apparmor: fix out-of-bounds write when null terminating a label vec

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix out-of-bounds write when null terminating a label vec aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE is passed. If the components are all distinct no duplicates are dropped, dups is 0 and the terminator goes to vec[n], so the caller has to provide room for n + 1 entries. aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len, gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES it uses the local array of LOCAL_VEC_ENTRIES poi

    Publication Mise à jour
  6. CVE-2026-89759

    Moyenne · CVSS 5.7EPSS 0,2%Aucun correctif publié

    mm/kmemleak: avoid soft lockup when scanning task stacks

    In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid soft lockup when scanning task stacks Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3. kmemleak_scan() scans every task stack under one rcu_read_lock() with no reschedule point, which can trip the soft lockup watchdog on hosts with very many threads. That prints the following message, depending on the workload+host configuration: watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537] scan_block kmemleak_scan kmemleak_scan_thread kthread Patch 1 walks the tasks with find_ge_pid() so the

    Publication Mise à jour
  7. CVE-2026-89757

    Moyenne · CVSS 5.8EPSS 0,21%Aucun correctif publié

    mm/mglru: fix and remove redundant unevictable folio handling

    In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix and remove redundant unevictable folio handling sort_folio() has a shortcut for moving folios that are no longer evictable but are still sitting on a generation list. However, this shortcut is buggy. It does not follow the PG_lru usage convention, and it has a more serious issue. Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that folio->lru can be reused to hold folio->mlock_count (see the comment in lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them, and every other place that turns a folio unevictable initialises m

    Publication Mise à jour
  8. CVE-2026-89756

    Faible · CVSS 2EPSS 0,2%Correctif disponible

    mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()

    In the Linux kernel, the following vulnerability has been resolved: mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch() migrate_pages_batch() unmaps each folio before moving it, and every unmap runs the mmu_notifier invalidate callbacks. On KVM hosts try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() -> tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps the CPU busy for a long time. The loop already calls cond_resched(), but on PREEMPTION kernels that is a no-op, and involuntary preemption is not a Tasks-RCU quiescent state. A long batch therefore never reports a quiescent stat

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  9. CVE-2026-89753

    Non évaluéeEPSS 0,18%Correctif disponible

    mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()

    In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec() I am seeing some rcu_tasks stalls in the Meta fleet during reclaim. INFO: rcu_tasks detected stalls on tasks: 0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8 task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552 Call Trace: shrink_lruvec mem_cgroup_iter shrink_node do_try_to_free_pages try_to_free_pages __alloc_frozen_pages_noprof alloc_pages_noprof pte_alloc_one __pte_alloc handle_mm_fault Nothing promises direct reclaim returns in bounded ti

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  10. CVE-2026-89752

    Non évaluéeEPSS 0,18%Correctif disponible

    mm: memcg: stop reclaim when a limit update is superseded

    In the Linux kernel, the following vulnerability has been resolved: mm: memcg: stop reclaim when a limit update is superseded kernfs serializes file operations only per open file, so separate open files can update the same memory.high or memory.max file concurrently. Both handlers store the new limit before synchronous reclaim, but continue to use the writer's local target in the reclaim loop. If another writer raises or removes the limit, the first writer can continue reclaiming toward a stale target. For memory.max, this can leave the writer looping indefinitely once reclaim retries are exhausted. The OOM path sees sufficient margin u

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  11. CVE-2026-89751

    Non évaluéeEPSS 0,17%Correctif disponible

    x86/tdx: Fix off-by-one in port I/O handling

    In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix off-by-one in port I/O handling handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use: u64 mask = GENMASK(BITS_PER_BYTE * size, 0); GENMASK(h, l) includes bit h. For size=1 (INB), this produces GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8 bits). The mask is one bit too wide for all I/O sizes. Fix the mask calculation.

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  12. CVE-2026-89749

    Non évaluéeEPSS 0,22%Correctif disponible

    tracing: Fix crash passing ERR_PTR to kthread_stop()

    In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching th

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  13. CVE-2026-89746

    Élevée · CVSS 7.8EPSS 0,16%Correctif disponible

    tracing: Fix use-after-free with same-name named triggers

    In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry,

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  14. CVE-2026-89744

    Élevée · CVSS 8.4EPSS 0,14%Correctif disponible

    device property: fix infinite loop in fwnode_for_each_child_node()

    In the Linux kernel, the following vulnerability has been resolved: device property: fix infinite loop in fwnode_for_each_child_node() When iterate over children of a fwnode that has a secondary fwnode, fwnode_get_next_child_node() can enter an infinite loop if the secondary fwnode has more than one child. Parent Child (Primary fwnode) FWa: {FWa1, FWa2, FWa3} (Secondary fwnode) FWb: {FWb1, FWb2} In this case: ┌─> fwnode_get_next_child_node(FWa, FWa1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2 │ │ ... │ │ fwnode_get_next_child_node(FWa, FWa3) │ - fwn

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  15. CVE-2026-89742

    Élevée · CVSS 7.8EPSS 0,16%Correctif disponible

    rapidio: mport_cdev: fix use-after-free in dma_req_free()

    In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_mutex through req->map, drops the mapping reference with kref_put(), and then dereferences req->map again to unlock the mutex. If kref_put() drops the last reference, mport_release_mapping() frees the mapping, and the subsequent mutex_unlock() dereferences a freed object. This is a use-after-free. Fix this by caching map and md before kref_put(), clearing req->map while holding buf_mutex, and using the cached md for mutex unlocking. The bug is reachable from userspace via the RapidIO m

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  16. CVE-2026-89741

    Élevée · CVSS 7.8EPSS 0,17%Correctif disponible

    Revert "media: v4l2-dev: fix error handling in __video_register_device()"

    In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a. The intentions of that patch were good, but it doesn't work. The idea is that if device_register fails, you have to do a put_device to let the ref counter release resources. However, the V4L2 API says that if video_register_device() fails, then you have to call video_device_release(), which kfree()s the video_device struct. But the put_device() will already have freed the struct, so you end up in a double-free scenario. There is not re

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  17. CVE-2026-89740

    Non évaluéeEPSS 0,21%Aucun correctif publié

    serial: imx: serialize imx_uart_ports[] lifetime

    In the Linux kernel, the following vulnerability has been resolved: serial: imx: serialize imx_uart_ports[] lifetime imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[] before uart_add_one_port() because console setup uses the table. The entry is not cleared when adding the port fails or after removal, leaving a dangling pointer. A sibling probe can register the shared console through that stale entry. This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a sibling UART, unbinding the console UART and rebinding the sibling. Keep the entry valid through uart_remove_one_port(), then clear it. Protect port addi

    Publication Mise à jour
  18. CVE-2026-89738

    Élevée · CVSS 7.8EPSS 0,19%Aucun correctif publié

    usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via mod_timer(). Both recover the same udc through container_of and dereference it on every iteration. Neither teardown path cancels this cycle. udc is devm-allocated, so it is freed after at91udc_remove() returns, and is likewise freed when probe fails and devres runs. A timer callback or wo

    Publication Mise à jour
  19. CVE-2026-89736

    Élevée · CVSS 7.8EPSS 0,13%Correctif disponible

    usb: gadget: u_audio: Fix use-after-free on sound card disconnect

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound card teardown and immediately frees the underlying struct snd_uac_chip context. However, snd_card_free_when_closed() returns asynchronously while ALSA control elements (kctls) remain open in userspace. When userspace control applications access or close these open file descriptors, kctl callbacks attempt to dereference kctl->private_data pointing to &uac->c_prm or &uac->p_prm within the freed uac structure, resulting in a use-after-free

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour
  20. CVE-2026-89733

    Élevée · CVSS 7.8EPSS 0,17%Correctif disponible

    usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind() In uvc_function_bind() error path, we use usb_ep_free_request which uses uvc->control_req but does not set it to NULL afterwards. Thus, uvc->control_req is a dangling pointer causing a UAF. Also we do not set the uvc->control_buf pointer to NULL after freeing it, which is another dangling pointer. Fix it by setting uvc->control_req to NULL after we run usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the same for uvc_function_unbind().

    • Mettez à jour vers 6.1.190-1
    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →