Vulnérabilités de linux · Page n° 65

i2c: smbus: reject oversized block transfers in the common path

In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: reject oversized block transfers in the common path The SMBus block transfer length data->block[0] is validated in i2c_smbus_xfer_emulated() but that check runs too late for tracepoints and is skipped entirely when the adapter provides a native smbus_xfer implementation. This allows user-controlled oversized block lengths to reach tracepoint memcpy calls and driver callbacks unchecked. Add an early validation in __i2c_smbus_xfer() that rejects block transfers whose caller-supplied length is zero or exceeds I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driv

• Mettez à jour vers 6.12.111-1

net: appletalk: fix NULL pointer dereference in aarp_send_ddp()

In the Linux kernel, the following vulnerability has been resolved: net: appletalk: fix NULL pointer dereference in aarp_send_ddp() aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast path without checking for NULL. When the device has no AppleTalk interface configured (dev->atalk_ptr == NULL), this leads to a NULL pointer dereference at the at->s_net access. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:aarp_send_ddp (net/appletalk/aarp.c:552 (discriminator 2)) Call Trace: <TASK> atalk_sendmsg (net/appletalk/ddp.c:1715) __sys_sendto (net/socket.c:2265 (discriminator 1)) __x64_

• Mettez à jour vers 6.12.111-1

f2fs: embed f2fs_gc_kthread in f2fs_sb_info

In the Linux kernel, the following vulnerability has been resolved: f2fs: embed f2fs_gc_kthread in f2fs_sb_info Instead of allocating f2fs_gc_kthread dynamically, embed it in f2fs_sb_info. This simplifies lifetime management and prepares for fixing race conditions during teardown. - __sbi_store - remount|shutdown - f2fs_stop_gc_thread - access sbi->gc_thread - sbi->gc_thread = NULL - access sbi->gc_thread->f2fs_gc_task

• Mettez à jour vers 6.12.113-1

i3c: master: Fix device_register() error path

In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix device_register() error path When device_register() fails in i3c_master_register_new_i3c_devs(), put_device() is called to drop the reference taken by device_register(). That drops the last reference, so the device's release callback i3c_device_release() runs and frees the i3c_device. Two problems follow from that: i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because desc->dev->desc still points back at the descriptor. Clear it before calling put_device(). After put_device() frees the i3c_device, desc->dev is left pointing at freed memo

• Mettez à jour vers 6.12.111-1

ksmbd: fix maximum allowed access checks

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix maximum allowed access checks The DACL permission check looks for an ACE matching the current user and falls back to the Everyone ACE. It does not consider an Authenticated Users ACE, even though an authenticated session is a member of that well-known group. As a result, opening a file whose access is granted through S-1-5-11 can incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users ACE as a fallback entry alongside Everyone. The maximal access calculation also combines access masks from every ACE, regardless of whether its SID applies to the

wifi: rtw89: fix HE extended capability length check

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix HE extended capability length check rtw89_mac_check_he_obss_narrow_bw_ru_iter() reads extended capability byte 10, but rejects only datalen values below 10. Byte 10 requires at least 11 bytes. Require datalen >= 11 before reading data[10].

• Mettez à jour vers 6.12.111-1

greybus: audio: bound the topology section sizes against the fetched size

In the Linux kernel, the following vulnerability has been resolved: greybus: audio: bound the topology section sizes against the fetched size gb_audio_gb_get_topology() fetches a topology blob of a module-supplied size, and gbaudio_tplg_parse_data() then walks it by adding the module-supplied size_dais, size_controls and size_widgets fields to form the control, widget and route section offsets. Those le32 sizes are never checked against the fetched blob, so a module reporting a small topology size but large section sizes makes the offsets point past the allocation, and parsing reads out of bounds. Reject a topology whose section sizes do n

• Mettez à jour vers 6.12.111-1

staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown

In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown The TX cleanup tasklet can be scheduled by the watchdog IRQ handler to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in the queue which might run after the cvm_oct_remove() frees net_device structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it iterates cvm_oct_device[] which is an array of netdevice pointers. Add tasklet_kill() after free_irq() to ensure the tasklet is no longer scheduled or running before teardown proceeds.

• Mettez à jour vers 6.12.111-1

staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown

In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown cvm_oct_rx_shutdown calls free_irq and netif_napi_del without disabling the napi instance first. As the free_irq only waits for completion of hard interrupt handlers, the napi poll function could still be active. If cvm_oct_remove proceeds to free the plat structure (which holds the NAPI instances), the active poll function will access freed memory, resulting in a use-after-free crash.

• Mettez à jour vers 6.12.111-1

phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator

In the Linux kernel, the following vulnerability has been resolved: phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator devm_regulator_get_exclusive() initialises the regulator with enable_count = 1, requiring the consumer to disable it before release. The devm disable action was previously only registered when the caller explicitly requested enable, so when the regulator was left in its initial enabled state without an explicit enable call, the cleanup path skipped decrementing enable_count, triggering a WARN_ON during regulator release on device removal. Fix this by always registering the devm disa

pinctrl: bcm2835: Don't remove an unregistered GPIO chip

In the Linux kernel, the following vulnerability has been resolved: pinctrl: bcm2835: Don't remove an unregistered GPIO chip If the devm_pinctrl_register() function fails, bcm2835_pinctrl_probe() calls gpiochip_remove() before gpiochip_add_data() has registered the GPIO chip. This means that upon failure the gpio_chip.gpiodev is NULL resulting in a null pointer dereference inside the gpiochip_remove() function. Remove the unnecessary function call to gpiochip_remove(). No GPIO cleanup is required because the GPIO chip has not yet been registered. Without this change there is potential for a kernel panic upon registration failure

• Mettez à jour vers 6.12.111-1

regulator: tps6594: Fix device node reference leaks in multiphase loop

In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594: Fix device node reference leaks in multiphase loop In tps6594_regulator_probe(), the multi-phase configuration loop calls of_find_node_by_name() to find buck nodes by name, and of_get_parent() twice to navigate to the PMIC parent node. None of the acquired node references (np, intermediate parent, np_pmic_parent) are ever released via of_node_put(), causing a reference leak on every loop iteration. Additionally, of_find_node_by_name() can return NULL, but the result was immediately passed to of_node_full_name() and of_get_parent() without a NULL check,

• Mettez à jour vers 6.12.111-1

remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3

In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping t

wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate ath11k can receive HT/VHT/HE frames whose reported MCS is above the maximum that can be expressed in the corresponding mac80211 rate space (e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11). The frame itself is valid and decodes correctly, but for such a frame ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches mac80211 it trips

• Mettez à jour vers 6.12.111-1

bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn

In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for 'dst_reg = src_reg + <percpu_base_off>'. However, the interpreter ignores the 'off' at its ALU64_MOV_X label. The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when the interpreter loads memory from the register, it will hit a page fault. [ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034 [ 2.546485] #PF: supervisor read access in kernel mode [ 2.547167] #PF: error_code(0x0000) - not-present page

ext4: fix circular lock dependency in ext4_ext_migrate

In the Linux kernel, the following vulnerability has been resolved: ext4: fix circular lock dependency in ext4_ext_migrate Move iput(tmp_inode) after ext4_writepages_up_write() to avoid a circular lock dependency between s_writepages_rwsem and sb_internal (freeze protection). The deadlock scenario: CPU0 (EXT4_IOC_MIGRATE) CPU1 (orphan cleanup during mount) ---- ---- ext4_ext_migrate() ext4_writepages_down_write() s_writepages_rwsem (write) ext4_evict_inode() sb_start_intwrite() [sb_internal]

• Mettez à jour vers 6.12.111-1

ext4: skip extra isize expansion during mount to prevent deadlock

In the Linux kernel, the following vulnerability has been resolved: ext4: skip extra isize expansion during mount to prevent deadlock ext4_try_to_expand_extra_isize() is called from __ext4_mark_inode_dirty() while holding an active jbd2 handle. During mount (!SB_ACTIVE), the expand path may move xattrs to external blocks and release ea_inodes via iput(). When !SB_ACTIVE, iput() calls write_inode_now() which acquires s_writepages_rwsem, creating a circular lock dependency: s_writepages_rwsem --> jbd2_handle --> xattr_sem --> s_writepages_rwsem This can be triggered via: ext4_process_orphan() -> ext4_truncate() -> ext4_mark_inode_dir

• Mettez à jour vers 6.12.111-1

RDMA/efa: Fix PBL chunk length computation

In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's an indirect PBL we create a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte control buffer at the end of it holding the next chunk's pointer and its length. If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the calculated last chunk length is wrongly computed as 0, even though that chunk is fully populated with 510 real page pointers. This wrong length is used both to DMA map the chunk

• Mettez à jour vers 6.12.111-1

md/raid5-ppl: fix use-after-free in ppl_do_flush()

In the Linux kernel, the following vulnerability has been resolved: md/raid5-ppl: fix use-after-free in ppl_do_flush() The loop in ppl_do_flush() continues iterating after calling ppl_io_unit_finished(), touching io->pending_flushes and leading to a use-after-free. Add a break statement to stop the loop once io is freed.

• Mettez à jour vers 6.12.111-1

locking/lockdep: Fix NULL pointer dereference in __lock_set_class()

In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Fix NULL pointer dereference in __lock_set_class() register_lock_class() can return NULL when the lock class pool is exhausted, graph_lock() fails, or key validation fails. However, __lock_set_class() uses the return value directly in pointer arithmetic without a NULL check: class = register_lock_class(lock, subclass, 0); hlock->class_idx = class - lock_classes; If class is NULL, this computes a wild offset that corrupts hlock->class_idx. The subsequent reacquire_held_locks() call will invoke hlock_class() with this corrupted index, leading to a NULL

• Mettez à jour vers 6.12.111-1