Vulnérabilités de linux · Page n° 75

RDMA/core: Fix potential use after free in ib_destroy_srq_user()

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_srq_user() When accessing a SRQ via the netlink path the only synchronization mechanism for the said SRQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_srq_user(), which is too late, since by that point vendor-specific resources associated with the SRQ might already be freed. This can leave a short window where the SRQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_srq

• Mettez à jour vers 6.12.111-1

RDMA/core: Fix potential use after free in counter_release()

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in counter_release() When accessing a counter via the netlink path the only synchronization mechanism for the said counter is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of counter_release(), which is too late, since by that point vendor-specific resources associated with the counter might already be freed. This can leave a short window where the counter remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of

• Mettez à jour vers 6.12.111-1

RDMA/core: Fix potential use after free in ib_free_cq()

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_free_cq() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_free_cq(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of the vendor-specific resources

• Mettez à jour vers 6.12.111-1

RDMA/core: Fix potential use after free in ib_dealloc_pd_user()

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_dealloc_pd_user() When accessing a PD via the netlink path the only synchronization mechanism for the said PD is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_dealloc_pd_user(), which is too late, since by that point vendor-specific resources associated with the PD might already be freed. This can leave a short window where the PD remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_dealloc_pd_user()

• Mettez à jour vers 6.12.111-1

firmware: arm_scmi: Fix requested device removal race

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix requested device removal race scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while notifying listeners but continues to retain the per-protocol list head. When two SCMI drivers for the same protocol unregister concurrently, one thread can remove the final request and free the list head while the other is running its notifier. The latter then dereferences the freed list head after reacquiring the mutex and can free it a second time. Complete the list and IDR updates, including freeing an empty list head, before dropping the mutex.

• Mettez à jour vers 6.12.111-1

thermal: intel: int3400: clean up ODVP on probe failures

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int3400: clean up ODVP on probe failures evaluate_odvp() creates per-ODVP sysfs files before the thermal zone and later probe resources are registered. The current unwind path only calls cleanup_odvp() from the late sysfs failure path, so failures after evaluate_odvp() but before that label, including thermal_tripless_zone_device_register() failures, leave the ODVP files and storage behind. Move the ODVP cleanup to the common ART/TRT unwind path so every failure after evaluate_odvp() releases the ODVP state. Also clear the cached ODVP pointers in cleanup_od

• Mettez à jour vers 6.12.111-1

ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find()

In the Linux kernel, the following vulnerability has been resolved: ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find() Syzbot/stress-ng reported an ABBA deadlock in ext4 when exercising concurrent xattr workloads (using the ea_inode mount/format option). The deadlock occurs between the running transaction and the eviction thread: - Task 1 (stress-ng): Holds a reference to a shared mbcache_entry (ce) and calls ext4_xattr_inode_cache_find() -> ext4_iget() to retrieve the corresponding EA inode. Since the EA inode is currently being evicted, ext4_iget() blocks in __wait_on_freeing_inode() waiting for eviction to complete. - Task

ext4: clear stale xarray tags on folios skipped during writeback

In the Linux kernel, the following vulnerability has been resolved: ext4: clear stale xarray tags on folios skipped during writeback In data=journal mode, the writeback thread can hit the WARN_ON_ONCE(sb_rdonly(sb)) in ext4_journal_check_start() while the superblock is being remounted read-only during reboot: Workqueue: writeback wb_workfn (flush-253:0) RIP: 0010:ext4_journal_check_start+0x8b/0xd0 Call Trace: __ext4_journal_start_sb+0x3c/0x1e0 mpage_prepare_extent_to_map+0x4af/0x580 ext4_do_writepages+0x3c0/0x1080 ext4_writepages+0xc8/0x1a0 do_writepages+0xc4/0x180 __writeback_single_inode+0x45/0x2f0 writeback_sb_inodes+0x26b

• Mettez à jour vers 6.12.111-1

ext4: drain in-flight DIO before buffered write fallback

In the Linux kernel, the following vulnerability has been resolved: ext4: drain in-flight DIO before buffered write fallback generic/746 started failing intermittently on ext3 (no-extent inodes). The test triggers 'Page cache invalidation failure on direct I/O' warnings and subsequent fsync returns -EIO. Adding a 50ms delay between ext4_buffered_write_iter() and filemap_write_and_wait_range() in ext4_dio_write_iter() makes the race almost always reproducible. On no-extent inodes, DIO writes to holes cannot use unwritten extents, so ext4_iomap_alloc() leaves m_flags=0 and ext4_map_blocks() returns 0. The iomap layer then returns -ENOTBLK, c

• Mettez à jour vers 6.12.111-1

ext4: use fsdata to track inline data write state and fix race

In the Linux kernel, the following vulnerability has been resolved: ext4: use fsdata to track inline data write state and fix race Instead of checking the live inode state (ext4_has_inline_data(inode) and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the write_end handlers, use the fsdata parameter of the address space operations to explicitly pass down the state in which write_begin prepared the write. A concurrent thread (such as ext4_page_mkwrite()) can convert the inline data to an extent between write_begin and write_end. If this happens, the write_end handlers would previously miss the inline write_end path and fall th

ext4: validate readdir offset before accessing dirent

In the Linux kernel, the following vulnerability has been resolved: ext4: validate readdir offset before accessing dirent A corrupted directory can trigger the following KASAN report when ext4_readdir() resumes from an invalid position: BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820 Read of size 2 at addr ffff88810a646000 by task repro_linear/509 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 kasan_report+0xce/0x100 __ext4_check_dir_entry+0x5ef/0x820 ext4_readdir+0xcde/0x2b70 iterate_dir+0x1a1/0x520 __x64_sys_getdents64+0x12b/0x220 do_syscall_64+0xf9/0x540 entry_SY

wifi: ath6kl: avoid buffer overreads in WMI event handlers

In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: avoid buffer overreads in WMI event handlers The following WMI event handlers currently read from the event buffer without first verifying that the message was large enough to hold the expected event: ath6kl_wmi_scan_complete_rx() ath6kl_wmi_addba_req_event_rx() ath6kl_wmi_delba_req_event_rx() Add length checks to prevent overread.

• Mettez à jour vers 6.12.111-1

wifi: ath12k: Avoid buffer overread in ath12k_wmi_op_rx()

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid buffer overread in ath12k_wmi_op_rx() Currently, in ath12k_wmi_op_rx(), the firmware buffer is read without first verifying that the buffer has enough data to hold a header. This could result in a buffer overread. Update the logic to verify the buffer contains at least enough data to hold a wmi_cmd_hdr before reading from the buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3

• Mettez à jour vers 6.12.111-1

wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx()

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx() Currently, in ath11k_wmi_tlv_op_rx(), the firmware buffer is read without first verifying that the buffer has enough data to hold a header. This could result in a buffer overread. Add an upfront length check before dereferencing skb->data as a wmi_cmd_hdr. The check is placed before the trace_ath11k_wmi_event() call to preserve the existing trace semantics (tracing the full raw WMI event including the header), unlike the analogous ath12k fix which could use skb_pull_data() directly. Compile tested only.

• Mettez à jour vers 6.12.111-1

RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap bnxt_re_mmap() rejects VM_WRITE for the DBR_PAGE and TOGGLE_PAGE mmap flags, but a read-only mapping can still retain VM_MAYWRITE. nd later be upgraded with mprotect(PROT_WRITE). This can bypass the write check that only runs at mmap time. Clear VM_MAYWRITE before vm_insert_page() in the shared DBR/toggle-page branch, matching the existing policy that userspace writes are not expected for these pages.

• Mettez à jour vers 6.12.111-1

ext4: fix buffer_head leak in ext4_init_orphan_info

In the Linux kernel, the following vulnerability has been resolved: ext4: fix buffer_head leak in ext4_init_orphan_info ext4_init_orphan_info() reads orphan file blocks with ext4_bread() and stores the returned buffer_head in oi->of_binfo[i].ob_bh. If ext4_bread() succeeds but the orphan block magic or checksum validation fails, the function jumps to out_free. However, the old out_free loop starts releasing buffers from i - 1, so the current buffer_head at index i is skipped. This leaks the buffer_head reference obtained by ext4_bread() on the bad magic and bad checksum error paths. Fix this by tracking the number of successfully read bu

• Mettez à jour vers 6.12.111-1

cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active

In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active The crash issue may occur when modprobe amd_pstate_ut on intel platform. amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success! amd_pstate_ut: 2 amd_pstate_ut_check_enabled success! BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 20300 Comm: modprobe Kdump: loaded Tainted: G O 6.6.0-0010.rc1.ctl4.x86_64 #1 Hardware

firmware: arm_scmi: Roll back partial protocol table registration

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Roll back partial protocol table registration scmi_protocol_table_register() can leave earlier requests registered when a later entry in the same ID table fails. Each request retains a pointer to the driver's ID table, so a failed module load can leave a dangling pointer after the module storage is released. Unrequest only the successfully registered prefix, in reverse order, before returning the failure. Leave the failed entry and the remaining entries untouched because matching requests can be owned by another driver.

• Mettez à jour vers 6.12.111-1

firmware: arm_scmi: Unrequest devices if driver registration fails

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unrequest devices if driver registration fails scmi_driver_register() requests protocol devices before registering the driver. If driver_register() fails, those requests remain in the global IDR and retain pointers to the module's ID table. Once the failed module load releases that storage, later request matching or SCMI device creation can dereference the stale pointers. Unrequest the complete protocol table before returning the registration failure. At this point table registration succeeded, so every entry is owned by the current registration attempt

• Mettez à jour vers 6.12.111-1

xfrm: Fix skb double-free in xfrm_dev_direct_output()

In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix skb double-free in xfrm_dev_direct_output() A return value other than 1 from local_out() means that the skb has been consumed or its ownership was transferred. xfrm_dev_direct_output() nevertheless frees the skb on this path, causing a double-free when netfilter drops the packet and invalidating any other owner. Return the local_out() result directly, matching the ownership handling in xfrm_output_resume().

• Mettez à jour vers 6.12.111-1