Vulnérabilités de linux · Page n° 93

HID: bpf: serialize device reference release in struct_ops destroy path

In the Linux kernel, the following vulnerability has been resolved: HID: bpf: serialize device reference release in struct_ops destroy path __hid_bpf_ops_destroy_device() and hid_bpf_unreg() can race on the same registration reference, double-putting struct hid_device and freeing it while hid_destroy_device() still uses it. Serialize the remove/NULL decision under hdev->bpf.prog_list_lock so exactly one path releases each registration reference: unreg re-checks ops->hdev under the lock and returns without putting when the destroy path already cleared it; all put_device() calls happen after the lock is dropped, which is safe because a concu

• Mettez à jour vers 6.12.111-1

HID: rmi: fix OOB access with undersized RMI reports

In the Linux kernel, the following vulnerability has been resolved: HID: rmi: fix OOB access with undersized RMI reports The hid-rmi driver sizes its writeReport/readReport buffer purely from the report descriptor supplied by the device, with no minimum bound: data->input_report_size = hid_report_len(input_report); data->output_report_size = hid_report_len(output_report); alloc_size = data->output_report_size + data->input_report_size; data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); data->readReport = data->writeReport + data->output_report_size; but then reads and writes fixed offsets into it. A device declar

• Mettez à jour vers 6.12.111-1

HID: wacom: validate report length in wacom_intuos_pro2_bt_irq

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: validate report length in wacom_intuos_pro2_bt_irq wacom_intuos_pro2_bt_irq() receives the wire report length in `len` but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive `len`: wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wac

• Mettez à jour vers 6.12.111-1

dm: fix race when loading and unloading a table

In the Linux kernel, the following vulnerability has been resolved: dm: fix race when loading and unloading a table If the userspace calls two concurrent table load ioctls and one of them succeeds and the other fails, there is a race condition because dm_setup_md_queue walks &md->table_devices without any lock. If the walk races with dm_table_destroy -> free_devices -> dm_put_table_device, there is access to invalid memory. Fix this race by extending the lock over the list walk.

• Mettez à jour vers 6.12.111-1

dm: fix resume-vs-remove race

In the Linux kernel, the following vulnerability has been resolved: dm: fix resume-vs-remove race If the user issues the resume ioctl and the remove ioctl at the same time, it may be possible that the device is resumed after it is suspended in __dm_destroy. The result is that the table is destroyed without calling the postsuspend method. Dm targets expect that they may be removed only after the postsuspend method method was called. If we break this expectation, it can cause misbehavior in various targets. For example - in the dm-integrity target, the reboot notifier is not unregistered, leading to use-after-free. Fix this bug by refusing

• Mettez à jour vers 6.12.111-1

dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds

In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the caller's fd table via dma_buf_fd() -> fd_install() before dma_heap_ioctl() copies the result back to userspace. If the trailing copy_to_user() fails, userspace never learns the fd number, but the fd (and the underlying dma-buf reference) are already visible to other threads in the same process and are leaked for the lifetime of the process. The obvious "close it on the failure path" fix is unsafe: once fd_install() has run, another thread

• Mettez à jour vers 6.12.113-1

dma-direct: return struct page from dma_direct_alloc_from_pool()

In the Linux kernel, the following vulnerability has been resolved: dma-direct: return struct page from dma_direct_alloc_from_pool() Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool helper") changed dma_direct_alloc_from_pool() to return the CPU address from dma_alloc_from_pool(). That fits dma_direct_alloc(), but dma_direct_alloc_pages() also uses the helper and expects a struct page *. Fix this by making dma_direct_alloc_from_pool() return the struct page * again, and pass the CPU address back through an out-parameter for the dma_direct_alloc() caller.

• Mettez à jour vers 6.12.111-1

dmaengine: fsl-edma: tracing: no ptr dereference during log output

In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: tracing: no ptr dereference during log output The fsl edma events store a pointer to a struct fsl_edma_engine in the ringbuffer and dereference it when a log entry is printed. At this time, the pointer may no longer be valid. Event injection can be used to trigger a crash: $ cd /sys/kernel/tracing $ echo 'value = 0' > events/fsl_edma/edma_writeb/inject $ cat trace The log output needs only edma->membase. Add a membase field at the end of the event and use the new field for log output. Keep the existing fields for backward compatibility.

• Mettez à jour vers 6.12.111-1

dmaengine: dw-edma: Initialize IRQ data before requesting IRQs

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Initialize IRQ data before requesting IRQs dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before dw_edma_channel_setup() fills the back pointer. A shared interrupt can therefore enter the handler with dw_irq->dw still NULL, leading to a NULL pointer dereference. Set the back pointer before installing each handler.

• Mettez à jour vers 6.12.111-1

cpuidle: dt_idle_genpd: kfree() the original name allocation

In the Linux kernel, the following vulnerability has been resolved: cpuidle: dt_idle_genpd: kfree() the original name allocation dt_idle_pd_alloc() kasprintf()s the full node path, then points pd->name at kbasename() of that string. dt_idle_pd_free() kfree()s pd->name, which is no longer the start of the allocation. Copy the basename instead.

• Mettez à jour vers 6.12.111-1

ceph: lock mutex in ceph_mds_check_access()

In the Linux kernel, the following vulnerability has been resolved: ceph: lock mutex in ceph_mds_check_access() MDS session OPEN handling replaces mdsc->s_cap_auths under mdsc->mutex, freeing the previous array and its strings. ceph_mds_check_access() traverses this array without holding the mutex. A concurrent session reopen can therefore free the array while it is being inspected, resulting in a use-after-free like this: Unable to handle kernel paging request at virtual address 003aaad64b2c8bb9 [...] Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 56 UID: 2953037534 PID: 1253231 Comm: php-cgi8.4 Not t

• Mettez à jour vers 6.12.111-1

ima: Check for ERR_PTR from dentry_path() in validate_hash_algo()

In the Linux kernel, the following vulnerability has been resolved: ima: Check for ERR_PTR from dentry_path() in validate_hash_algo() dentry_path() returns ERR_PTR(-ENAMETOOLONG) when the path exceeds the buffer. validate_hash_algo() passes the result straight to integrity_audit_msg() without checking. ERR_PTR is not NULL, so integrity_audit_message() sees a valid pointer and calls strlen() on it, which faults: BUG: unable to handle page fault for address: ffffffffffffffdc RIP: 0010:strlen+0x30/0xa0 Call Trace: audit_log_untrustedstring+0x19/0x30 integrity_audit_message+0x366/0x4f0 ima_inode_setxattr+0x512/0x5f0

• Mettez à jour vers 6.12.111-1

kprobes: Protect kprobe_blacklist with RCU

In the Linux kernel, the following vulnerability has been resolved: kprobes: Protect kprobe_blacklist with RCU __within_kprobe_blacklist() traverses kprobe_blacklist without holding kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist() removes blacklist entries and immediately frees them with kfree(). A concurrent call to within_kprobe_blacklist() can therefore dereference freed memory. Furthermore, within_kprobe_blacklist() can be called in atomic or non-preemptible contexts where the sleeping kprobe_mutex cannot be taken. Protect kprobe_blacklist with RCU. Use guard(rcu)() and list_for_each_entry_rcu() for traversal, l

• Mettez à jour vers 6.12.111-1

mm/huge_memory: transfer the pmd dirty bit to the folio on zap

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: transfer the pmd dirty bit to the folio on zap zap_huge_pmd_folio() propagates the pmd young bit to the folio for the file case, but not the dirty bit. The pte path does propagate it, in zap_present_folio_ptes() and so does the pmd split path, in __split_huge_pmd_locked(). For most file mappings the omission is harmless, because writing to a shared file mapping goes through page_mkwrite(), which dirties the folio. tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify() is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping inst

mm/mempolicy: fix sleeping allocation in alloc_pages_bulk_weighted_interleave()

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix sleeping allocation in alloc_pages_bulk_weighted_interleave() syzbot reported a sleeping function called from invalid context splat in bucket_table_alloc(). When rhashtable_insert_slow() rehashes the table under rcu_read_lock(), it calls bucket_table_alloc(..., GFP_ATOMIC | __GFP_NOWARN). If the bucket table allocation uses vmalloc, __vmalloc_node_range_noprof() invokes vm_area_alloc_pages() -> alloc_pages_bulk_mempolicy_noprof() with the passed GFP_ATOMIC flags. If the current task has an MPOL_WEIGHTED_INTERLEAVE mempolicy, alloc_pages_bulk_weighted_in

• Mettez à jour vers 6.12.111-1

perf/x86/intel: Fix kernel address leakages in LBR stack

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix kernel address leakages in LBR stack Before Arch LBR gained CPL filtering support, a user-only branch stack could still contain kernel addresses. As a result, kernel branch records may be exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. For example, on Intel Tiger Lake, the following command can still report SYSRET/ERET entries with kernel-space from addresses: $ ./perf record -e cycles:p -o - --branch-filter any,save_type,u -- \ ./perf bench syscall basic --loop 1000 | \ ./perf script -i - --fields brstack|tr ' ' '\n'| \ grep

• Mettez à jour vers 6.12.111-1

i2c: core: fix debugfs UAF on adapter removal

In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix debugfs UAF on adapter removal i2c_del_adapter() frees the adapter's debugfs directory before it unregisters the adapter device, but the new_device sysfs attribute stays writable until device_del(). A write racing with removal still reaches i2c_device_probe(), which passes the freed adap->debugfs to debugfs_create_dir() as the new client's parent: BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430 Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090 lookup_noperm_common+0x407/0x430 simple_start_creating+0x9c/0x110 debug

• Mettez à jour vers 6.12.111-1

i2c: mux: Fix channel node leak on adapter add failure

In the Linux kernel, the following vulnerability has been resolved: i2c: mux: Fix channel node leak on adapter add failure i2c_mux_add_adapter() takes a reference to the Device Tree channel node before registering the new adapter. If adapter registration fails, the error path frees the private data without dropping that reference. Release the channel node before freeing the private data.

• Mettez à jour vers 6.12.111-1

ALSA: harmony: initialize locks before requesting IRQ

In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state.

• Mettez à jour vers 6.12.111-1

ALSA: pcm: Fix race between non-atomic ops and trigger-start

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix race between non-atomic ops and trigger-start We protect the races of the concurrent state transitions between atomic PCM ops, but the checks between the non-atomic ops (hw_params, hw_free and prepare) and the atomic ops aren't perfect; there is a check of the conflicting PCM state at the beginning of hw_params & co, but the atomic PCM ops can be still issued during the non-atomic PCM operations. An example such scenario is that a thread A re-issues the PREPARE or HW_PARAMS for the already prepared stream, while another thread B triggers the PCM start in the

• Mettez à jour vers 6.12.111-1