PatchFirst · Vulnérabilités récentes
Vulnérabilités publiées pour linux au cours des 30 derniers jours : 1103. Présentes dans le catalogue KEV : 0.
Vulnérabilités : 20175
In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: ensure accessible eth_hdr proto field When batadv_get_vid() accesses the proto field of the ethernet header, it is not checking if the data itself is accessible. The caller is responsible for it. But in contrast to other call sites, batadv_dat_get_vid() and its caller didn't make sure this is true. This could have caused an out-of-bounds access.
In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in decompress_lznt decompress_lznt() does not validate array index bounds before accessing the decompression table. A corrupted NTFS3 image with invalid compressed data can trigger an out-of-bounds read. Add index bounds checking to prevent the OOB access.
In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix NULL pointer dereference in initialization The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - only expose sysfs attributes on control interface When the driver was converted to use the driver core to instantiate device attributes (via .dev_groups in the usb_driver structure), the attributes started appearing on all interfaces bound to the driver. Since the ims-pcu driver manually claims the secondary data interface during probe, the driver core automatically creates the sysfs attributes for that interface as well. However, the driver only supports these attributes on the primary control interface. Data interfaces lack the necessary descriptors and
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - add response length checks The driver processes response data from device buffers without verifying that the device actually sent enough data. This can lead to out-of-bounds reads or processing stale data. Add checks for the expected response length before accessing the buffers.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_atk0110) Check package count before accessing element atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package
In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: fail early if address range parameters are invalid The comment on top of `struct damon_region` clearly says that For any use case, @ar should be non-zero positive size. which is now verified in damon_verify_new_region() if the kernel is built with DAMON_DEBUG_SANITY. The WARN_ONCE() can be triggered if the mtier sample module is enabled before node{0,1}_{start,end}_addr have been properly initialized, which is obviously not good. ------------[ cut here ]------------ start 0 >= end 0 WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118,
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix listxattr handling of corrupted xattr entries Validate the xattr entry before reading its fields in f2fs_listxattr(). Return -EFSCORRUPTED when the entry is outside the valid xattr storage area instead of returning a successful partial result.
In the Linux kernel, the following vulnerability has been resolved: inet: frags: strip GSO state from fragments before reassembly A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims
In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to st
In the Linux kernel, the following vulnerability has been resolved: mptcp: reclaim forward-allocated memory on RX path errors After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"), errors in the receive path prior to queueing skbs into the receive queue do not trigger forward-allocated memory reclaiming. Prevent forward memory from growing unboundedly in pathological drop scenarios by explicitly reclaiming memory when skbs are dropped.
In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid combining some incoming suboptions Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are th
In the Linux kernel, the following vulnerability has been resolved: mptcp: options: reset DSS fields in case of unexpected size A remote peer could send a malformed DSS with a wrong size, followed by another DSS or MPC + Data. In this case, the first suboption will be ignored, but leaving some fields written, which could lead to inconsistency or access uninitialized data. Explicitly reset the fields that could have been modified in case of unexpected size.
In the Linux kernel, the following vulnerability has been resolved: mptcp: fastopen: only mark MPTFO subflows with SYN data Passive TCP Fast Open accepts a valid-cookie SYN even when it carries no data. In that case the child socket's receive queue is intentionally left empty. mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking for queued SYN data. That made data-less TFO SYNs hit a WARN and, if the warning was non-fatal, left stale MPTFO state behind. The stale flag could later trigger a state-confusion bug in check_fully_established(). Only mark the subflow as MPTFO after confirming that an SKB was queued. Return qui
In the Linux kernel, the following vulnerability has been resolved: s390/qeth: validate user buffer length in SNMP and ARP query ioctls qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by a user-supplied length (udata_len) without checking a lower bound, then set udata_offset to a fixed non-zero value and pass both to a reply callback. The callback bounds-checks the copy with if ((udata_len - udata_offset) < len) Both fields are u32, so a udata_len smaller than udata_offset makes the subtraction wrap and the check pass, and the following memcpy() writes past the allocation. A udata_len of 0 also yields ZERO_SIZE
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed.
In the Linux kernel, the following vulnerability has been resolved: drm/shmem_helper: Check VMA boundaries for PMD mappings In the ->huge_fault handler do not install a PMD huge page mapping if the huge page exceeds the boundaries of the VMA. All other ->huge_fault handlers have similar checks and the resulting mapping will trigger a VM_BUG_ON_VMA() if it ever reaches copy_pmd_range().
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout Ignore IPC errors for pipeline state change if the firmware state is crashed or the IPC has timed out. If the firmware has crashed the kernel still needs to go through the state changes to reset its internal to be able to correctly work the next time the DSP is booted up. The case with IPC timeout is a bit more problematic, but it has been rootcaused to be the result of system scheduling blockage and the firmware did actually received and handled the message, but the reply handling got blocked by is
Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.