In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the
wifi: rtw89: fix HE extended capability length check
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix HE extended capability length check
rtw89_mac_check_he_obss_narrow_bw_ru_iter() reads extended capability
byte 10, but rejects only datalen values below 10. Byte 10 requires at
least 11 bytes.
Require datalen >= 11 before reading data[10].
greybus: audio: bound the topology section sizes against the fetched size
In the Linux kernel, the following vulnerability has been resolved:
greybus: audio: bound the topology section sizes against the fetched size
gb_audio_gb_get_topology() fetches a topology blob of a module-supplied
size, and gbaudio_tplg_parse_data() then walks it by adding the
module-supplied size_dais, size_controls and size_widgets fields to
form the control, widget and route section offsets. Those le32 sizes
are never checked against the fetched blob, so a module reporting a
small topology size but large section sizes makes the offsets point
past the allocation, and parsing reads out of bounds.
Reject a topology whose section sizes do n
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
The TX cleanup tasklet can be scheduled by the watchdog IRQ handler
to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in
the queue which might run after the cvm_oct_remove() frees net_device
structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it
iterates cvm_oct_device[] which is an array of netdevice pointers.
Add tasklet_kill() after free_irq() to ensure the tasklet is no longer
scheduled or running before teardown proceeds.
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash.
RDMA/bnxt_re: Validate udata before executing commands
In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Validate udata before executing commands
The destroy callbacks currently zero the udata output after tearing down
driver resources. If the userspace access fails, uverbs preserves the
uobject and allows the destroy callback to run again, even though the
driver resource has already been freed.
Call ib_no_udata_io() before teardown so udata failures are detected
while the resource is still intact, then return success after teardown
completes.
As part of this change, move ib_respond_empty_udata() to the start of
the create and modify flows. While this is not st
In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator
devm_regulator_get_exclusive() initialises the regulator with
enable_count = 1, requiring the consumer to disable it before release.
The devm disable action was previously only registered when the caller
explicitly requested enable, so when the regulator was left in its initial
enabled state without an explicit enable call, the cleanup path skipped
decrementing enable_count, triggering a WARN_ON during regulator
release on device removal.
Fix this by always registering the devm disa
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle log
pinctrl: bcm2835: Don't remove an unregistered GPIO chip
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: bcm2835: Don't remove an unregistered GPIO chip
If the devm_pinctrl_register() function fails,
bcm2835_pinctrl_probe() calls gpiochip_remove()
before gpiochip_add_data() has registered the GPIO chip.
This means that upon failure the gpio_chip.gpiodev
is NULL resulting in a null pointer dereference
inside the gpiochip_remove() function.
Remove the unnecessary function call to gpiochip_remove().
No GPIO cleanup is required because the GPIO chip
has not yet been registered. Without this change there
is potential for a kernel panic upon registration failure
regulator: tps6594: Fix device node reference leaks in multiphase loop
In the Linux kernel, the following vulnerability has been resolved:
regulator: tps6594: Fix device node reference leaks in multiphase loop
In tps6594_regulator_probe(), the multi-phase configuration loop calls
of_find_node_by_name() to find buck nodes by name, and of_get_parent()
twice to navigate to the PMIC parent node. None of the acquired node
references (np, intermediate parent, np_pmic_parent) are ever released
via of_node_put(), causing a reference leak on every loop iteration.
Additionally, of_find_node_by_name() can return NULL, but the result was
immediately passed to of_node_full_name() and of_get_parent() without a
NULL check,
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping t
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
ath11k can receive HT/VHT/HE frames whose reported MCS is above the
maximum that can be expressed in the corresponding mac80211 rate space
(e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11).
The frame itself is valid and decodes correctly, but for such a frame
ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range
value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY
from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches
mac80211 it trips
bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn
The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for
'dst_reg = src_reg + <percpu_base_off>'.
However, the interpreter ignores the 'off' at its ALU64_MOV_X label.
The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when
the interpreter loads memory from the register, it will hit a page
fault.
[ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034
[ 2.546485] #PF: supervisor read access in kernel mode
[ 2.547167] #PF: error_code(0x0000) - not-present page
ext4: fix circular lock dependency in ext4_ext_migrate
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix circular lock dependency in ext4_ext_migrate
Move iput(tmp_inode) after ext4_writepages_up_write() to avoid a
circular lock dependency between s_writepages_rwsem and sb_internal
(freeze protection).
The deadlock scenario:
CPU0 (EXT4_IOC_MIGRATE) CPU1 (orphan cleanup during mount)
---- ----
ext4_ext_migrate()
ext4_writepages_down_write()
s_writepages_rwsem (write)
ext4_evict_inode()
sb_start_intwrite() [sb_internal]
ext4: skip extra isize expansion during mount to prevent deadlock
In the Linux kernel, the following vulnerability has been resolved:
ext4: skip extra isize expansion during mount to prevent deadlock
ext4_try_to_expand_extra_isize() is called from __ext4_mark_inode_dirty()
while holding an active jbd2 handle. During mount (!SB_ACTIVE), the
expand path may move xattrs to external blocks and release ea_inodes via
iput(). When !SB_ACTIVE, iput() calls write_inode_now() which acquires
s_writepages_rwsem, creating a circular lock dependency:
s_writepages_rwsem --> jbd2_handle --> xattr_sem --> s_writepages_rwsem
This can be triggered via:
ext4_process_orphan() -> ext4_truncate() -> ext4_mark_inode_dir
RDMA/core: Fix potential use after free in uverbs_free_dmah()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in uverbs_free_dmah()
When accessing a dmah via the netlink path the only synchronization
mechanism for the said dmah is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
uverbs_free_dmah(), which is too late, since by that point
vendor-specific resources associated with the dmah might already be
freed. This can leave a short window where the dmah remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
uverbs_free_dmah
arm64: RSI: fix field-spanning write warning in attestation token init
In the Linux kernel, the following vulnerability has been resolved:
arm64: RSI: fix field-spanning write warning in attestation token init
The challenge is passed in registers a1 through a8. However, copying to
®s.a1 makes FORTIFY treat the destination as the single a1 field,
resulting in a field-spanning write warning. [1]
Overlay the SMCCC register structure with an RSI-specific argument
layout and copy the challenge into an explicit 64-byte array. This keeps
the existing a1-a8 argument encoding while giving the copy a correctly
sized destination object.
[1]
memcpy: detected field-spanning write (size 64) of single field "®s.a1" a
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
DSP3 has an integrated Ethernet MAC Endpoint which has its own set of
config registers for configuring settings such as ASPM. The Endpoint device
has two physical functions and those two functions share the same settings.
Parse the Endpoint node under DSP3 instead of parsing both functions. The
existing parsing logic also has one OOB issue as parsing both functions
will result in accessing past the tc9563_pwrctrl->cfg array.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix PBL chunk length computation
On register MR, when creating the PBL, if it's an indirect PBL we create
a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size
and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte
control buffer at the end of it holding the next chunk's pointer and its
length.
If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the
calculated last chunk length is wrongly computed as 0, even though that
chunk is fully populated with 510 real page pointers. This wrong length
is used both to DMA map the chunk
In the Linux kernel, the following vulnerability has been resolved:
clk: eswin: Zero-initialize stack-allocated clk_init_data
eswin_clk_register_pll() and eswin_register_clkdiv() declare a struct
clk_init_data on the stack and only initialize some of its fields
(parent_data respectively parent_hws). clk_core_populate_parent_map()
checks parent_names first and parent_data second before falling back
to parent_hws, so leftover stack garbage in the uninitialized fields
hijacks parent resolution and the clk core dereferences a bogus
pointer:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000c
Oops [#1]
epc