net/sched: taprio: avoid disabling offload when it was never enabled
In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: avoid disabling offload when it was never enabled
In an incredibly strange API design decision, qdisc->destroy() gets
called even if qdisc->init() never succeeded, not exclusively since
commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"),
but apparently also earlier (in the case of qdisc_create_dflt()).
The taprio qdisc does not fully acknowledge this when it attempts full
offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in
taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS
parsed from netlink (in t
netfilter: ebtables: fix memory leak when blob is malformed
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix memory leak when blob is malformed
The bug fix was incomplete, it "replaced" crash with a memory leak.
The old code had an assignment to "ret" embedded into the conditional,
restore this.
net: sched: fix possible refcount leak in tc_new_tfilter()
In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix possible refcount leak in tc_new_tfilter()
tfilter_put need to be called to put the refount got by tp->ops->get to
avoid possible refcount leak when chain->tmplt_ops != NULL and
chain->tmplt_ops != tp->ops.
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0
When walking through an inode extents, the ext4_ext_binsearch_idx() function
assumes that the extent header has been previously validated. However, there
are no checks that verify that the number of entries (eh->eh_entries) is
non-zero when depth is > 0. And this will lead to problems because the
EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this:
[ 135.245946] ------------[ cut here ]------------
[ 135.247579] kernel BUG at fs/ext4/extents.c:2258!
[ 135.249045] invalid o
In the Linux kernel, the following vulnerability has been resolved:
aio: fix mremap after fork null-deref
Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced
a null-deref if mremap is called on an old aio mapping after fork as
mm->ioctx_table will be set to NULL.
[[email protected]: fix 80 column issue]
x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
setting Hyper-V's TSC change callback. If Hyper-V setup failed in
hyperv_init(), the kernel will still report that it's running under
Hyper-V, but will have silently disabled nearly all functionality.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 1 Comm: swapper/0 Not
In the Linux kernel, the following vulnerability has been resolved:
scsi: advansys: Fix kernel pointer leak
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %lx to %p to print the hashed pointer.
usb: typec: tipd: Remove WARN_ON in tps6598x_block_read
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: Remove WARN_ON in tps6598x_block_read
Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.
ALSA: gus: fix null pointer dereference on pointer block
In the Linux kernel, the following vulnerability has been resolved:
ALSA: gus: fix null pointer dereference on pointer block
The pointer block return from snd_gf1_dma_next_block could be
null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.
usb: host: ohci-tmio: check return value after calling platform_get_resource()
In the Linux kernel, the following vulnerability has been resolved:
usb: host: ohci-tmio: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove
In the Linux kernel, the following vulnerability has been resolved:
net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove
Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output. The job is then added to a
completions list for cancellation.
Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter. If successfully added to
txcmplq, jobs are added to both lists resulting in list
thermal: Fix NULL pointer dereferences in of_thermal_ functions
In the Linux kernel, the following vulnerability has been resolved:
thermal: Fix NULL pointer dereferences in of_thermal_ functions
of_parse_thermal_zones() parses the thermal-zones node and registers a
thermal_zone device for each subnode. However, if a thermal zone is
consuming a thermal sensor and that thermal sensor device hasn't probed
yet, an attempt to set trip_point_*_temp for that thermal zone device
can cause a NULL pointer dereference. Fix it.
console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
...
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
Call trace:
iavf: free q_vectors before queues in iavf_disable_vf
In the Linux kernel, the following vulnerability has been resolved:
iavf: free q_vectors before queues in iavf_disable_vf
iavf_free_queues() clears adapter->num_active_queues, which
iavf_free_q_vectors() relies on, so swap the order of these two function
calls in iavf_disable_vf(). This resolves a panic encountered when the
interface is disabled and then later brought up again after PF
communication is restored.
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
In the Linux kernel, the following vulnerability has been resolved:
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt.
scsi: core: sysfs: Fix hang when device state is set via sysfs
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: sysfs: Fix hang when device state is set via sysfs
This fixes a regression added with:
commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")
The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.
We are then stuck, because when scsi_rescan_device() tries to
perf bpf: Avoid memory leak from perf_env__insert_btf()
In the Linux kernel, the following vulnerability has been resolved:
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked.
btrfs: fix memory ordering between normal and ordered work functions
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory ordering between normal and ordered work functions
Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.
This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode sudd
arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency
In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency
The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.
This p