fou: remove warn in gue_gro_receive on unsupported protocol
In the Linux kernel, the following vulnerability has been resolved:
fou: remove warn in gue_gro_receive on unsupported protocol
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks").
In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix shift-out-of-bounds in dbDiscardAG
When searching for the next smaller log2 block, BLKSTOL2() returned 0,
causing shift exponent -1 to be negative.
This patch fixes the issue by exiting the loop directly when negative
shift is found.
In the Linux kernel, the following vulnerability has been resolved:
sctp: Fix null-ptr-deref in reuseport_add_sock().
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]
The repro first creates a listener with SO_REUSEPORT. Then, it creates
another listener on the same port and concurrently closes the first
listener.
The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().
The problem is SCTP does not properly synchronise reuseport_alloc(),
r
gpio: prevent potential speculation leaks in gpio_device_get_desc()
In the Linux kernel, the following vulnerability has been resolved:
gpio: prevent potential speculation leaks in gpio_device_get_desc()
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Securi
md/raid5: avoid BUG_ON() while continue reshape after reassembling
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
re
drm/amdgpu: Fix the null pointer dereference to ras_manager
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix the null pointer dereference to ras_manager
Check ras_manager before using it
media: xc2028: avoid use-after-free in load_firmware_cb()
In the Linux kernel, the following vulnerability has been resolved:
media: xc2028: avoid use-after-free in load_firmware_cb()
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tun
drm/client: fix null pointer dereference in drm_client_modeset_probe
In the Linux kernel, the following vulnerability has been resolved:
drm/client: fix null pointer dereference in drm_client_modeset_probe
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is
assigned to modeset->mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
serial: core: check uartclk for zero to avoid divide by zero
In the Linux kernel, the following vulnerability has been resolved:
serial: core: check uartclk for zero to avoid divide by zero
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
memcg: protect concurrent access to mem_cgroup_idr
In the Linux kernel, the following vulnerability has been resolved:
memcg: protect concurrent access to mem_cgroup_idr
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against co
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix overflow in get_free_elt()
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a
Bluetooth: MGMT: Add error handling to pair_device()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Add error handling to pair_device()
hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.
Fixed by adding error handling in the function.
usb: vhci-hcd: Do not drop references before new references are gained
In the Linux kernel, the following vulnerability has been resolved:
usb: vhci-hcd: Do not drop references before new references are gained
At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.
In the Linux kernel, the following vulnerability has been resolved:
CDC-NCM: avoid overflow in sanity checking
A broken device may give an extreme offset like 0xFFF0
and a reasonable length for a fragment. In the sanity
check as formulated now, this will create an integer
overflow, defeating the sanity check. Both offset
and offset + len need to be checked in such a manner
that no overflow can occur.
And those quantities should be unsigned.
nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac()
In the Linux kernel, the following vulnerability has been resolved:
nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac()
ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX)
inclusive.
So NFP_MAX_MAC_INDEX (0xff) is a valid id.
In order for the error handling path to work correctly, the 'invalid'
value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range,
inclusive.
So set it to -1.
netfilter: nf_tables: fix memory leak during stateful obj update
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix memory leak during stateful obj update
stateful objects can be updated from the control plane.
The transaction logic allocates a temporary object for this purpose.
The ->init function was called for this object, so plain kfree() leaks
resources. We must call ->destroy function of the object.
nft_obj_destroy does this, but it also decrements the module refcount,
but the update path doesn't increment it.
To avoid special-casing the update object release, do module_get for
the update case too and release it via nft_obj_destroy().
configfs: fix a race in configfs_{,un}register_subsystem()
In the Linux kernel, the following vulnerability has been resolved:
configfs: fix a race in configfs_{,un}register_subsystem()
When configfs_register_subsystem() or configfs_unregister_subsystem()
is executing link_group() or unlink_group(),
it is possible that two processes add or delete list concurrently.
Some unfortunate interleavings of them can cause kernel panic.
One of cases is:
A --> B --> C --> D
A <-- B <-- C <-- D
delete list_head *B | delete list_head *C
--------------------------------|-----------------------------------
configfs_unregister_subsystem | configfs_unregister_subsystem
unlink_group
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ib_srp: Fix a deadlock
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync()
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
If iio_device_register() fails, a previous ioremap() is left unbalanced.
Update the error handling path and add the missing iounmap() call, as
already done in the remove function.