drm/bridge: anx7625: Fix overflow issue on reading EDID
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: anx7625: Fix overflow issue on reading EDID
The length of EDID block can be longer than 256 bytes, so we should use
`int` instead of `u8` for the `edid_pos` variable.
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: populate connector of struct dp_panel
DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.
The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum an
dax: make sure inodes are flushed before destroy cache
In the Linux kernel, the following vulnerability has been resolved:
dax: make sure inodes are flushed before destroy cache
A bug can be triggered by following command
$ modprobe nd_pmem && modprobe -r nd_pmem
[ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[ 10.062433] Call Trace:
[ 10.062673] dump_stack_lvl+0x34/0x44
[ 10.062865] slab_err+0x90/0xd0
[ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0
[ 10.063848] kmem_cache_destroy+0x4a/0x110
[ 10.064058] __
vfio/pci: fix memory leak during D3hot to D0 transition
In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: fix memory leak during D3hot to D0 transition
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then
the current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being
used and the pci_load_and_free_saved_state() will free the allocated
memory.
But for reset related IOCTLs, vfio driver calls PCI reset-related
API's which
In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix abort all task initialization
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:
[ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[ 197.712687] RDX: 0000000000
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.
In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix race at socket teardown
Fix a race in the xsk socket teardown code that can lead to a NULL pointer
dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by
setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any
NAPI processing to terminate using synchronize_net(). After that, the release
code starts to tear down the socket state and free allocated memory.
BUG: kernel NULL pointer dereference, address: 00000000000000c0
PGD 8000000932469067 P4D 8000000932469067 PUD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 25 PID: 6913
In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s: Don't use DSISR for SLB faults
Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data
is read or write.") we use page_fault_is_write(regs->dsisr) in
__bad_page_fault() to determine if the fault is for a read or write, and
change the message printed accordingly.
But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data
Storage Interrupt Status Register) to a useful value. All ISA versions
from v2.03 through v3.1 specify that the Data Segment Interrupt sets
DSISR "to an undefined value". As far as I can see there's no mention of
SLB fa
ath10k: Fix error handling in ath10k_setup_msa_resources
In the Linux kernel, the following vulnerability has been resolved:
ath10k: Fix error handling in ath10k_setup_msa_resources
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
The reference counting issue happens in several error handling paths
on a refcounted object "nc->dmac". In these paths, the function simply
returns the error code, forgetting to balance the reference count of
"nc->dmac", increased earlier by dma_request_channel(), which may
cause refcount leaks.
Fix it by decrementing the refcount of specific object in those error
paths.
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
In the Linux kernel, the following vulnerability has been resolved:
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
MIPS: pgalloc: fix memory leak caused by pgd_free()
In the Linux kernel, the following vulnerability has been resolved:
MIPS: pgalloc: fix memory leak caused by pgd_free()
pgd page is freed by generic implementation pgd_free() since commit
f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"),
however, there are scenarios that the system uses more than one page as
the pgd table, in such cases the generic implementation pgd_free() won't
be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and
MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER"
will be set as "1", which will cause allocating two pages as the pgd
table. Well, at the same time, the ge
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full
If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc()
returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial
memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is
greater than osize after sk_msg_alloc(), memleak occurs. To fix we use
sk_msg_trim() to release the allocated memory, then goto wait for memory.
Other call paths of sk_msg_alloc() have the similar issue, such as
tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(),
as Cong Wa
In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent some integer underflows
My static checker complains that:
drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init()
warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'?
It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware
in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could
be zero. Even if we trust the firmware, it's easy enough to change the
condition just as a hardenning measure.
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix memleak in sk_psock_queue_msg
If tcp_bpf_sendmsg is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk1 (redirect sk2) sk2
------------------- ---------------
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
tcp_bpf_sendmsg_redir()
bpf_tcp_ingress()
sock_map_close()
lock_sock()
lock_sock() ... blocking
sk_psock
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
In case the second xa_insert() fails, the obj_event is not released. Fix
the error unwind flow to free that memory to avoid a memory leak.
bpf, sockmap: Fix double uncharge the mem of sk_msg
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix double uncharge the mem of sk_msg
If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
sk_msg_return()
tcp_bpf_sendmsg_redir()
unlikely(!psock))
sk_msg_free()
The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an erro
bpf, sockmap: Fix more uncharged while msg has more_data
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix more uncharged while msg has more_data
In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():
tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc
tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc
The msg->sg.size(11000) has been uncharged
Bluetooth: hci_uart: add missing NULL check in h5_enqueue
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: add missing NULL check in h5_enqueue
Syzbot hit general protection fault in __pm_runtime_resume(). The problem
was in missing NULL check.
hu->serdev can be NULL and we should not blindly pass &serdev->dev
somewhere, since it will cause GPF.
In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: fix race between xmit and reset
There is a race between reset and the transmit paths that can lead to
ibmvnic_xmit() accessing an scrq after it has been freed in the reset
path. It can result in a crash like:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000016189f8
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic]
LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
Call Trace:
[c00