HID: betop: fix slab-out-of-bounds Write in betop_probe
In the Linux kernel, the following vulnerability has been resolved:
HID: betop: fix slab-out-of-bounds Write in betop_probe
Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver.
The problem is the driver assumes the device must have an input report but
some malicious devices violate this assumption.
So this patch checks hid_device's input is non empty before it's been used.
In the Linux kernel, the following vulnerability has been resolved:
ipack: ipoctal: fix module reference leak
A reference to the carrier module was taken on every open but was only
released once when the final reference to the tty struct was dropped.
Fix this by taking the module reference and initialising the tty driver
data when installing the tty.
In the Linux kernel, the following vulnerability has been resolved:
net: sched: flower: protect fl_walk() with rcu
Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul()
also removed rcu protection of individual filters which causes following
use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain
rcu read lock while iterating and taking the filter reference and temporary
release the lock while calling arg->fn() callback that can sleep.
KASAN trace:
[ 352.773640] ==================================================================
[ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flo
In the Linux kernel, the following vulnerability has been resolved:
ipack: ipoctal: fix stack information leak
The tty driver name is used also after registering the driver and must
specifically not be allocated on the stack to avoid leaking information
to user space (or triggering an oops).
Drivers should not try to encode topology information in the tty device
name but this one snuck in through staging without anyone noticing and
another driver has since copied this malpractice.
Fixing the ABI is a separate issue, but this at least plugs the security
hole.
net: hns3: do not allow call hns3_nic_net_open repeatedly
In the Linux kernel, the following vulnerability has been resolved:
net: hns3: do not allow call hns3_nic_net_open repeatedly
hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.
The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3
sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
In the Linux kernel, the following vulnerability has been resolved:
sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
We should always check if skb_header_pointer's return is NULL before
using it, otherwise it may cause null-ptr-deref, as syzbot reported:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline]
RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196
Call Trace:
<IRQ>
sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109
ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422
ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463
In the Linux kernel, the following vulnerability has been resolved:
mac80211-hwsim: fix late beacon hrtimer handling
Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx
that our handling of the hrtimer here is wrong: If the timer fires
late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot)
then it tries to actually rearm the timer at the next deadline,
which might be in the past already:
1 2 3 N N+1
| | | ... | |
^ intended to fire here (1)
^ next deadline here (2)
^ actually fired here
The next
mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap
In the Linux kernel, the following vulnerability has been resolved:
mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap
Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap
routine in order to fix the following warning reported by syzbot:
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
Modules linked in:
CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Googl
hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs
Fan speed minimum can be enforced from sysfs. For example, setting
current fan speed to 20 is used to enforce fan speed to be at 100%
speed, 19 - to be not below 90% speed, etcetera. This feature provides
ability to limit fan speed according to some system wise
considerations, like absence of some replaceable units or high system
ambient temperature.
Request for changing fan minimum speed is configuration request and can
be set only through 'sysfs' write procedure. In this situation val
In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix use-after-free in CCMP/GCMP RX
When PN checking is done in mac80211, for fragmentation we need
to copy the PN to the RX struct so we can later use it to do a
comparison, since commit bf30ca922a0c ("mac80211: check defrag
PN against current frame").
Unfortunately, in that commit I used the 'hdr' variable without
it being necessarily valid, so use-after-free could occur if it
was necessary to reallocate (parts of) the frame.
Fix this by reloading the variable after the code that results
in the reallocations, if any.
This fixes https://bugzilla.kernel.org/show
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Modules linked in:
CPU: 3 PID: 720 Comm: a.sh Tainted: G W 5.14.0-rc1-next-20210715-yocto-standard+ #507
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 4040000
hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field
If driver read val value sufficient for
(val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().
The patch fixes possible NULL pointer dereference by removing lm75[].
Found by Linux Driver Verification project (linuxtesting.org)
hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field
If driver read val value sufficient for
(val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().
The patch fixes possible NULL pointer dereference by removing lm75[].
Found by Linux Driver Verification project (linuxtesting.org)
hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field
If driver read tmp value sufficient for
(tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().
The patch fixes possible NULL pointer dereference by removing lm75[].
Found by Linux Driver Verification project (linuxtesting.org).
In the Linux kernel, the following vulnerability has been resolved:
tty: Fix out-of-bound vmalloc access in imageblit
This issue happens when a userspace program does an ioctl
FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct
containing only the fields xres, yres, and bits_per_pixel
with values.
If this struct is the same as the previous ioctl, the
vc_resize() detects it and doesn't call the resize_screen(),
leaving the fb_var_screeninfo incomplete. And this leads to
the updatescrollmode() calculates a wrong value to
fbcon_display->vrows, which makes the real_y() return a
wrong value of y, and that value, eventually, causes
the imag
blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
KASAN reports a use-after-free report when doing fuzz test:
[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338
[693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621] d
In the Linux kernel, the following vulnerability has been resolved:
bpf: Add oversize check before call kvcalloc()
Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:
WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
kvmalloc include/linux
blktrace: Fix uaf in blk_trace access after removing by sysfs
In the Linux kernel, the following vulnerability has been resolved:
blktrace: Fix uaf in blk_trace access after removing by sysfs
There is an use-after-free problem triggered by following process:
P1(sda) P2(sdb)
echo 0 > /sys/block/sdb/trace/enable
blk_trace_remove_queue
synchronize_rcu
blk_trace_free
relay_close
rcu_read_lock
__blk_add_trace
trace_note_tsk
(Iterate running_trace_list)
relay_close_buf
relay_destroy_buf
kfree(buf)
trace_note(sdb's bt)
relay_reserve
buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock
[ 502.714379] BUG:
irqchip/gic-v3-its: Fix potential VPE leak on error
In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Fix potential VPE leak on error
In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.
Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.
[maz: fixed commit message]
In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix use after free on rmmod
plat_dev->dev->platform_data is released by platform_device_unregister(),
use of pclk and hclk is a use-after-free. Since device unregister won't
need a clk device we adjust the function call sequence to fix this issue.
[ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci]
[ 31.275563] Freed by task 306:
[ 30.276782] platform_device_release+0x25/0x80