p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-gcp · Page n° 120

Vulnérabilité publiée pour linux-gcp au cours des 30 derniers jours : 0. Dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 3436

  1. CVE-2024-27412

    Moyenne · CVSS 5.5EPSS 0,25%Correctif disponible

    power: supply: bq27xxx-i2c: Do not free non existing IRQ

    In the Linux kernel, the following vulnerability has been resolved: power: supply: bq27xxx-i2c: Do not free non existing IRQ The bq27xxx i2c-client may not have an IRQ, in which case client->irq will be 0. bq27xxx_battery_i2c_probe() already has an if (client->irq) check wrapping the request_threaded_irq(). But bq27xxx_battery_i2c_remove() unconditionally calls free_irq(client->irq) leading to: [ 190.310742] ------------[ cut here ]------------ [ 190.310843] Trying to free already-free IRQ 0 [ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310 Followed by a backtrace when unbinding the driver. Add a

    • Mettez à jour vers 5.4.0-1130.139
    Publication Mise à jour
  2. CVE-2024-27410

    Élevée · CVSS 7.8EPSS 0,26%Correctif disponible

    wifi: nl80211: reject iftype change with mesh ID change

    In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject iftype change with mesh ID change It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallo

    • Mettez à jour vers 5.4.0-1130.139
    Publication Mise à jour
  3. CVE-2024-27405

    Élevée · CVSS 7.5EPSS 1,3%Correctif disponible

    usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Add

    • Mettez à jour vers 5.4.0-1130.139
    Publication Mise à jour
  4. CVE-2024-27401

    Élevée · CVSS 7.8EPSS 0,3%Correctif disponible

    firewire: nosy: ensure user_length is taken into account when fetching packet contents

    In the Linux kernel, the following vulnerability has been resolved: firewire: nosy: ensure user_length is taken into account when fetching packet contents Ensure that packet_buffer_get respects the user_length provided. If the length of the head packet exceeds the user_length, packet_buffer_get will now return 0 to signify to the user that no data were read and a larger buffer size is required. Helps prevent user space overflows.

    • Mettez à jour vers 5.4.0-1134.143
    Publication Mise à jour
  5. CVE-2024-27399

    Moyenne · CVSS 6EPSS 0,3%Correctif disponible

    Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308

    • Mettez à jour vers 5.4.0-1134.143
    Publication Mise à jour
  6. CVE-2024-27398

    Élevée · CVSS 8EPSS 0,83%Correctif disponible

    Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout When the sco connection is established and then, the sco socket is releasing, timeout_work will be scheduled to judge whether the sco disconnection is timeout. The sock will be deallocated later, but it is dereferenced again in sco_sock_timeout. As a result, the use-after-free bugs will happen. The root cause is shown below: Cleanup Thread | Worker Thread sco_sock_release | sco_sock_close | __sco_sock_close | sco_sock_set_timer

    • Mettez à jour vers 5.4.0-1134.143
    Publication Mise à jour
  7. CVE-2023-52655

    Moyenne · CVSS 5.5EPSS 0,27%Correctif disponible

    usb: aqc111: check packet for fixup for true limit

    In the Linux kernel, the following vulnerability has been resolved: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver.

    • Mettez à jour vers 5.4.0-1124.133
    Publication Mise à jour
  8. CVE-2024-27397

    Élevée · CVSS 7.8EPSS 0,26%Correctif disponible

    netfilter: nf_tables: use timestamp to check for set element timeout

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: use timestamp to check for set element timeout Add a timestamp field at the beginning of the transaction, store it in the nftables per-netns area. Update set backend .insert, .deactivate and sync gc path to use the timestamp, this avoids that an element expires while control plane transaction is still unfinished. .lookup and .update, which are used from packet path, still use the current time to check if the element has expired. And .get path and dump also since this runs lockless under rcu read size lock. Then, there is async gc which also needs to

    • Mettez à jour vers 5.4.0-1138.147
    Publication Mise à jour
  9. CVE-2024-27396

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    net: gtp: Fix Use-After-Free in gtp_dellink

    In the Linux kernel, the following vulnerability has been resolved: net: gtp: Fix Use-After-Free in gtp_dellink Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

    • Mettez à jour vers 5.4.0-1132.141
    Publication Mise à jour
  10. CVE-2024-27395

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    net: openvswitch: Fix Use-After-Free in ovs_ct_exit

    In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix Use-After-Free in ovs_ct_exit Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

    • Mettez à jour vers 5.4.0-1132.141
    Publication Mise à jour
  11. CVE-2022-48704

    Moyenne · CVSS 5.7EPSS 0,24%Correctif disponible

    drm/radeon: add a force flush to delay work when radeon

    In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Complet

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  12. CVE-2022-48695

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    scsi: mpt3sas: Fix use-after-free warning

    In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use-after-free warning Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  13. CVE-2022-48702

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()

    In the Linux kernel, the following vulnerability has been resolved: ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc() The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by callin

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  14. CVE-2022-48701

    Élevée · CVSS 7.1EPSS 0,24%Correctif disponible

    ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface() There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces.

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  15. CVE-2022-48697

    Critique · CVSS 9.8EPSS 0,59%Correctif disponible

    nvmet: fix a use-after-free

    In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a use-after-free Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  16. CVE-2022-48693

    Moyenne · CVSS 5.5EPSS 0,23%Correctif disponible

    soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs

    In the Linux kernel, the following vulnerability has been resolved: soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs In brcmstb_pm_probe(), there are two kinds of leak bugs: (1) we need to add of_node_put() when for_each__matching_node() breaks (2) we need to add iounmap() for each iomap in fail path

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  17. CVE-2022-48688

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    i40e: Fix kernel crash during module removal

    In the Linux kernel, the following vulnerability has been resolved: i40e: Fix kernel crash during module removal The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  18. CVE-2022-48687

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    ipv6: sr: fix out-of-bounds read when setting HMAC data.

    In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix out-of-bounds read when setting HMAC data. The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-o

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour
  19. CVE-2022-48686

    Critique · CVSS 9.8EPSS 0,7%Correctif disponible

    nvme-tcp: fix UAF when detecting digest errors

    In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix UAF when detecting digest errors We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted.

    • Mettez à jour vers 5.4.0-1097.106
    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →