p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-ibm-5.15 · Page n° 61

Vulnérabilité publiée pour linux-ibm-5.15 au cours des 30 derniers jours : 0. Dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 2543

  1. CVE-2024-47718

    Élevée · CVSS 7.8EPSS 0,25%Correctif disponible

    wifi: rtw88: always wait for both firmware loading attempts

    In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: always wait for both firmware loading attempts In 'rtw_wait_firmware_completion()', always wait for both (regular and wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()' has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue 'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually the wowlan one) is still in progress, causing UAF detected by KASAN.

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  2. CVE-2024-47713

    Moyenne · CVSS 5.5EPSS 0,26%Correctif disponible

    wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broad

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  3. CVE-2024-47712

    Élevée · CVSS 8.3EPSS 0,36%Correctif disponible

    wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param

    In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF va

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  4. CVE-2024-47710

    Moyenne · CVSS 6.7EPSS 0,23%Correctif disponible

    sock_map: Add a cond_resched() in sock_hash_free()

    In the Linux kernel, the following vulnerability has been resolved: sock_map: Add a cond_resched() in sock_hash_free() Several syzbot soft lockup reports all have in common sock_hash_free() If a map with a large number of buckets is destroyed, we need to yield the cpu when needed.

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  5. CVE-2024-47709

    Moyenne · CVSS 5.5EPSS 0,25%Correctif disponible

    can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  6. CVE-2024-47707

    Moyenne · CVSS 5.7EPSS 0,24%Correctif disponible

    ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev()

    In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev() Blamed commit accidentally removed a check for rt->rt6i_idev being NULL, as spotted by syzbot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 10998 Comm: syz-executor Not tainted 6.11.0-rc6-syzkaller-00208-g625403177711 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:rt6_uncached_list_flush_dev

    • Mettez à jour vers 5.15.0-1074.77~20.04.1
    Publication Mise à jour
  7. CVE-2024-47706

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    block, bfq: fix possible UAF for bfqq->bic with merge chain

    In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  8. CVE-2024-47705

    Moyenne · CVSS 5.5EPSS 0,22%Correctif disponible

    block: fix potential invalid pointer dereference in blk_add_partition

    In the Linux kernel, the following vulnerability has been resolved: block: fix potential invalid pointer dereference in blk_add_partition The blk_add_partition() function initially used a single if-condition (IS_ERR(part)) to check for errors when adding a partition. This was modified to handle the specific case of -ENXIO separately, allowing the function to proceed without logging the error in this case. However, this change unintentionally left a path where md_autodetect_dev() could be called without confirming that part is a valid pointer. This commit separates the error handling logic by splitting the initial if-condition, improving co

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  9. CVE-2024-47701

    Élevée · CVSS 7.8EPSS 0,25%Correctif disponible

    ext4: avoid OOB when system.data xattr changes underneath the filesystem

    In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  10. CVE-2024-47699

    Élevée · CVSS 7.1EPSS 0,26%Correctif disponible

    nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() Patch series "nilfs2: fix potential issues with empty b-tree nodes". This series addresses three potential issues with empty b-tree nodes that can occur with corrupted filesystem images, including one recently discovered by syzbot. This patch (of 3): If a b-tree is broken on the device, and the b-tree height is greater than 2 (the level of the root node is greater than 1) even if the number of child nodes of the b-tree root is 0, a NULL pointer dereference occurs in nilfs_btree_prepare_insert(), which is calle

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  11. CVE-2024-47698

    Élevée · CVSS 7.8EPSS 0,27%Correctif disponible

    drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error

    In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  12. CVE-2024-47697

    Élevée · CVSS 7.8EPSS 0,28%Correctif disponible

    drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error

    In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue.

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  13. CVE-2024-47696

    Élevée · CVSS 7.5EPSS 0,73%Correctif disponible

    RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency

    In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs"), the function flush_workqueue is invoked to flush the work queue iwcm_wq. But at that time, the work queue iwcm_wq was created via the function alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM. Because the current process is trying to flush the whole iwcm_wq, if iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current process is not reclaiming memory or running on a workqueue which doesn't have

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  14. CVE-2024-47695

    Critique · CVSS 9.8EPSS 0,69%Correctif disponible

    RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds

    In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds In the function init_conns(), after the create_con() and create_cm() for loop if something fails. In the cleanup for loop after the destroy tag, we access out of bound memory because cid is set to clt_path->s.con_num. This commits resets the cid to clt_path->s.con_num - 1, to stay in bounds in the cleanup loop later.

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  15. CVE-2024-47693

    Moyenne · CVSS 6.5EPSS 0,98%Correctif disponible

    IB/core: Fix ib_cache_setup_one error flow cleanup

    In the Linux kernel, the following vulnerability has been resolved: IB/core: Fix ib_cache_setup_one error flow cleanup When ib_cache_update return an error, we exit ib_cache_setup_one instantly with no proper cleanup, even though before this we had already successfully done gid_table_setup_one, that results in the kernel WARN below. Do proper cleanup using gid_table_cleanup_one before returning the err in order to fix the issue. WARNING: CPU: 4 PID: 922 at drivers/infiniband/core/cache.c:806 gid_table_release_one+0x181/0x1a0 Modules linked in: CPU: 4 UID: 0 PID: 922 Comm: c_repro Not tainted 6.11.0-rc1+ #3 Hardware name: QEMU Standard PC

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  16. CVE-2024-47692

    Moyenne · CVSS 6.5EPSS 1,16%Correctif disponible

    nfsd: return -EINVAL when namelen is 0

    In the Linux kernel, the following vulnerability has been resolved: nfsd: return -EINVAL when namelen is 0 When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  17. CVE-2024-47690

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    f2fs: get rid of online repaire on corrupted directory

    In the Linux kernel, the following vulnerability has been resolved: f2fs: get rid of online repaire on corrupted directory syzbot reports a f2fs bug as below: kernel BUG at fs/f2fs/inode.c:896! RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896 Call Trace: evict+0x532/0x950 fs/inode.c:704 dispose_list fs/inode.c:747 [inline] evict_inodes+0x5f9/0x690 fs/inode.c:797 generic_shutdown_super+0x9d/0x2d0 fs/super.c:627 kill_block_super+0x44/0x90 fs/super.c:1696 kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898 deactivate_locked_super+0xc4/0x130 fs/super.c:473 cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373 task_work_run+0x24f/0x310

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  18. CVE-2024-47685

    Critique · CVSS 9.1EPSS 1,37%Correctif disponible

    netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put() syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_i

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  19. CVE-2024-47684

    Élevée · CVSS 8.2EPSS 0,28%Correctif disponible

    tcp: check skb is non-NULL in tcp_rto_delta_us()

    In the Linux kernel, the following vulnerability has been resolved: tcp: check skb is non-NULL in tcp_rto_delta_us() We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel m

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour
  20. CVE-2024-47679

    Élevée · CVSS 7.8EPSS 0,2%Correctif disponible

    vfs: fix race between evice_inodes() and find_inode()&iput()

    In the Linux kernel, the following vulnerability has been resolved: vfs: fix race between evice_inodes() and find_inode()&iput() Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomi

    • Mettez à jour vers 5.15.0-1066.69~20.04.1
    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →