p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-ibm-5.15 · Page n° 89

Vulnérabilité publiée pour linux-ibm-5.15 au cours des 30 derniers jours : 0. Dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 2540

  1. CVE-2023-52878

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds

    In the Linux kernel, the following vulnerability has been resolved: can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds If the "struct can_priv::echoo_skb" is accessed out of bounds, this would cause a kernel crash. Instead, issue a meaningful warning message and return with an error.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  2. CVE-2023-52877

    Moyenne · CVSS 5.5EPSS 0,22%Correctif disponible

    usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()

    In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() It is possible that typec_register_partner() returns ERR_PTR on failure. When port->partner is an error, a NULL pointer dereference may occur as shown below. [91222.095236][ T319] typec port0: failed to register partner (-17) ... [91225.061491][ T319] Unable to handle kernel NULL pointer dereference at virtual address 000000000000039f [91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc [91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc [91225.308067][ T319] Call trace: [91225.308070][

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  3. CVE-2023-52876

    Moyenne · CVSS 5.5EPSS 0,22%Correctif disponible

    clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data

    In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  4. CVE-2023-52875

    Moyenne · CVSS 5.5EPSS 0,23%Correctif disponible

    clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data

    In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  5. CVE-2023-52873

    Moyenne · CVSS 5.5EPSS 0,22%Correctif disponible

    clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data

    In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  6. CVE-2023-52872

    Élevée · CVSS 7.8EPSS 0,18%Correctif disponible

    tty: n_gsm: fix race condition in status line change on dead connections

    In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix race condition in status line change on dead connections gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all timers, removing the virtual tty devices and clearing the data queues. This procedure, however, may cause subsequent changes of the virtual modem status lines of a DLCI. More data is being added the outgoing data queue and the deleted kick timer is restarted to handle this. At this point many resources have already been removed by the cleanup procedure. Thus, a kernel panic occurs. Fix this by proving in gsm_modem_update() that the

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  7. CVE-2023-52871

    Élevée · CVSS 7.1EPSS 0,23%Correctif disponible

    soc: qcom: llcc: Handle a second device without data corruption

    In the Linux kernel, the following vulnerability has been resolved: soc: qcom: llcc: Handle a second device without data corruption Usually there is only one llcc device. But if there were a second, even a failed probe call would modify the global drv_data pointer. So check if drv_data is valid before overwriting it.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  8. CVE-2023-52870

    Moyenne · CVSS 4.1EPSS 0,22%Correctif disponible

    clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data

    In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  9. CVE-2023-52869

    Moyenne · CVSS 5.5EPSS 0,22%Correctif disponible

    pstore/platform: Add check for kstrdup

    In the Linux kernel, the following vulnerability has been resolved: pstore/platform: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  10. CVE-2023-52868

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    thermal: core: prevent potential string overflow

    In the Linux kernel, the following vulnerability has been resolved: thermal: core: prevent potential string overflow The dev->id value comes from ida_alloc() so it's a number between zero and INT_MAX. If it's too high then these sprintf()s will overflow.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  11. CVE-2023-52865

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data

    In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  12. CVE-2023-52864

    Élevée · CVSS 7EPSS 0,27%Correctif disponible

    platform/x86: wmi: Fix opening of char device

    In the Linux kernel, the following vulnerability has been resolved: platform/x86: wmi: Fix opening of char device Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via file private data"), the miscdevice stores a pointer to itself inside filp->private_data, which means that private_data will not be NULL when wmi_char_open() is called. This might cause memory corruption should wmi_char_open() be unable to find its driver, something which can happen when the associated WMI device is deleted in wmi_free_devices(). Fix the problem by using the miscdevice pointer to retrieve the WMI device data associated with a char device usi

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  13. CVE-2023-52863

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    hwmon: (axi-fan-control) Fix possible NULL pointer dereference

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (axi-fan-control) Fix possible NULL pointer dereference axi_fan_control_irq_handler(), dependent on the private axi_fan_control_data structure, might be called before the hwmon device is registered. That will cause an "Unable to handle kernel NULL pointer dereference" error.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  14. CVE-2023-52859

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    perf: hisi: Fix use-after-free when register pmu fails

    In the Linux kernel, the following vulnerability has been resolved: perf: hisi: Fix use-after-free when register pmu fails When we fail to register the uncore pmu, the pmu context may not been allocated. The error handing will call cpuhp_state_remove_instance() to call uncore pmu offline callback, which migrate the pmu context. Since that's liable to lead to some kind of use-after-free. Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been failed to register.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  15. CVE-2023-52858

    Moyenne · CVSS 6.2EPSS 0,25%Correctif disponible

    clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data

    In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  16. CVE-2023-52856

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    drm/bridge: lt8912b: Fix crash on bridge detach

    In the Linux kernel, the following vulnerability has been resolved: drm/bridge: lt8912b: Fix crash on bridge detach The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle k

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  17. CVE-2023-52855

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency

    In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue(): spin_lock_irqsave(&hsotg->lock, flags); ... if (!urb->hcpriv) { dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); goto out; } rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv ... out: spin_unlock_irqrestore(&hsotg->lock, flags); When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are concurrently executed, the NULL chec

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  18. CVE-2023-52854

    Élevée · CVSS 7.8EPSS 0,24%Correctif disponible

    padata: Fix refcnt handling in padata_free_shell()

    In the Linux kernel, the following vulnerability has been resolved: padata: Fix refcnt handling in padata_free_shell() In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead to system UAF (Use-After-Free) issues. Due to the lengthy analysis of the pcrypt_aead01 function call, I'll describe the problem scenario using a simplified model: Suppose there's a user of padata named `user_function` that adheres to the padata requirement of calling `padata_free_shell` after `serial()` has been invoked, as demonstrated in the following code: ```c struct request { struct padata_priv padata; struct completion *done; }; void

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour
  19. CVE-2023-52853

    Moyenne · CVSS 5.5EPSS 0,24%Correctif disponible

    hid: cp2112: Fix duplicate workqueue initialization

    In the Linux kernel, the following vulnerability has been resolved: hid: cp2112: Fix duplicate workqueue initialization Previously the cp2112 driver called INIT_DELAYED_WORK within cp2112_gpio_irq_startup, resulting in duplicate initilizations of the workqueue on subsequent IRQ startups following an initial request. This resulted in a warning in set_work_data in workqueue.c, as well as a rare NULL dereference within process_one_work in workqueue.c. Initialize the workqueue within _probe instead.

    • Mettez à jour vers 5.15.0-1048.51~20.04.1
    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →