In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix deadlock in nilfs_count_free_blocks()
A semaphore deadlock can occur if nilfs_get_block() detects metadata
corruption while locating data blocks and a superblock writeback occurs at
the same time:
task 1 task 2
------ ------
* A file operation *
nilfs_truncate()
nilfs_get_block()
down_read(rwsem A) <--
nilfs_bmap_lookup_contig()
... generic_shutdown_super()
nilfs_put_super()
* Prep
btrfs: fix match incorrectly in dev_args_match_device
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix match incorrectly in dev_args_match_device
syzkaller found a failed assertion:
assertion failed: (args->devid != (u64)-1) || args->missing, in fs/btrfs/volumes.c:6921
This can be triggered when we set devid to (u64)-1 by ioctl. In this
case, the match of devid will be skipped and the match of device may
succeed incorrectly.
Patch 562d7b1512f7 introduced this function which is used to match device.
This function contains two matching scenarios, we can distinguish them by
checking the value of args->missing rather than check whether args->devid
and args->uuid
udf: Fix a slab-out-of-bounds write bug in udf_find_entry()
In the Linux kernel, the following vulnerability has been resolved:
udf: Fix a slab-out-of-bounds write bug in udf_find_entry()
Syzbot reported a slab-out-of-bounds Write bug:
loop0: detected capacity change from 0 to 2048
==================================================================
BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0
fs/udf/namei.c:253
Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610
CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/11/2022
Call Trace:
<TASK>
__dum
can: j1939: j1939_send_one(): fix missing CAN header initialization
In the Linux kernel, the following vulnerability has been resolved:
can: j1939: j1939_send_one(): fix missing CAN header initialization
The read access to struct canxl_frame::len inside of a j1939 created
skbuff revealed a missing initialization of reserved and later filled
elements in struct can_frame.
This patch initializes the 8 byte CAN header with zero.
In the Linux kernel, the following vulnerability has been resolved:
ASoC: core: Fix use-after-free in snd_soc_exit()
KASAN reports a use-after-free:
BUG: KASAN: use-after-free in device_del+0xb5b/0xc60
Read of size 8 at addr ffff888008655050 by task rmmod/387
CPU: 2 PID: 387 Comm: rmmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl+0x79/0x9a
print_report+0x17f/0x47b
kasan_report+0xbb/0xf0
device_del+0xb5b/0xc60
platform_device_del.part.0+0x24/0x200
platform_device_unregister+0x2e/0x40
snd_soc_exit+0xa/0x22 [snd_soc_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_S
In the Linux kernel, the following vulnerability has been resolved:
serial: imx: Add missing .thaw_noirq hook
The following warning is seen with non-console UART instance when
system hibernates.
[ 37.371969] ------------[ cut here ]------------
[ 37.376599] uart3_root_clk already disabled
[ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
...
[ 37.506986] Call trace:
[ 37.509432] clk_core_disable+0xa4/0xb0
[ 37.513270] clk_disable+0x34/0x50
[ 37.516672] imx_uart_thaw+0x38/0x5c
[ 37.520250] platform_pm_thaw+0x30/0x6c
[ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4
[ 37.5289
bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
We got a syzkaller problem because of aarch64 alignment fault
if KFENCE enabled. When the size from user bpf program is an odd
number, like 399, 407, etc, it will cause the struct skb_shared_info's
unaligned access. As seen below:
BUG: KFENCE: use-after-free read in __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032
Use-after-free read at 0xffff6254fffac077 (in kfence-#213):
__lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline]
arch_atomic_add arch/arm64/include/asm/atomic.h:28 [inline]
ar
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
If transport_add_device() fails in sas_phy_add(), the kernel will crash
trying to delete the device in transport_remove_device() called from
sas_remove_host().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_d
sctp: clear out_curr if all frag chunks of current msg are pruned
In the Linux kernel, the following vulnerability has been resolved:
sctp: clear out_curr if all frag chunks of current msg are pruned
A crash was reported by Zhen Chen:
list_del corruption, ffffa035ddf01c18->next is NULL
WARNING: CPU: 1 PID: 250682 at lib/list_debug.c:49 __list_del_entry_valid+0x59/0xe0
RIP: 0010:__list_del_entry_valid+0x59/0xe0
Call Trace:
sctp_sched_dequeue_common+0x17/0x70 [sctp]
sctp_sched_fcfs_dequeue+0x37/0x50 [sctp]
sctp_outq_flush_data+0x85/0x360 [sctp]
sctp_outq_uncork+0x77/0xa0 [sctp]
sctp_cmd_interpreter.constprop.0+0x164/0x1450 [sctp]
sctp_side_effects+0x37/0xe0 [sctp]
sctp_do_sm+0x
siox: fix possible memory leak in siox_device_add()
In the Linux kernel, the following vulnerability has been resolved:
siox: fix possible memory leak in siox_device_add()
If device_register() returns error in siox_device_add(),
the name allocated by dev_set_name() need be freed. As
comment of device_register() says, it should use put_device()
to give up the reference in the error path. So fix this
by calling put_device(), then the name can be freed in
kobject_cleanup(), and sdevice is freed in siox_device_release(),
set it to null in error path.
ALSA: hda: fix potential memleak in 'add_widget_node'
In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: fix potential memleak in 'add_widget_node'
As 'kobject_add' may allocated memory for 'kobject->name' when return error.
And in this function, if call 'kobject_add' failed didn't free kobject.
So call 'kobject_put' to recycling resources.
nilfs2: fix use-after-free bug of ns_writer on remount
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix use-after-free bug of ns_writer on remount
If a nilfs2 filesystem is downgraded to read-only due to metadata
corruption on disk and is remounted read/write, or if emergency read-only
remount is performed, detaching a log writer and synchronizing the
filesystem can be done at the same time.
In these cases, use-after-free of the log writer (hereinafter
nilfs->ns_writer) can happen as shown in the scenario below:
Task1 Task2
-------------------------------- ------------------------------
nilfs_construct_segment
nilfs_segctor
pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
Here is the BUG report by KASAN about null pointer dereference:
BUG: KASAN: null-ptr-deref in strcmp+0x2e/0x50
Read of size 1 at addr 0000000000000000 by task python3/2640
Call Trace:
strcmp
__of_find_property
of_find_property
pinctrl_dt_to_map
kasprintf() would return NULL pointer when kmalloc() fail to allocate.
So directly return ENOMEM, if kasprintf() return NULL pointer.
btrfs: zoned: initialize device's zone info for seeding
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: initialize device's zone info for seeding
When performing seeding on a zoned filesystem it is necessary to
initialize each zoned device's btrfs_zoned_device_info structure,
otherwise mounting the filesystem will cause a NULL pointer dereference.
This was uncovered by fstests' testcase btrfs/163.
drm/drv: Fix potential memory leak in drm_dev_init()
In the Linux kernel, the following vulnerability has been resolved:
drm/drv: Fix potential memory leak in drm_dev_init()
drm_dev_init() will add drm_dev_init_release() as a callback. When
drmm_add_action() failed, the release function won't be added. As the
result, the ref cnt added by device_get() in drm_dev_init() won't be put
by drm_dev_init_release(), which leads to the memleak. Use
drmm_add_action_or_reset() instead of drmm_add_action() to prevent
memleak.
unreferenced object 0xffff88810bc0c800 (size 2048):
comm "modprobe", pid 8322, jiffies 4305809845 (age 15.292s)
hex dump (first 32 bytes):
e8 cc c0 0b 81 88 ff ff ff ff ff f
In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: don't delete error page from pagecache
This change is very similar to the change that was made for shmem [1], and
it solves the same problem but for HugeTLBFS instead.
Currently, when poison is found in a HugeTLB page, the page is removed
from the page cache. That means that attempting to map or read that
hugepage in the future will result in a new hugepage being allocated
instead of notifying the user that the page was poisoned. As [1] states,
this is effectively memory corruption.
The fix is to leave the page in the page cache. If the user attempts to
use
drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker()
In the Linux kernel, the following vulnerability has been resolved:
drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker()
drm_vblank_init() call drmm_add_action_or_reset() with
drm_vblank_init_release() as action. If __drmm_add_action() failed, will
directly call drm_vblank_init_release() with the vblank whose worker is
NULL. As the resule, a null-ptr-deref will happen in
kthread_destroy_worker(). Add the NULL check before calling
drm_vblank_destroy_worker().
BUG: null-ptr-deref
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 5 PID: 961 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf-dirty
RIP: 0
ata: libata-transport: fix double ata_host_put() in ata_tport_add()
In the Linux kernel, the following vulnerability has been resolved:
ata: libata-transport: fix double ata_host_put() in ata_tport_add()
In the error path in ata_tport_add(), when calling put_device(),
ata_tport_release() is called, it will put the refcount of 'ap->host'.
And then ata_host_put() is called again, the refcount is decreased
to 0, ata_host_release() is called, all ports are freed and set to
null.
When unbinding the device after failure, ata_host_stop() is called
to release the resources, it leads a null-ptr-deref(), because all
the ports all freed and null.
Unable to handle kernel NULL pointer dereference at virtual address 0
ata: libata-transport: fix error handling in ata_tport_add()
In the Linux kernel, the following vulnerability has been resolved:
ata: libata-transport: fix error handling in ata_tport_add()
In ata_tport_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 12 PID: 13605 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #8
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39