net: bridge: mcast: wait for previous gc cycles when removing port
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: wait for previous gc cycles when removing port
syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running
Make sure all previous gc cycles have finished by using flus
gpio: prevent potential speculation leaks in gpio_device_get_desc()
In the Linux kernel, the following vulnerability has been resolved:
gpio: prevent potential speculation leaks in gpio_device_get_desc()
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Securi
md/raid5: avoid BUG_ON() while continue reshape after reassembling
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
re
drm/amdgpu/pm: Fix the null pointer dereference for smu7
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: Fix the null pointer dereference for smu7
optimize the code to avoid pass a null pointer (hwmgr->backend)
to function smu7_update_edc_leakage_table.
drm/amdgpu: Fix the null pointer dereference to ras_manager
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix the null pointer dereference to ras_manager
Check ras_manager before using it
drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules
Check the pointer value to fix potential null pointer
dereference
drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr
Check return value and conduct null pointer handling to avoid null pointer dereference.
drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing
This commit adds null checks for the 'stream' and 'plane' variables in
the dcn30_apply_idle_power_optimizations function. These variables were
previously assumed to be null at line 922, but they were used later in
the code without checking if they were null. This could potentially lead
to a null pointer dereference, which would cause a crash.
The null checks ensure that 'stream' and 'plane' are not null before
they are used, preventing potential crashes.
Fixes the below static smatch checker:
d
drm/amd/display: Add null checker before passing variables
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null checker before passing variables
Checks null pointer before passing variables to functions.
This fixes 3 NULL_RETURNS issues reported by Coverity.
media: xc2028: avoid use-after-free in load_firmware_cb()
In the Linux kernel, the following vulnerability has been resolved:
media: xc2028: avoid use-after-free in load_firmware_cb()
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tun
drm/client: fix null pointer dereference in drm_client_modeset_probe
In the Linux kernel, the following vulnerability has been resolved:
drm/client: fix null pointer dereference in drm_client_modeset_probe
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is
assigned to modeset->mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
serial: core: check uartclk for zero to avoid divide by zero
In the Linux kernel, the following vulnerability has been resolved:
serial: core: check uartclk for zero to avoid divide by zero
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
memcg: protect concurrent access to mem_cgroup_idr
In the Linux kernel, the following vulnerability has been resolved:
memcg: protect concurrent access to mem_cgroup_idr
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against co
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix overflow in get_free_elt()
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a
padata: Fix possible divide-by-0 panic in padata_mt_helper()
In the Linux kernel, the following vulnerability has been resolved:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.
[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.0
Bluetooth: MGMT: Add error handling to pair_device()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Add error handling to pair_device()
hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.
Fixed by adding error handling in the function.
usb: vhci-hcd: Do not drop references before new references are gained
In the Linux kernel, the following vulnerability has been resolved:
usb: vhci-hcd: Do not drop references before new references are gained
At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.
In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential context UAFs
gem_context_register() makes the context visible to userspace, and which
point a separate thread can trigger the I915_GEM_CONTEXT_DESTROY ioctl.
So we need to ensure that nothing uses the ctx ptr after this. And we
need to ensure that adding the ctx to the xarray is the *last* thing
that gem_context_register() does with the ctx pointer.
[tursulin: Stable and fixes tags add/tidy.]
(cherry picked from commit bed4b455cf5374e68879be56971c1da563bcd90c)
In the Linux kernel, the following vulnerability has been resolved:
iommu/iova: Fix alloc iova overflows issue
In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.
This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
ex