drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not
set, a drm_pending_vblank_event will be allocated. If later, there is an
allocation failure or another failure at setup_out_fence(), that event
will not have base.fence set and it will not be released at
complete_signaling().
Release the event and set crtc_state->event to NULL just like in the
DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at
drm_event_reserve_init(). That is, prepare_signaling() releases the
event and there is
smb: client: validate absolute native symlink targets before NT fixups
In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate absolute native symlink targets before NT fixups
With symlinkroot unset, an absolute target is copied without conversion
to an NT drive path. Later code still assumes an NT prefix is present
when modifying the target and calculating the print name length.
For "/ab", this causes two failures: sym[5] and path[5] are written
past their allocations, and plen -= 2 * poff subtracts an assumed
8-byte prefix from a 6-byte UTF-16 target, wrapping u16 plen to 65534.
That underflow causes another overflow: memcpy() copies 65534 bytes
into a 24-byte buffer. A use
neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.
In the Linux kernel, the following vulnerability has been resolved:
neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.
NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses
.validation_type, so no validation is applied:
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is
silently cast to u32, so a larger value can bypass the min
ALSA: bcd2000: Fix race between rawmidi and disconnect
In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix race between rawmidi and disconnect
Although we tried to fix the potential UAF issues at USB disconnect on
bcd2000 driver, there is still an overlooked case -- namely, when a
rawmidi trigger callback has been already running at USB disconnect
handling, the in-flight function (e.g. bcd2000_midi_send()) could
still access the URB, because the previous URB NULL-check & clearance
was considered only for the URB complete callbacks, but not about the
parallel rawmidi operations.
For addressing the race, this patch introduced a new spinlock that
covers each raw
ntfs: protect runlist updates with the runlist lock
In the Linux kernel, the following vulnerability has been resolved:
ntfs: protect runlist updates with the runlist lock
ntfs_non_resident_attr_shrink() calls runlist helpers that require the
runlist write lock, but did not hold it while freeing clusters and
truncating the runlist. Serialize those operations and the resident
conversion with the runlist lock.
ntfs_attr_map_cluster() can merge a newly allocated run before updating
mapping pairs. If the update fails, free the clusters and restore both
the in-memory runlist and on-disk mapping pairs from a saved runlist.
Mark the volume in error if either rollback step fails.
ALSA: pcm: set timer->private_data before registering the PCM timer
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: set timer->private_data before registering the PCM timer
snd_pcm_timer_init() calls snd_device_register() to link the new
struct snd_timer into the global timer list while it still carries
hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop),
and only afterwards sets timer->private_data = substream.
Once the timer is on the list under register_mutex, a concurrent
reader can already reach it through the same mutex and invoke these
callbacks. /proc/asound/timers does this via c_resolution(), and
snd_timer_open()+snd_timer_start() reach start()/stop()
drm/msm/dp: skip PUSH_IDLE when the link was never enabled
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: skip PUSH_IDLE when the link was never enabled
msm_dp_display_atomic_enable() returns early when link training fails,
leaving ->power_on false and the main link down.
msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE
and waits for an idle-pattern completion that cannot arrive, so every failed
enable is followed by "PUSH_IDLE pattern timedout".
Every other step of the teardown is already gated on that flag:
msm_dp_display_disable(), called from .atomic_post_disable(), returns early
on !power_on. The PUSH_IDLE write is the only one that
ALSA: 6fire: fix OOB write from device-reported iso length
In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix OOB write from device-reported iso length
usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as
(actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where
actual_length is the unsigned length the device reported for the matching
IN packet. A packet completed with status 0 and actual_length < 4 wraps
the subtraction to 0x7fffffec; a zero-length isochronous packet is legal
on the bus, and the preceding loop rejects only non-zero status. The sum
reaches memset() on out_urb->buffer, a 4832-byte object from
kcalloc(PCM_MAX_PACK
wifi: virt_wifi: don't transfer operstate before register
In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: don't transfer operstate before register
virt_wifi_newlink() calls netif_stacked_transfer_operstate() before
register_netdevice(). If the lower device is dormant, that queues the
new netdev on lweventlist while it is still uninitialized. If
registration fails after that, for example because of an invalid name
such as "bad/name", free_netdev() immediately frees the object. A
later linkwatch_fire_event() then use-after-frees the list entry.
Move the transfer to after netdev_upper_dev_link(), as macvlan and
ipvlan already do.
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/
drm/vc4: Use managed KMS polling to fix UAF on unbind
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use d
ALSA: hda: trace PCM open only after assigning a stream
In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: trace PCM open only after assigning a stream
Stream assignment can fail when hardware streams are exhausted.
Move the tracepoint after the NULL check because its payload accesses
the assigned stream tag.
Detected by static analysis and reviewed with AI-assisted source auditing.
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
When mac80211 removes a sta, it calls .sta_state() which in turn calls
ath11k_mac_station_remove(). In that function we clean up both peers &
arsta related resources.
But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which
assumes that all driver related resources are cleaned up beforehand. This
cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not
in fact free arsta->rx_stats / tx_stats.
Extract the arsta cleanup from ath11k_mac_station_remove() into a
new ath11k_mac_station
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
In the Linux kernel, the following vulnerability has been resolved:
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
When an SRv6 packet arrives on an interface enslaved to a VRF,
vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate()
has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the
common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of
a reassembled outer packet could even set it, with no VRF involved.
Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP
decapsulation") then made the unreliable bit reliably clear.
The effect of the missing flag is visible with End.
net: dsa: mxl862xx: disable the stats poll on teardown
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: disable the stats poll on teardown
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll
net: bcmgenet: restore the hardware filters on open
In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: restore the hardware filters on open
bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops
every rule off the list, and bcmgenet_open() calls it on each ifup. Every
rule the user configured is silently lost:
# ethtool -N eth0 flow-type ether dst $MAC action 0
Added rule with ID 0
# ethtool -n eth0 | grep -c Filter:
1
# ip link set eth0 down && ip link set eth0 up
# ethtool -n eth0 | grep -c Filter:
0
Initialise the lists once at probe and restore the rules on open, as
bcmgenet_resume() already does.
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering
net: fddi: skfp: fix NULL deref when setting the MAC address while down
In the Linux kernel, the following vulnerability has been resolved:
net: fddi: skfp: fix NULL deref when setting the MAC address while down
skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without
checking netif_running(). ResetAdapter() first calls card_stop(), which
sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(),
which walks the two transmit queues:
for (i = QUEUE_S; i <= QUEUE_A0; i++) {
queue = smc->hw.fp.tx[i] ;
...
t = queue->tx_curr_get ;
smc->hw.fp.tx[] is only populated by init_tx(), which is reached from
skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() ->
init_mac()
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferre
tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().
In the Linux kernel, the following vulnerability has been resolved:
tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().
tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for
TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around
sk->sk_forward_alloc").
However, there is still a small race window between tcp_v6_rcv()
and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN
to TCP_CLOSE, causing skb_clone_and_charge_r() to be called
locklessly and resulting in the splat below. [0]
Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well.
This is fine for non-listeners becau