tipc: wait and exit until all work queues are done
In the Linux kernel, the following vulnerability has been resolved:
tipc: wait and exit until all work queues are done
On some host, a crash could be triggered simply by repeating these
commands several times:
# modprobe tipc
# tipc bearer enable media udp name UDP1 localip 127.0.0.1
# rmmod tipc
[] BUG: unable to handle kernel paging request at ffffffffc096bb00
[] Workqueue: events 0xffffffffc096bb00
[] Call Trace:
[] ? process_one_work+0x1a7/0x360
[] ? worker_thread+0x30/0x390
[] ? create_worker+0x1a0/0x1a0
[] ? kthread+0x116/0x130
[] ? kthread_flush_work_fn+0x10/0x10
[] ? ret_from_fork+0x35/0x40
When remo
tipc: skb_linearize the head skb when reassembling msgs
In the Linux kernel, the following vulnerability has been resolved:
tipc: skb_linearize the head skb when reassembling msgs
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by ps
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the
error handling path of the probe function, as already done in the remove
function
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mt7530: fix VLAN traffic leaks
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:
ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other
As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: fix a crash if ->get_sset_count() fails
If ds->ops->get_sset_count() fails then it "count" is a negative error
code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative
error code is type promoted to a very high value and the loop will
corrupt memory until the system crashes.
Fix this by checking for error codes and changing the type of "i" to
just int.
i2c: i801: Don't generate an interrupt on bus reset
In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Don't generate an interrupt on bus reset
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b3
net: fec: fix the potential memory leak in fec_enet_init()
In the Linux kernel, the following vulnerability has been resolved:
net: fec: fix the potential memory leak in fec_enet_init()
If the memory allocated for cbd_base is failed, it should
free the memory allocated for the queues, otherwise it causes
memory leak.
And if the memory allocated for the queues is failed, it can
return error directly.
In the Linux kernel, the following vulnerability has been resolved:
net: fujitsu: fix potential null-ptr-deref
In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer
deref. To fix this, check the return value of ioremap and return -1
to the caller in case of failure.
In the Linux kernel, the following vulnerability has been resolved:
mld: fix panic in mld_newpack()
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().
Test commands:
ip netns del A
ip netns del B
ip netns add A
ip netns add B
ip link add veth0 type veth peer name veth1
ip link set veth0 netns A
ip link set veth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set veth0 up
ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set lo up
ip n
In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not BUG_ON in link_to_fixup_dir
While doing error injection testing I got the following panic
kernel BUG at fs/btrfs/tree-log.c:1862!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:link_to_fixup_dir+0xd5/0xe0
RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216
RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0
RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000
RBP: ffff8f5953af9450 R08:
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix a use-after-free
looks like we forget to set ttm->sg to NULL.
Hit panic below
[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751] sg_free_table+0x17/0x20
[ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm]
[
In the Linux kernel, the following vulnerability has been resolved:
gve: Add NULL pointer checks when freeing irqs.
When freeing notification blocks, we index priv->msix_vectors.
If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors)
this could lead to a NULL pointer dereference if the driver is unloaded.
cxgb4: avoid accessing registers when clearing filters
In the Linux kernel, the following vulnerability has been resolved:
cxgb4: avoid accessing registers when clearing filters
Hardware register having the server TID base can contain
invalid values when adapter is in bad state (for example,
due to AER fatal error). Reading these invalid values in the
register can lead to out-of-bound memory access. So, fix
by using the saved server TID base when clearing filters.
In the Linux kernel, the following vulnerability has been resolved:
net: lantiq: fix memory corruption in RX ring
In a situation where memory allocation or dma mapping fails, an
invalid address is programmed into the descriptor. This can lead
to memory corruption. If the memory allocation fails, DMA should
reuse the previous skb and mapping and drop the packet. This patch
also increments rx drop counter.
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.
Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since
7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set
element timeout").
Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.
According
netfilter: nf_tables: disallow anonymous set with timeout flag
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: disallow anonymous set with timeout flag
Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.
netfilter: nf_tables: disallow timeout for anonymous sets
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: disallow timeout for anonymous sets
Never used from userspace, disallow these parameters.
ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
syzbot found __ip6_tnl_rcv() could access unitiliazed data [1].
Call pskb_inet_may_pull() to fix this, and initialize ipv6h
variable after this call as it can change skb->head.
[1]
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_
In the Linux kernel, the following vulnerability has been resolved:
tcp: add sanity checks to rx zerocopy
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.
This patch adds to can_map_frag() these additional checks:
- Page must not be a compound one.
- page->mapping must be NULL.
This fixes the panic reported by ZhangPeng.
syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.
r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0