apparmor: fix out-of-bounds write when null terminating a label vec
In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix out-of-bounds write when null terminating a label vec
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES poi
mm/kmemleak: avoid soft lockup when scanning task stacks
In the Linux kernel, the following vulnerability has been resolved:
mm/kmemleak: avoid soft lockup when scanning task stacks
Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3.
kmemleak_scan() scans every task stack under one rcu_read_lock() with no
reschedule point, which can trip the soft lockup watchdog on hosts with
very many threads.
That prints the following message, depending on the workload+host
configuration:
watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
scan_block
kmemleak_scan
kmemleak_scan_thread
kthread
Patch 1 walks the tasks with find_ge_pid() so the
mm/mglru: fix and remove redundant unevictable folio handling
In the Linux kernel, the following vulnerability has been resolved:
mm/mglru: fix and remove redundant unevictable folio handling
sort_folio() has a shortcut for moving folios that are no longer evictable
but are still sitting on a generation list. However, this shortcut is
buggy. It does not follow the PG_lru usage convention, and it has a more
serious issue.
Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that
folio->lru can be reused to hold folio->mlock_count (see the comment in
lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them,
and every other place that turns a folio unevictable initialises
m
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
In the Linux kernel, the following vulnerability has been resolved:
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
migrate_pages_batch() unmaps each folio before moving it, and every
unmap runs the mmu_notifier invalidate callbacks. On KVM hosts
try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() ->
tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps
the CPU busy for a long time.
The loop already calls cond_resched(), but on PREEMPTION kernels that is
a no-op, and involuntary preemption is not a Tasks-RCU quiescent state.
A long batch therefore never reports a quiescent stat
mm/migrate_device: clear stale mapping after freeing swapcache
In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains t
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
I am seeing some rcu_tasks stalls in the Meta fleet during reclaim.
INFO: rcu_tasks detected stalls on tasks:
0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8
task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552
Call Trace:
shrink_lruvec
mem_cgroup_iter
shrink_node
do_try_to_free_pages
try_to_free_pages
__alloc_frozen_pages_noprof
alloc_pages_noprof
pte_alloc_one
__pte_alloc
handle_mm_fault
Nothing promises direct reclaim returns in bounded ti
mm: memcg: stop reclaim when a limit update is superseded
In the Linux kernel, the following vulnerability has been resolved:
mm: memcg: stop reclaim when a limit update is superseded
kernfs serializes file operations only per open file, so separate open
files can update the same memory.high or memory.max file concurrently.
Both handlers store the new limit before synchronous reclaim, but continue
to use the writer's local target in the reclaim loop. If another writer
raises or removes the limit, the first writer can continue reclaiming
toward a stale target.
For memory.max, this can leave the writer looping indefinitely once
reclaim retries are exhausted. The OOM path sees sufficient margin u
In the Linux kernel, the following vulnerability has been resolved:
x86/tdx: Fix off-by-one in port I/O handling
handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use:
u64 mask = GENMASK(BITS_PER_BYTE * size, 0);
GENMASK(h, l) includes bit h. For size=1 (INB), this produces
GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8
bits). The mask is one bit too wide for all I/O sizes.
Fix the mask calculation.
tracing/user_events: Clear copied tracing state before fork duplication
In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Clear copied tracing state before fork duplication
dup_task_struct() copies user_event_mm from the parent into the child,
without grabbing a reference to it. user_event_mm_dup() should
replace it, but it leaves that copied pointer unmodified if
user_event_mm_alloc() fails.
When the child exits, user_event_mm_remove() decrements a reference
the child never owned, which ultimately frees user_event_mm, while
the parent still as a stale pointer to it. This creates a UAF, which
KASAN reports as:
BUG: KASAN: slab-use-after-free in
current_user_event
tracing: Fix crash passing ERR_PTR to kthread_stop()
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash passing ERR_PTR to kthread_stop()
event_test_stuff() calls kthread_run() and unconditionally passes the
returned task_struct pointer to kthread_stop(). kthread_run() returns an
error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for
example under memory pressure during the boot-time event self-test.
kthread_stop() then dereferences the invalid pointer, crashing the kernel.
Check the result of kthread_run() before passing it to kthread_stop(). Use
WARN_ON() so that a failure to create the self-test thread does not go
unnoticed, matching th
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(),
which frees every sub-buffer of the ring buffer, including the reader
page, and replaces them with newly allocated ones.
Readers of trace_pipe hold pointers into those pages. ring_buffer_peek()
looks up an event under cpu_buffer->reader_lock but returns the event
pointer after dropping the lock, and peek_next_entry() then calls
ring_buffer_event_length() and ring_buffer_event_data() on it. If the
sub-buffer order is changed in tha
tracing: Fix use-after-free with same-name named triggers
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free with same-name named triggers
When two hist triggers on different events are registered with the same
name=, the second one reuses the first as named_data. Both are added to
tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(),
because save_hist_vars() is called before event_trigger_register() while
the named reuse is only detected later, in hist_register_trigger().
In the named-data branch hist_register_trigger() then frees the second
histogram's hist_data via destroy_hist_data(), but never removes its
tr->hist_vars list entry,
device property: fix infinite loop in fwnode_for_each_child_node()
In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwn
misc: nsm: bound the device-reported response length
In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: bound the device-reported response length
nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported
by the NSM device into msg->resp.len without bounding it to the response
buffer. A malicious or buggy backend can report a length larger than the
response buffer; parse_resp_raw() then copies that many bytes out of the
fixed buffer to user space, disclosing adjacent kernel heap (an
out-of-bounds read). The request path already floors its length in
fill_req_raw(); the response path lacks the symmetric check.
Clamp the stored length to the size of the
rapidio: mport_cdev: fix use-after-free in dma_req_free()
In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in dma_req_free()
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO m
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not re
In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addi
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or wo
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound
card teardown and immediately frees the underlying struct snd_uac_chip
context. However, snd_card_free_when_closed() returns asynchronously
while ALSA control elements (kctls) remain open in userspace.
When userspace control applications access or close these open file
descriptors, kctl callbacks attempt to dereference kctl->private_data
pointing to &uac->c_prm or &uac->p_prm within the freed uac structure,
resulting in a use-after-free
usb: gadget: midi2: remove default configfs groups on teardown
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: remove default configfs groups on teardown
f_midi2_alloc_inst() creates default configfs child groups for the
default endpoint and default block using configfs_add_default_group(),
setting their internal refcount to 1.
However, during function teardown in f_midi2_free_inst() or EP cleanup
in f_midi2_ep_opts_release(), configfs_remove_default_groups() is
never called, therefore never dropping the refcount and leaking struct
f_midi2_ep_opts and f_midi2_block_opts.
Add the missing configfs_remove_default_groups() in the afformentioned
functions to free th