dm-ioctl: fix a possible overflow in list_version_get_info
In the Linux kernel, the following vulnerability has been resolved:
dm-ioctl: fix a possible overflow in list_version_get_info
sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the
output buffer - info->vers->version[0], info->vers->version[1],
info->vers->version[2] and info->vers->next. This can cause buffer
overflow.
Fix this buffer overflow by replacing "sizeof(tt->version)" with
"sizeof(struct dm_target_versions)".
dm-log: fix a bitset_size overflow on 32bit machines
In the Linux kernel, the following vulnerability has been resolved:
dm-log: fix a bitset_size overflow on 32bit machines
Commit c20e36b7631d ("dm log: fix out-of-bounds write due to
region_count overflow") made sure that region_count could fit in an
unsigned int. But the bitmap memory isn't allocated based on
region_count. It uses bitset_size (a size_t variable). The first step of
calculating bitset_size is to set it to region_count, rounded up to a
multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG
smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit
architecture, this will make bitset_size wrap around to 0 a
dm_early_create: fix freeing used table on dm_resume failure
In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case.
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: don't increment hash_offset twice
hash_offset is already incremented in the loop "for (i = 0; i < to_copy;
i++, ts--)". Do not increment it again.
In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix buffer overflow in FEC calculation
There's a buffer overflow in dm-verity-fec:
if (neras && *neras <= v->fec->roots)
fio->erasures[(*neras)++] = i;
This allows *neras to reach roots + 1 (the post-increment pushes it past
roots). This value is then passed as no_eras to decode_rs8(). Inside the
RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator
polynomial loop writes lambda[j] where j can reach nroots + 1 — one
element past the end of lambda[] (which is sized nroots + 1, valid
indices 0..nroots). The out-of-bounds write lands on syn[0], c
dm-verity: fix a possible NULL pointer dereference
In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix a possible NULL pointer dereference
Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted
if the device has no table.
In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races.
accel/ivpu: Reject firmware log with size smaller than header
In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Reject firmware log with size smaller than header
fw_log_from_bo() validates the tracing buffer header_size and that the
log fits within the BO, but never checks that log->size is at least
log->header_size. fw_log_print_buffer() then computes:
u32 data_size = log->size - log->header_size;
which underflows to a near-U32_MAX value when firmware reports a log whose
size is smaller than its header. That huge data_size defeats the
log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu:
Add bounds checks for firmware log indices"), so fw_log_pri
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
In the Linux kernel, the following vulnerability has been resolved:
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
If phys_disk->in_reset is set, the function returns directly without
undoing the resources acquired for the command. Add the missing error
cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping
the SCSI command, and dropping the outstanding IOACCEL command count
before returning.
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use.
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsiback_device_action() obtains a command tag in
scsiback_get_pend_req() and submits a task-management request with
target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and
scsiback jumps to the err: label, which sends a response but frees
nothing, leaking the tag.
Impact: a pvSCSI guest can leak the command tags of a LUN's session,
stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests
whenever target_submit_tmr() fails.
transport_generic_free_cmd() cannot be used here.
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend
whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0;
the se_cmd is initialised (kref_init() via target_init_cmd()) only
later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB
path. The two error paths in scsiback_do_cmd_fn() taken before the
command is submitted -- a failed scsiback_gnttab_data_map() and an
unknown ring_req.act -- call
transport_generic_free_cmd(&pending_req->se_cmd, 0), which kr
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" subs
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_al
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
block
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path.
Input: ims-pcu - fix use-after-free and double-free in disconnect
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix use-after-free and double-free in disconnect
ims_pcu_disconnect() only intended to perform cleanup when the primary
(control) interface is unbound. However, it currently relies on the
interface class to distinguish between control and data interfaces.
A malicious device could present a data interface with the same class
as the control interface, leading to premature cleanup and potential
use-after-free or double-free.
Switch to verifying that the interface being disconnected is indeed
the control interface.
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - validate control endpoint type
The driver currently assumes that the first endpoint of the control
interface is an interrupt IN endpoint without verifying it. A malicious
device could provide a different endpoint type, which would then be
passed to usb_fill_int_urb(), potentially leading to kernel warnings
or undefined behavior.
Verify that the control endpoint is an interrupt IN endpoint.
Input: ims-pcu - fix firmware leak in async update
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix firmware leak in async update
The firmware object was not being released if validation failed.
Use __free(firmware) to ensure the firmware is always released.
Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging
The debug logging in ims_pcu_irq() unconditionally prints data from
pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the
actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the
control URB exceeds pcu->max_in_size, this leads to an out-of-bounds
read.
Fix this by printing from the correct buffer associated with the URB.