p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-hwe-6.8 · Page n° 161

Vulnérabilités publiées pour linux-hwe-6.8 au cours des 30 derniers jours : 796. Présentes dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 9836

  1. CVE-2026-68427

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    gpu: host1x: Fix use-after-free in host1x_bo_clear_cached_mappings

    In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix use-after-free in host1x_bo_clear_cached_mappings __host1x_bo_unpin() drops the last reference to the mapping and frees it, so we can't dereference mapping afterwards. The cache itself outlives the mapping, so use the cache local variable instead.

    Publication Mise à jour
  2. CVE-2026-68426

    Critique · CVSS 9.8EPSS 0,5%Aucun correctif publié

    xfrm: fix stale skb->prev after async crypto steals a GSO segment

    In the Linux kernel, the following vulnerability has been resolved: xfrm: fix stale skb->prev after async crypto steals a GSO segment skb_gso_segment() leaves the segment list head with ->prev pointing at the last segment, an invariant validate_xmit_skb_list() relies on when it sets its tail pointer (tail = skb->prev). When validate_xmit_xfrm() walks a GSO list and some segments are stolen by async crypto (->xmit() returns -EINPROGRESS), those segments are unlinked from the list but the head ->prev is never updated. If the last segment is the one stolen, the returned head still has ->prev pointing at it, even though it is now owned by the

    Publication Mise à jour
  3. CVE-2026-68425

    Élevée · CVSS 7.1EPSS 0,26%Aucun correctif publié

    IB/mad: Drop unmatched RMPP responses before reassembly

    In the Linux kernel, the following vulnerability has been resolved: IB/mad: Drop unmatched RMPP responses before reassembly Kernel-handled RMPP receive processing starts reassembly for active DATA responses before the response is matched to an outstanding send. The normal match happens later, after ib_process_rmpp_recv_wc() has either assembled a complete message or consumed the segment. That ordering lets an unsolicited response that routes to a kernel RMPP agent by the high TID bits allocate or extend RMPP receive state before the full TID and source address are checked against a real request. A reordered burst can therefore reach the re

    Publication Mise à jour
  4. CVE-2026-68422

    Non évaluéeEPSS 0,21%Aucun correctif publié

    btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots()

    In the Linux kernel, the following vulnerability has been resolved: btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots() If we have an unexpected reloc_root for our root, we jump to the out label but never drop the reference we obtained for root, resulting in a leak. Add a missing btrfs_put_root() call.

    Publication Mise à jour
  5. CVE-2026-68419

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    RDMA/irdma: Prevent rereg_mr for non-mem regions

    In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent rereg_mr for non-mem regions When a QP/CQ/SRQ is created, a two step process is used where the buffer is allocated in userspace and explicitly registered with the normal reg_mr mechanism prior to creating the actual QP/CQ/SRQ object. These special registrations are indicated via an ABI field so the driver knows that they do not have a valid mkey and to skip the actual CQP command submission. Since these are real MR objects from the core's perspective, it is possible for a user application to invoke rereg_mr on them and cause a real CQP op to be emitted

    Publication Mise à jour
  6. CVE-2026-68418

    Moyenne · CVSS 6.8EPSS 0,16%Aucun correctif publié

    RDMA/irdma: Prevent user-triggered null deref on QP create

    In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent user-triggered null deref on QP create Previously, the user QP creation path would only attempt to populate iwqp->iwpbl if the user-provided req.user_wqe_bufs field was non-zero. The problem is that iwqp->iwpbl is unconditionally dereferenced later on in irdma_setup_virt_qp. While there was a check for iwqp->iwpbl != NULL, this check would only occur if req.user_wqe_bufs was non-zero. The end result is that a user could send a zero user_wqe_bufs value and trigger a null ptr deref. Fix this by unconditionally calling irdma_get_pbl and bailing if it fail

    Publication Mise à jour
  7. CVE-2026-68417

    Élevée · CVSS 7.8EPSS 0,1%Aucun correctif publié

    RDMA/siw: publish QP after initialization

    In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: publish QP after initialization siw_create_qp() currently calls siw_qp_add() before the queues, CQ pointers, state, completion, and device list entry are ready. A QPN lookup can therefore reach a QP that is still being constructed. Move siw_qp_add() to the end of siw_create_qp(), after QP initialization and before adding the QP to the siw device list.

    Publication Mise à jour
  8. CVE-2026-68416

    Non évaluéeEPSS 0,16%Aucun correctif publié

    mtd: fix double free and WARN_ON in add_mtd_device() error paths

    In the Linux kernel, the following vulnerability has been resolved: mtd: fix double free and WARN_ON in add_mtd_device() error paths When device_register() or mtd_nvmem_add() fails inside add_mtd_device() for a partition, the error handling triggers mtd_release() via put_device() or device_unregister(). mtd_release() calls release_mtd_partition() which frees the mtd_info structure. However, callers such as mtd_add_partition() and add_mtd_partitions() also call free_partition() in their error paths, resulting in a double free. Additionally, release_mtd_partition() hits WARN_ON(!list_empty( &mtd->part.node)) because the partition node is sti

    Publication Mise à jour
  9. CVE-2026-68414

    Élevée · CVSS 7.5EPSS 0,23%Aucun correctif publié

    wifi: cfg80211: cancel sched scan results work on unregister

    In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel sched scan results work on unregister cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a driver result notification while a scheduled scan request is present. The work callback recovers the containing cfg80211_registered_device and then locks the wiphy and walks the scheduled-scan request list. wiphy_unregister() already makes the wiphy unreachable and drains rdev work items before cfg80211_dev_free() can release the object, but it does not drain sched_scan_res_wk. A queued or running result work item can therefore cross the unreg

    Publication Mise à jour
  10. CVE-2026-68413

    Non évaluéeEPSS 0,2%Aucun correctif publié

    wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one()

    In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one() The memory allocated in the ipw2100_alloc_device() function is not freed in some of the error paths in ipw2100_pci_init_one(). Fix that by converting the direct return into a goto to the error path return. The error path when pci_enable_device() fails cannot jump to fail, since at this point priv is not set, so perform error handling inline.

    Publication Mise à jour
  11. CVE-2026-68412

    Moyenne · CVSS 6.7EPSS 0,2%Aucun correctif publié

    wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan()

    In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan() If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks. Use the existing error handling path to fix it.

    Publication Mise à jour
  12. CVE-2026-68411

    Non évaluéeEPSS 0,18%Aucun correctif publié

    wifi: mac80211_hwsim: clamp virtio RX length before skb_put

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: clamp virtio RX length before skb_put hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by the device straight to skb_put() on a fixed-size receive skb. A backend reporting a length larger than the skb tailroom drives skb_put() past the buffer end and hits skb_over_panic() -- a host-triggerable guest panic (denial of service). Clamp the length to the skb's available room before skb_put(). A conforming device never reports more than the posted buffer size, so valid frames are unaffected; a truncated over-report then fails the length

    Publication Mise à jour
  13. CVE-2026-68410

    Non évaluéeEPSS 0,22%Aucun correctif publié

    wifi: libertas: fix memory leak in helper_firmware_cb()

    In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix memory leak in helper_firmware_cb() helper_firmware_cb() neglects to free the single-stage firmware image after a successful async load, leading to a memory leak in the USB firmware-download path. Fix this memory leak by calling release_firmware() immediately after lbs_fw_loaded() returns. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present i

    Publication Mise à jour
  14. CVE-2026-68409

    Élevée · CVSS 8.8EPSS 0,26%Aucun correctif publié

    wifi: mac80211: defer link RX stats percpu free to RCU

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The f

    Publication Mise à jour
  15. CVE-2026-68408

    Non évaluéeEPSS 0,17%Aucun correctif publié

    wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock

    In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock When a netlink socket that owns a PMSR session is closed, cfg80211_release_pmsr() clears the request's nl_portid and queues pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously. If the interface tears down concurrently, cfg80211_pmsr_wdev_down() is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk) to wait for any running work. The work function acquires wiphy_lock via guard(wiphy) before calling process_abort. This is a deadlock: wdev_down holds wiphy_lock and blocks inside can

    Publication Mise à jour
  16. CVE-2026-68407

    Non évaluéeEPSS 0,17%Aucun correctif publié

    wifi: nl80211: free RNR data on MBSSID mismatch

    In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: free RNR data on MBSSID mismatch nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR entries than MBSSID entries. The rejected RNR allocation has not been attached to the beacon data yet, so free it before returning the error.

    Publication Mise à jour
  17. CVE-2026-68406

    Non évaluéeEPSS 0,18%Aucun correctif publié

    wifi: cfg80211: validate PMSR FTM preamble range

    In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate PMSR FTM preamble range PMSR FTM request parsing accepts preamble values outside the enumerated nl80211 preamble range. Reject out-of-range values before using them in the parser capability bit test using the policy. [drop unnecessary check]

    Publication Mise à jour
  18. CVE-2026-68405

    Non évaluéeEPSS 0,22%Aucun correctif publié

    wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock ieee80211_do_stop() removes AP_VLAN packets from the parent AP ps->bc_buf while holding ps->bc_buf.lock with IRQs disabled. It then calls ieee80211_free_txskb() before dropping the lock. ieee80211_free_txskb() is not just a passive SKB release. For SKBs with TX status state it can report a dropped frame through cfg80211/nl80211, and that path can reach netlink tap transmit. This is the same reason the pending queue cleanup in ieee80211_do_stop() already unlinks SKBs under the queue lock and frees them after IRQ stat

    Publication Mise à jour
  19. CVE-2026-68404

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    wifi: cfg80211: use wiphy work for socket owner autodisconnect

    In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain

    Publication Mise à jour
  20. CVE-2026-68403

    Non évaluéeEPSS 0,18%Aucun correctif publié

    wifi: brcmfmac: initialize SDIO data work before cleanup

    In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: initialize SDIO data work before cleanup brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before allocating the ordered workqueue. If that allocation fails, the function jumps to fail and calls brcmf_sdio_remove(). brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the work item before the first failure path that can reach brcmf_sdio_remove(), so the cleanup path always observes a valid work object. This issue was found by our static analysis tool and then confirmed by manual review of the probe error path and the remove

    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →