p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-oracle-6.8 · Page n° 171

Vulnérabilités publiées pour linux-oracle-6.8 au cours des 30 derniers jours : 794. Présentes dans le catalogue KEV : 0.

RSS ↗ JSON ↗
Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 10028

  1. CVE-2026-68169

    Non évaluéeEPSS 0,21%Aucun correctif publié

    mptcp: pm: userspace: fix use-after-free in get_local_id

    In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: userspace: fix use-after-free in get_local_id In mptcp_pm_userspace_get_local_id(), the address entry is looked up under spinlock, but its id is read after dropping the lock. A concurrent deletion can free the entry between the unlock and the read, leading to UAF. The race window is narrow. It was reproduced only with a locally constructed stress test that repeatedly overlaps an MP_JOIN SYN with a MPTCP_PM_CMD_SUBFLOW_DESTROY request. However, the KASAN report below confirms that the race is reachable: [ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  2. CVE-2026-68166

    Non évaluéeEPSS 0,21%Aucun correctif publié

    userfaultfd: prevent registration of special VMAs

    In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from th

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  3. CVE-2026-68165

    Non évaluéeEPSS 0,21%Aucun correctif publié

    mm/damon/core: validate ranges in damon_set_regions()

    In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  4. CVE-2026-68164

    Non évaluéeEPSS 0,21%Aucun correctif publié

    mm/damon/core: disallow overlapping input ranges for damon_set_regions()

    In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: disallow overlapping input ranges for damon_set_regions() damon_set_regions() assumes the input ranges are sorted by the address and don't overlap each other. Hence the assumption was initially to be explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for regions setting") has mistakenly removed the validation. This can make DAMON behave in unexpected ways. At the best, the monitoring results snapshot will just look weird since there will be overlapping regions. DAMOS will also work weirdly, applying the same action

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  5. CVE-2026-68162

    Élevée · CVSS 7.8EPSS 0,2%Aucun correctif publié

    sctp: avoid auth_enable sysctl UAF during netns teardown

    In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCTP control socket after changing net.sctp.auth_enable. The handler gets the per-net SCTP state from ctl->data, so an already opened sysctl file can still target a network namespace while that namespace is being torn down. SCTP previously registered its per-net sysctls from sctp_defaults_init(), while the control socket is created later from sctp_ctrlsock_init(). This exposed a window during initialization where auth_enable was writable before net->sctp.ctl_sock existed, and a teardow

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  6. CVE-2026-68161

    Critique · CVSS 9.8EPSS 0,68%Aucun correctif publié

    sctp: close UDP tunnel sockets during netns teardown

    In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  7. CVE-2026-68160

    Critique · CVSS 9.8EPSS 0,77%Aucun correctif publié

    ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps()

    In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps() reads snap_trace_len from the wire-format ceph_mds_caps header and uses it unconditionally to build a fake end pointer (snaptrace + snaptrace_len) that is later handed to ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case: snaptrace = h + 1; snaptrace_len = le32_to_cpu(h->snap_trace_len); p = snaptrace + snaptrace_len; ... case CEPH_CAP_OP_IMPORT: if (snaptrace_len) { ... if (ceph_update_snap_trace(mdsc, snaptr

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  8. CVE-2026-68159

    Critique · CVSS 9.8EPSS 0,74%Aucun correctif publié

    libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE

    In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exce

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  9. CVE-2026-68158

    Critique · CVSS 9.8EPSS 0,71%Aucun correctif publié

    libceph: Fix multiplication overflow in decode_new_up_state_weight()

    In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow()

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  10. CVE-2026-68157

    Élevée · CVSS 7.5EPSS 0,7%Aucun correctif publié

    libceph: guard missing CRUSH type name lookup

    In the Linux kernel, the following vulnerability has been resolved: libceph: guard missing CRUSH type name lookup Localized read selection can walk a parent bucket whose name exists in the CRUSH map while its type has no matching entry in type_names. get_immediate_parent() then dereferences a NULL type_cn and passes an invalid pointer into strcmp(), causing a null-ptr-deref. Skip such malformed parent buckets unless both the bucket name and type name metadata are present. This keeps malformed hierarchy data from crashing locality lookup and safely falls back to "not local". [ idryomov: add WARN_ON_ONCE ]

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  11. CVE-2026-68156

    Critique · CVSS 9.8EPSS 0,69%Aucun correctif publié

    libceph: refresh auth->authorizer_buf{,_len} after authorizer update

    In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authorizer() caches au->buf->vec.iov_base and au->buf->vec.iov_len in struct ceph_auth_handshake. These cached values are then used by the messenger connect code when sending the authorizer. ceph_x_update_authorizer() can rebuild the authorizer when a newer service ticket is available. If the rebuilt authorizer no longer fits in the existing buffer, ceph_x_build_authorizer() drops its reference to au->buf and allocates a new one. If this is the final reference, ceph_buffer_put() frees the

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  12. CVE-2026-68155

    Élevée · CVSS 7.5EPSS 0,7%Aucun correctif publié

    libceph: Reject monmaps advertising zero monitors

    In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a monitor to the client. This monmap contains information about the existing monitors in the cluster. Currently, a monmap indicating that there are zero monitors in the cluster is treated as valid. However, it is impossible to have zero monitors in the cluster and still receive a valid monmap from a monitor. Therefore, such a monmap must be corrupted and should be treated as invalid. Furthermore, a monmap with a monitor count of zero can subsequently cras

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  13. CVE-2026-68154

    Critique · CVSS 9.8EPSS 0,71%Aucun correctif publié

    libceph: reject zero bucket types in crush_decode

    In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decoding the CRUSH map so the invalid state never reaches the mapper.

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  14. CVE-2026-68153

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    libceph: remove debugfs files before client teardown

    In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the monitor client before removing the per-client debugfs files. A concurrent read of the monmap debugfs file can enter monmap_show() after ceph_monc_stop() has freed monc->monmap, triggering a use-after-free. Remove the debugfs files before stopping the OSD and monitor clients. debugfs_remove() drains active handlers and prevents new accesses, so the debugfs callbacks can no longer race the rest of client teardown.

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  15. CVE-2026-68152

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    amt: fix use-after-free in AMT delayed works

    In the Linux kernel, the following vulnerability has been resolved: amt: fix use-after-free in AMT delayed works When an AMT device is removed, pending delayed works can still access the freed amt_dev structure, which may result in kernel crashes or memory corruption. amt_dev_stop() cancels req_wq and discovery_wq with cancel_delayed_work_sync(), but these works can be scheduled again from event_wq after the cancellation. This allows delayed works to access the freed amt_dev structure after the netdev has been released. The following is a simple race scenario: CPU0 CPU1 amt_dev_stop() cancel_delayed_work_sync()

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  16. CVE-2026-68151

    Non évaluéeEPSS 0,18%Aucun correctif publié

    binfmt_elf_fdpic: only honour the first PT_INTERP

    In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: only honour the first PT_INTERP The program header scan handles PT_INTERP from a switch nested in the scan loop, so its break leaves the switch and not the loop. A binary carrying more than one PT_INTERP runs the case again and overwrites both interpreter_name and interpreter. The previous name allocation leaks and so does the previous interpreter reference, along with the write denial open_exec() took on it. The denial is never released, so the file stays unwritable for as long as the system runs. An unprivileged caller reaches this with a crafted binary

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  17. CVE-2026-68149

    Élevée · CVSS 8.4EPSS 0,14%Aucun correctif publié

    fs: preserve ACL_DONT_CACHE state in forget_cached_acl()

    In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meant to be a constant state for the inode for filesystems that want to opt out of posix acl caching. Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api") used this facility to opt out of posix acl caching for fuse inodes with fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl). The commit also takes care to gate the forget_all_cached_acls() call in fuse_set_acl() on fc->posix_acl because there is no need for it, but there are other placed in fuse code w

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  18. CVE-2026-68148

    Élevée · CVSS 7.8EPSS 0,09%Aucun correctif publié

    fscrypt: Add missing superblock check in find_or_insert_direct_key()

    In the Linux kernel, the following vulnerability has been resolved: fscrypt: Add missing superblock check in find_or_insert_direct_key() The legacy 'fscrypt_direct_keys' table caches master keys that are used by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY. It's just a global table for all filesystems (since the keys can be provided by the legacy process-subscribed keyrings mechanism, which makes it difficult to reuse super_block::s_master_keys). The entries in it ('struct fscrypt_direct_key') do contain a super_block pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when the last inode that references t

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  19. CVE-2026-68147

    Élevée · CVSS 7.8EPSS 0,14%Aucun correctif publié

    fscrypt: Avoid dynamic allocation in fscrypt_get_devices()

    In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls fscrypt_get_devices() to get the filesystem's list of block devices, then iterates over them and calls blk_crypto_config_supported(), blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one. Currently, the block device pointers are placed in a dynamically allocated array. This dynamic allocation is problematic because: - It can fail, especially at the fscrypt_destroy_inline_crypt_key() call site when it's invoked for inode evict

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  20. CVE-2026-68146

    Non évaluéeEPSS 0,18%Aucun correctif publié

    ftrace: Add global mutex to serialize trace_parser access

    In the Linux kernel, the following vulnerability has been resolved: ftrace: Add global mutex to serialize trace_parser access In ftrace, the trace_parser structure is allocated and initialized when a trace file is opened, and is subsequently used across write and release handlers to parse user input. The affected handler paths and their specific functions are: - Open paths: ftrace_regex_open(), ftrace_graph_open() - Write paths: ftrace_regex_write(), ftrace_graph_write() - Release paths: ftrace_regex_release(), ftrace_graph_release() If userspace opens a trace file descriptor and shares it across multiple threads, concurrent write c

    linux-oracle-6.8Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →