Vulnérabilités de linux-gcp · Page n° 165

rds: drop incoming messages that cross network namespace boundaries

In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looks up the destination socket using a global rhashtable keyed solely on (addr, port, scope_id). Network namespaces are not part of the key, so a sender in netns A can deliver an incoming message (inc) to a socket that lives in a different netns B. When this happens, inc->i_conn points to an rds_connection whose c_net is netns A, but the receiving rs lives in netns B. Once the child process that created netns A exits, cleanup_net() calls rds_loop_exit_net() -> rds_loop_kill_conns() -> r

• Mettez à jour vers 6.8.0-1071.79

dpaa2-switch: put MAC endpoint device on disconnect

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the d

• Mettez à jour vers 6.8.0-1071.79

dpaa2-eth: put MAC endpoint device on disconnect

In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after

• Mettez à jour vers 6.8.0-1071.79

iommu/amd: Wait for completion instead of returning early in iommu_completion_wait()

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Wait for completion instead of returning early in iommu_completion_wait() need_sync is a per-IOMMU flag shared by all domains and devices behind that IOMMU. It is set whenever a command is queued with sync == true and cleared when a completion-wait (CWAIT) command is queued. However, a cleared need_sync only means that a covering CWAIT has been queued, not that all previously queued commands have actually completed in hardware. iommu_completion_wait() read need_sync locklessly and returned early when it was false. This breaks the "block until all previously queu

• Mettez à jour vers 6.8.0-1071.79

nfp: Check resource mutex allocation

In the Linux kernel, the following vulnerability has been resolved: nfp: Check resource mutex allocation nfp_cpp_resource_find() allocates a CPP mutex handle for the matching resource-table entry and then reports success. nfp_resource_try_acquire() immediately passes that handle to nfp_cpp_mutex_trylock(). However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens for a matching table entry, the resource lookup still returns success and the following trylock dereferences a NULL mutex pointer while opening the resource. nfp_resource_acquire() already treats failure to allocate the table mutex as -ENOMEM. Do the same for the

• Mettez à jour vers 6.8.0-1071.79

wan: wanxl: Only reset hardware after BAR mapping

In the Linux kernel, the following vulnerability has been resolved: wan: wanxl: Only reset hardware after BAR mapping wanxl_pci_init_one() stores the freshly allocated card in driver data before the PLX BAR is mapped. Several early probe failures then unwind through wanxl_pci_remove_one(), including failure to allocate the coherent status area or to restore the DMA mask. wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and wanxl_reset() dereferences card->plx. On those early failures card->plx is still NULL, so the error path can dereference a NULL MMIO pointer. Only issue the hardware reset once the BAR mapping exists. The

• Mettez à jour vers 6.8.0-1071.79

wifi: mwifiex: bound uAP association event IEs to the event buffer

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound uAP association event IEs to the event buffer mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the (re)association request IEs that the firmware copies into the event: sinfo->assoc_req_ies = &event->data[len]; len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control; sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len; event->len is supplied by the device firmware and is never validated, and the subtraction is unchecked. assoc_req_ies points into adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in

• Mettez à jour vers 6.8.0-1071.79

iommu/amd: Bound the early ACPI HID map

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bound the early ACPI HID map The ivrs_acpihid command-line parser appends entries to a fixed four-element early_acpihid_map array. Unlike the sibling IOAPIC and HPET parsers, it does not reject a fifth entry before incrementing the map size. Check the capacity at the common found label before parsing the HID and UID or writing the entry.

• Mettez à jour vers 6.8.0-1071.79

iommu/intel: Fix out-of-bounds memset in dmar_latency_disable()

In the Linux kernel, the following vulnerability has been resolved: iommu/intel: Fix out-of-bounds memset in dmar_latency_disable() dmar_latency_disable() intends to zero out only the single latency_statistic entry for the given type, but the memset size was computed as sizeof(*lstat) * DMAR_LATENCY_NUM, which clears the entire array starting from &lstat[type]. When type > 0, this writes beyond the end of the allocated array, corrupting adjacent memory. Fix by using sizeof(*lstat) to clear only the target entry.

• Mettez à jour vers 6.8.0-1071.79

tipc: serialize udp bearer replicast list updates

In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs from the encap receive softirq (via tipc_udp_rcast_disc()) without rtnl_lock(), so it can race the cleanup delete and corrupt the list: list_del corruption. prev->next should be ffff8880298d7ab8, but was ffff88802449ad38. (prev=ffff888027e3ec98) kernel BUG at lib/list_debug.c:62! RIP: __list_del_entry_valid_or_report+0x17a/0x200 Workqueue: events cleanup_bearer Ca

rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled

In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst is never initialized because inet6_init() exits before addrconf_init() is called to initialize it. An attempt to bind an RDS socket to an ipv6 address results in a crash in __ipv6_chk_addr_and_flags() KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0 Call Trace: <TASK> ipv6_chk_addr+0x3b/0x50 rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp] rds_trans_get_preferred+0x15d/0x2d0 [rds]

sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid

In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the capacity limit for ep->auth_chunk_list, allowing it to hold up to 20 chunk entries (param_hdr.length up to 24). However, the copy destination asoc->c.auth_chunks in struct sctp_cookie is only SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16 chunks are added, sctp_association_init() memcpy overflows the destination by up to 4 bytes. Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching the destination capacity.

• Mettez à jour vers 6.8.0-1071.79

pds_core: fix deadlock between reset thread and remove

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix deadlock between reset thread and remove pci_reset_function() acquires device_lock before performing the reset. pdsc_remove() is called by the PCI core with device_lock already held. If pdsc_pci_reset_thread() is running when pdsc_remove() is called, destroy_workqueue() will block waiting for the work to complete, while the work is blocked waiting for device_lock - deadlock. Use pci_try_reset_function() which uses pci_dev_trylock() internally. This acquires both the device lock and the PCI config access lock without blocking - if either lock is contended, it

• Mettez à jour vers 6.8.0-1071.79

pds_core: fix use-after-free on workqueue during remove

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix use-after-free on workqueue during remove In pdsc_remove(), the workqueue is destroyed before pdsc_teardown() is called. This ordering allows two paths to queue work on the destroyed workqueue: 1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error path in pdsc_devcmd_locked() queues health_work. 2. A NotifyQ event can trigger the ISR and queue work before free_irq() is called in pdsc_teardown(). Fix by moving destroy_workqueue() after pdsc_teardown() so the workqueue outlives every queuer; destroy_workqueue() then flushes any work still pe

• Mettez à jour vers 6.8.0-1071.79

pds_core: fix auxiliary device add/del races

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix auxiliary device add/del races Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler. They serialize on config_lock, but neither guards the slot under it correctly. add() registers and stores a new auxiliary device without first checking the slot, so a second add of an already-populated slot leaks the first device. del() makes that check outside config_lock, so two concurrent dels can both pass it; the first clears the slot, and the second dereferences a NULL pointer. Chec

• Mettez à jour vers 6.8.0-1071.79

sctp: validate stream count in sctp_process_strreset_inreq()

In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g

• Mettez à jour vers 6.8.0-1071.79

net: mctp i3c: clean up notifier and buses if driver register fails

In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() registers the I3C bus notifier and then walks the existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL) before registering the I3C device driver. If i3c_driver_register() fails, the function returns the error directly, leaving the notifier registered and every mctp_i3c_bus object created for the existing buses allocated. The notifier is left pointing into the module that failed to load and the bus list is leaked. Mirror the module exit path on this failure: unregiste

• Mettez à jour vers 6.8.0-1071.79

tipc: fix infinite loop in __tipc_nl_compat_dumpit

In the Linux kernel, the following vulnerability has been resolved: tipc: fix infinite loop in __tipc_nl_compat_dumpit cmd->dumpit callback can return a negative errno, causing an infinite loop due to the while(len) condition. As the loop never terminates, genl_mutex is never released, and other tasks waiting on it starve in D state. Check dumpit's return value, propagate it and jump to err_out on error.

• Mettez à jour vers 6.8.0-1071.79

cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths

In the Linux kernel, the following vulnerability has been resolved: cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and cifs_close_deferred_file_under_dentry(), when a pending deferred close is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to add the file to the local processing list may fail under memory pressure. The loop breaks immediately, but the cancelled work is no longer pending (it would have called _cifsFileInfo_put()), and the cfile is never added to file_head for processing. The cifsFileInfo reference and the open se

wifi: mt76: mt7915: guard HE capability lookups

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available.

• Mettez à jour vers 6.8.0-1071.79