In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
rpcrdma_cm_event_handler() falls through to the disconnected: label
on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no
matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED.
The kref then underflows during connect teardown and
rpcrdma_xprt_disconnect() operates on a freed ep.
Reference counts across a normal connection lifecycle:
rpcrdma_ep_create() kref_init ->1
rpcrdma_xprt_connect() ep_get ->2 (before post_recvs)
RDMA_CM_EVENT_ESTABLISHED ep_get
In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Check frwr_wp_create() during connect
frwr_wp_create() creates the singleton Memory Region used to encode
padding for Write chunks whose payload length is not XDR-aligned. Its
failure paths return a negative errno and leave ep->re_write_pad_mr set
to NULL.
rpcrdma_xprt_connect() currently ignores that return value. If
frwr_wp_create() fails after the rest of the connection setup succeeds,
xprt_rdma_connect_worker() treats the connection attempt as successful
and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned
receive page length reaches rpcrd
In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix bcall rep leak and unbounded peek
rpcrdma_is_bcall() decodes a reply's first words to decide whether
the frame is a backchannel call. Two issues in that decode path
let a short or malformed reply leak the receive buffer and drain
the Receive queue.
First, the speculative peek
p = xdr_inline_decode(xdr, 0);
/* five p++ reads follow */
asks xdr_inline_decode() for zero bytes, which returns xdr->p
without consulting xdr->end. The five subsequent __be32 reads can
then walk up to 20 bytes past the wire payload into stale regbuf
contents and misclassify t
xprtrdma: Repost Receive buffers for malformed replies
In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Repost Receive buffers for malformed replies
rpcrdma_wc_receive() decrements the transport's Receive count for
every completion before it dispatches a successful Receive to
rpcrdma_reply_handler(). The handler must post a replacement
Receive WR before returning unless ownership of the rep has moved
elsewhere, as on the backchannel path.
Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC
senders and posting Receives") moved the Receive refill out of
rpcrdma_wc_receive(), where it had run ahead of every reply, into
rpcrdma_reply_handler() so that the r
xfrm: Fix dev use-after-free in xfrm async resumption
In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardow
apparmor: check label build before no_new_privs test
In the Linux kernel, the following vulnerability has been resolved:
apparmor: check label build before no_new_privs test
aa_change_profile() builds a replacement label with
fn_label_build_in_scope() before the no_new_privs subset check. The build
helper can fail and return NULL or an ERR_PTR, but the result was passed
to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL()
check.
Reuse the existing target-label build failure handling immediately after
the build. This preserves the current audit handling while preventing the
subset helper from dereferencing an invalid label.
apparmor: aa_label_alloc use aa_label_free on alloc failure
In the Linux kernel, the following vulnerability has been resolved:
apparmor: aa_label_alloc use aa_label_free on alloc failure
aa_label_alloc() allocates a secid before allocating or taking the label
proxy. If the later proxy step fails, the error path only freed the label
memory, leaking any resources initialized by aa_label_init().
Use aa_label_free() on the failure path so partially initialized labels
release their secid and other label resources before the backing memory is
freed.
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are en
In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix xfrm state cache insertion race
The xfrm input state cache insertion code checks the validity of
the state before acquiring the global xfrm_state_lock. Thus it's
possible for someone else to kill the state after it passed the
validity check, and then the insertion will add the dead state
to the cache.
Fix this by moving the validity check inside the lock.
This entire function is called on the input path, where BH must
be off (e.g., the caller of this function xfrm_input acquires
its spinlocks without disabling BH).
So there is no need to disable BH here or tak
xfrm: validate selector family and prefixlen during match
In the Linux kernel, the following vulnerability has been resolved:
xfrm: validate selector family and prefixlen during match
syzbot reported a shift-out-of-bounds in xfrm_selector_match()
due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched
against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set).
Fix this by:
- Rejecting mismatched families in xfrm_selector_match.
- Returning false in addr4_match if prefixlen > 32.
- Returning false in addr_match if prefixlen > 128 (prevents overflow).
drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm
The cleanup tail of kfd_criu_resume_svm() walks
svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata
without removing it from the list. The list head is left pointing at
freed kmalloc-96 objects.
A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty()
reads the dangling ->next (use-after-free), the loop walks freed entries,
and each is kfree()'d again (double-free). This is reachable by an
unprivileged render-group user via /dev/kfd with no capabilities required.
Add list_del()
octeontx2-pf: Fix leak of SQ timestamp buffer on teardown
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix leak of SQ timestamp buffer on teardown
The send-queue timestamp ring is allocated with qmem_alloc() when
timestamping is used, but otx2_free_sq_res() never freed sq->timestamps,
leaking that memory across ifdown and device removal. Add the missing
qmem_free() alongside the other SQ companion buffers.
sctp: hold socket lock when dumping endpoints in sctp_diag
In the Linux kernel, the following vulnerability has been resolved:
sctp: hold socket lock when dumping endpoints in sctp_diag
SCTP_DIAG endpoint dumping was traversing endpoint address lists without
holding lock_sock(), while those lists could change concurrently via
socket operations (e.g., bindx changes). This creates a race where
nla_reserve() counts addresses under RCU protection, but the subsequent
copy may see fewer entries, potentially leaking uninitialized memory to
userspace.
Fix this by:
- Taking a reference on each endpoint during hash traversal
- Moving socket operations (lock_sock()) outside read_lock_bh()
- Serializing addr
flow_dissector: check device type before reading ETH_ADDRS
In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: check device type before reading ETH_ADDRS
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow diss
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column
ieee802154: fix kernel-infoleak in dgram_recvmsg()
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: fix kernel-infoleak in dgram_recvmsg()
KMSAN reported a kernel-infoleak in move_addr_to_user():
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
include/linux/instrumented.h:131 [inline]
BUG: KMSAN: kernel-infoleak in _inline_copy_to_user
include/linux/uaccess.h:205 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120
lib/usercopy.c:26
instrument_copy_to_user include/linux/instrumented.h:131 [inline]
_inline_copy_to_user include/linux/uaccess.h:205 [inline]
_copy_to_user+0xcc/0x120 lib/usercopy.c:26
copy_to_user include/linux/uaccess.h:236
md/raid1: fix writes_pending and barrier reference leaks on write failures
In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix writes_pending and barrier reference leaks on write failures
raid1_make_request() acquires a writes_pending reference with
md_write_start() before calling raid1_write_request(). Several failure
paths in raid1_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid1_write_request() return a status indicating whether the write
request was successfully queued. This allows raid1_make_request() to
call md_write_end() when raid1_write_request() fails.
Additiona
md/raid10: fix writes_pending leak on write request failures
In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request
md/raid10: fix writes_pending and barrier reference leaks on discard failures
In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return with
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
In the Linux kernel, the following vulnerability has been resolved:
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
When a read is retried, raid1_read_request() may be called with a
pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT
read, the bio is completed and the function returns immediately. In this
case the existing r1_bio is leaked.
This fixes a leak of pre-allocated r1_bio structures for retried reads.