Vulnérabilités de linux-gkeop · Page n° 187

mm: do file ownership checks with the proper mount idmap

In the Linux kernel, the following vulnerability has been resolved: mm: do file ownership checks with the proper mount idmap Ever since idmapped mounts were introduced, inode ownership checks (for side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done against the nop_mnt_idmap, which completely ignores the file's mount's idmap. This results in odd edgecases like: 1) mount/bind-mount with an idmap userA:userB:1 2) userB runs an owner_or_capable() check on file that is owned by userA on-disk/in-memory, but owned by userB after idmap translation 3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied

• Mettez à jour vers 6.8.0-1052.56

iommufd: Set upper bounds on cache invalidation entry_num and entry_len

In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per ite

• Mettez à jour vers 6.8.0-1052.56

KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU on every run. The vGIC list register save and restore use used_lrs as their loop bound and expect it to stay within the number of implemented list registers. While this is generally the case, flush_hyp_vcpu() copies vgic_v3 verbatim and does not enforce this, so a value provided by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2 (host -> EL2). Fix by clamping used_lrs to the number of implemented list registers after the cop

• Mettez à jour vers 6.8.0-1052.56

KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vCPU context into the hyp's private vCPU on every run. ctxt_to_vcpu() expects a guest context to have a NULL __hyp_running_vcpu, which is only ever set on the host context, so that it resolves the vCPU via container_of(). While this is generally the case, flush_hyp_vcpu() copies the context verbatim and does not enforce this, so a value provided by the host is dereferenced at EL2 (host -> EL2). Fix by clearing __hyp_running_vcpu after the copy.

• Mettez à jour vers 6.8.0-1052.56

KVM: guest_memfd: Treat memslot binding offset+size as unsigned values

In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Treat memslot binding offset+size as unsigned values When binding a memslot to a guest_memfd file, treat the offset and size as unsigned values to fix a bug where the sum of the two can result in a false negative when checking for overflow against the size of the file. Passing unsigned values also avoids relying on somewhat obscure checks in other flows for safety, and tracks the offset and size as they are intended to be tracked, as unsigned values. On 64-bit kernels, the number of pages a memslot contains and thus the size (and offset) of its guest_mem

fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()

In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX.

• Mettez à jour vers 6.8.0-1052.56

i2c: core: fix adapter deregistration race

In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter deregistration race Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name).

• Mettez à jour vers 6.8.0-1052.56

Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read

• Mettez à jour vers 6.8.0-1052.56

Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds rea

• Mettez à jour vers 6.8.0-1052.56

Input: elan_i2c - prevent division by zero and arithmetic underflow

In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - prevent division by zero and arithmetic underflow The Elan I2C touchpad driver queries the device for its physical dimensions and trace counts to calculate the device resolution and width. However, if the device firmware or device tree provides invalid zero values for x_traces or y_traces, it results in a fatal division-by-zero exception leading to a kernel panic during device probe. Add checks to ensure these parameters are non-zero before performing the division. If invalid trace values are detected, fall back to a safe default of 1. Additionally, prev

• Mettez à jour vers 6.8.0-1052.56

Input: goodix - clamp the device-reported contact count

In the Linux kernel, the following vulnerability has been resolved: Input: goodix - clamp the device-reported contact count goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a mal

• Mettez à jour vers 6.8.0-1052.56

Input: iforce - bound the device-reported force-feedback effect index

In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds

• Mettez à jour vers 6.8.0-1052.56

Input: mms114 - fix touch indexing for MMS134S and MMS136

In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by expli

• Mettez à jour vers 6.8.0-1052.56

Input: touchwin - reset the packet index on every complete packet

In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes diffe

• Mettez à jour vers 6.8.0-1052.56

Input: mms114 - reject an oversized device packet size

In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device registe

• Mettez à jour vers 6.8.0-1052.56

RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The so

• Mettez à jour vers 6.8.0-1052.56

RDMA/siw: bound Read Response placement to the RREAD length

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connec

• Mettez à jour vers 6.8.0-1052.56

fuse: re-lock request before returning from fuse_ref_folio()

In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning.

• Mettez à jour vers 6.8.0-1052.56

xfs: don't wrap around quota ids in dqiterate

In the Linux kernel, the following vulnerability has been resolved: xfs: don't wrap around quota ids in dqiterate LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot for ID_MAX, then this addition will truncate to zero and the iteration starts over. Fix this by casting to u64.

• Mettez à jour vers 6.8.0-1052.56

wifi: iwlwifi: mld: validate sta_mask before ffs() in BA session handlers

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: validate sta_mask before ffs() in BA session handlers Three BA session handlers use ffs(ba_data->sta_mask) - 1 to derive a station ID without checking that sta_mask is non-zero. When sta_mask is zero, ffs() returns 0 and the subtraction wraps to 0xFFFFFFFF, causing an out-of-bounds access on fw_id_to_link_sta[]. Add WARN_ON_ONCE(!ba_data->sta_mask) guards before each ffs() call, consistent with the existing check in iwl_mld_ampdu_rx_start().